What sets the RPM SXS "Big Fatty" HD Silicone Intake Tube apart from every other aftermarket tube on the market is its uncompromised 6-ply, 7mm thick construction—engineered to guarantee zero bottlenecking at the rear shock body or either mounting flange!
This is an absolute MUST-HAVE reliability and performance upgrade for stock, tuned, and heavily modified Polaris machines alike. The factory rubber intake tube (OEM #1241537) is notoriously thin, weak, and prone to severe heat-induced collapse. As under-hood and ambient temperatures rise during hard riding, the soft stock tube sucks inward on itself, severely choking off airflow and starving your engine right when you need power most.
The RPM SXS "Big Fatty" fixes this major design flaw permanently. Crafted with 6 plies of heat-resistant Nomex-reinforced silicone totaling an ultra-thick 7mm, this tube simply DOES NOT collapse under extreme engine heat or intense turbo suction. We completely eliminated the restrictive factory molding near the rear shock, enlarging the internal diameter as much as physically possible to deliver maximum, turbulence-free intake air volume straight to your airbox. Installation is a 100% direct drop-in replacement that takes less than 10 minutes, complete with heavy-duty silicone-safe stainless steel T-bolt clamps!
(Looking to build the ultimate intake setup? Pair this with our matching Airbox-to-Throttle Body HD Silicone Charge Tube Kit!)
Uncompromised "Big Fatty" High-Flow Design: Oversized internal diameter with zero necked-down bottlenecks at the shock body or mounting ends.
Ultra-Thick 6-Ply / 7mm Silicone Construction: Engineered to guarantee zero heat-induced collapsing or flexing under high engine load or extreme ambient heat.
Direct High-Performance OEM Upgrade: Directly replaces weak, failure-prone factory rubber intake tube (OEM Part #1241537).
Maximized CFM Airflow & Velocity: Eliminates factory restrictive molding to allow your engine to breathe freely for improved throttle response.
Silicone-Safe Heavy-Duty Hardware: Includes two high-torque stainless steel T-bolt clamps for a blowout-proof, airtight seal.
Fast 10-Minute Installation: 100% direct bolt-on upgrade requiring zero custom cutting, trimming, or modifications.
(1) RPM SXS "Big Fatty" 6-Ply HD Silicone Intake Tube (Bed-to-Airbox)
(2) Heavy-Duty Stainless Steel T-Bolt Clamps
Polaris RZR Pro XP / Pro XP 4: 2020–2026
Polaris RZR Turbo R / Turbo R 4: 2022–2026
Polaris Pro S / Pro S 4: 2025–2026
This part is compatible with 24 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2026 | Polaris | RZR Pro S | 2 Seat |
| 2026 | Polaris | RZR Pro S | 4 Seat |
| 2026 | Polaris | RZR Pro XP | 2 Seat |
| 2026 | Polaris | RZR Pro XP | 4 Seat |
| 2025 | Polaris | RZR Pro S | 2 Seat |
| 2025 | Polaris | RZR Pro S | 4 Seat |
| 2025 | Polaris | RZR Pro XP | 2 Seat |
| 2025 | Polaris | RZR Pro XP | 4 Seat |
| 2024 | Polaris | RZR Pro XP | 2 Seat |
| 2024 | Polaris | RZR Pro XP | 4 Seat |
| 2024 | Polaris | RZR Turbo R | 2 Seat |
| 2024 | Polaris | RZR Turbo R | 4 Seat |
| 2023 | Polaris | RZR Pro XP | 2 Seat |
| 2023 | Polaris | RZR Pro XP | 4 Seat |
| 2023 | Polaris | RZR Turbo R | 2 Seat |
| 2023 | Polaris | RZR Turbo R | 4 Seat |
| 2022 | Polaris | RZR Pro XP | 2 Seat |
| 2022 | Polaris | RZR Pro XP | 4 Seat |
| 2022 | Polaris | RZR Turbo R | 2 Seat |
| 2022 | Polaris | RZR Turbo R | 4 Seat |
| 2021 | Polaris | RZR Pro XP | 2 Seat |
| 2021 | Polaris | RZR Pro XP | 4 Seat |
| 2020 | Polaris | RZR Pro XP | 2 Seat |
| 2020 | Polaris | RZR Pro XP | 4 Seat |
Have questions or want to place an order but need more information! Contact us!