RZR XP 1000

• 8-Ply radial construction
• Specialized rubber compound for supreme traction and control
• Superb tread wear
• Excellent for extreme terrain
• 7/8" tread depth

 Packard Performance introduces Ultra Light Wheels: If you want both performance and incredible looks in a SXS (side by side) wheel look no further.. These two-piece wheels are made of strong lightweight 6061 billet centers that bolt to the wheel drum using stainless hardware.

The listed price is per individual wheel.

Vehicle Fitment:

• Can-Am X3 (All models)
  
• Honda Talon
  

• Polaris (RZR All models)
  
• Yamaha YXZ 1000R
  
• Arctic Cat Wildcat (All models)

Wheel Specs: 

• 15"x7" – 11 lb 8 oz

• 15"x11" - 13 lb 13 oz
  

Wheel Offset:

• Positive = 3 1/2"
  
• Negative = 3 1/2"

• Positive = 5 1/2"
  
• Negative = 5 1/2"

Notes:

• Retighten all wheel center bolts periodically to ensure proper torque (17-foot lbs.)
• Red grade Loctite on wheels center bolts is required
• Retighten all wheel lug nuts periodically to ensure proper tightness
• Wheel weight may vary slightly due to different bolt patterns
• Warranty is void if wheel centers are removed from wheel drum

Engineered for the toughest jobs and most extreme terrain, these bearings are built for riders who push their vehicles to the limit. The tight seal protects the bearing from repeated rides on unforgiving terrain like sand or mud. The high-grade steel and top quality materials makes these bearings ideal for use with large tires or when traversing rocks. High lateral strength means these bearings can take heavy loads around tight corners or down steep grades with ease.

• ONE (1) Wheel Bearing. QTY 4 for all 4 wheel bearings.
• Specifically designed for riders who push their vehicles to the limit in work or play
• Improved seal holds up to repeated pressure washing and rides in mud, water, or sand
• Only bearings to pass an intensive mud slurry test – the best bearings for mudders
• Ideal for vehicles with large tires or heavy payloads
• We recommend a dealer installs these bearings
• Proper installation torque is a critical to bearing performance and life

2014 – 2022 RZR XP PLATFORM (ALL)

2” 4 point harness with Auto Style Buckle is here! Super easy to deal with and no latch and link to fuss with. Featuring sewn in harness pads for ultimate comfort. Great for kids or the weekend warrior on weekend trips. All black hardware, custom Hunter Safety Products logo super easy adjustments. Get in, buckle up, and GO! These are NOT SFI Certified, not intended for racing purposes. If you need SFI rated harnesses please see our 3” harness.

Looking for a clean, convenient way to mount your Switch Pro Pod? The Geiser Performance Switch Pro Tube Mount is the way to go.

Mount fits 1.75" tubing with a the SP-9100 system.

Does NOT include Switch Pro system.

Install:
1. Mark holes on tubing
2. Drill and tap tube to a 10-32 thread
3. Install Switch Pro onto mount with supplied 4-40 hardware
4. Install Switch Pro mount with supplied hardware

• Full Safety Glass
• Aluminum Frame with Powder Coat
• Standard Textured Black
• Air Flow Flap Adjusters

FITS 1000/1000 TURBO 2014-18 WITH SDR RACING CAGE

Keep you and your passengers safe from the elements with this full glass front windshield. Makes riding better rain or shine! BAMMMM!

Although similar in aesthetics to the Squadron® Pro, the application for the Sport varies.  The Squadron® Sport utilizes 4 LEDs producing an impressive 3,150 lumens at 26 watts making it ideal for near field, side/backup and scene lighting application. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Please note that this light does NOT include a harness and the applicable harness to this light is 640117

Includes:

• Squadron® Sport LED Light
• Mounting Bracket

 
Patterns:

Driving/Combo:  Maximum trail coverage in a single light.  The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road.  The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft.  This pattern is not suitable for driving. (Lighting Zone 7)

Our Squadron® Pro packs 4,900 Lumens at 40 watts that will truly annihilate the night. Don’t let this light fool you, although compact in size this LED auxiliary light will literally blind you with brightness. The Pro comes equipped with a sleek black gloss aluminum housing and outshines the competition through both appearance and performance. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Includes:

• Squadron® Pro LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Fuego, PreRunner, LaPaz, Squadron and SII.

It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.

Keizer Racing Wheels bring another great, ultra light wheel option to the market! 

SOLD AS INDIVIDUAL WHEEL. PLEASE ADJUST QUANTITY ACCORINGLY. 

Features:

• Two-Piece Billet Center
• Available in Black Anodized Finish OR Chrome Polished Finish
• Aircraft 6061 T6 Shell
• Non-Beadlock
• Reverse Hardware
  

These wheels are currently built to order. Please anticipate two to three weeks for a turn around time frame.

Keizer Racing Wheels bring another great, ultra light wheel option to the market! 

SOLD AS INDIVIDUAL WHEEL. PLEASE ADJUST QUANTITY ACCORINGLY. 

Features: 

• Two-Piece Billet Center
• Available in Black Anodized Finish OR Chrome Polished Finish
• Aircraft 6061 T6 Shell
• Non-Beadlock
• Reverse Hardware
  

These wheels are currently built to order. Please anticipate two to three weeks for a turn around time frame. These paddles/cuts are currently built to order. Please anticipate one week turn around times on in stock paddles and two to three weeks for out of stock paddles.   

The MB Whips Pro series is the ultimate 2 foot multi-color whip. With a 2 inch inner diameter tube and more leds than our 5 foot Flash whip, you are sure to make a statement. Like our Flash series, the Flash Pro features all of the awesome options you're used to with the MB Whips line including full bluetooth app and remote control, street legal integration, our innovating powered base design and so much more. Equip your ride with the best!

Already have Flash whips and want to add these to your LED Whip options, no problem. The Flash Pro uses the same bases and controllers as the Flash line so you are already wired and ready.

The Flash series quick release bases are the best on the market for two very simple reasons, they are quick and they are clean. Most synchronized whips on the market require a separate pigtail connection that you have to mess with every time you want to connect your whips, the Flash has evolved beyond that. The innovative Flash whip bases feature all the wiring that the whip needs built inside the base itself. Simply drop the whip on the base and you're 100% ready to go in about a second.

The Flash Pro Series Whips are not flexible. These are a very rigid setup, so you will want to mount them under the roofline if you are encountering trees or branches in your riding areas. We do have Springs available that work with this setup, but we would still recommend they be mounted in such a way as to avoid impacts.

Each Flash Pro Whip Pair Includes The Following:

Pair of Flash Pro 2ft whips

Pair of our powered quick release bases

Two premium black MB Whips flags

Two flag mount clamp sets

Two dust caps

Whip controller harness

Remote control

Quick install instructions

The Flash Synchronized Paired Whips are the absolute top of the line! With tight wrapped, high-output LEDS, combined with innovative features and the smoothest and fastest quick release system available, the Flash stands above the rest! The Flash whips also feature full Bluetooth control via the Pro RGB app AND an RF remote! Now you don't have to choose between app or remote as the Flash gives you both!

Want to see the Flash Whip Overview Video on Youtube? Click below!

https://youtu.be/j2i75X5sYQg

​

The Flash series quick release bases are the best on the market for two very simple reasons, they are quick and they are clean. Most synchronized whips on the market require a separate pigtail connection that you have to mess with every time you want to connect your whips, the Flash has evolved beyond that. The innovative Flash whip bases feature all the wiring that the whip needs built inside the base itself. Simply drop the whip on the base and you're 100% ready to go in about a second.

Each Flash Whip Pair Includes The Following:

Pair of whips in your selected size

Two premium, triple-stitched MB Whips flags

Two flag mount clamp sets

Two dust caps

Whip controller harness

Remote control

Generic quick install guide 

Our Flash Bluetooth enable controller harness will include 3 wires that can be used for street legal integration. The street-legal option will force the left or right whip to blink amber and turn both whips red when the brake is pressed. In order for this function to operate, the associated wires will need to see power only when the blinker or brake light is pressed.

2 Foot Whips - Over 150 5050 LEDs Per Whip - $249.95

3 Foot Whips - Over 250 5050 LEDs Per Whip - $279.95

4 Foot Whips - Over 350 5050 LEDs Per Whip - $309.95

5 Foot Whips - Over 450 5050 LEDs Per Whip - $319.95

Note: This kit does not include a full relay harness with a fuse and a switch. If you do not already have a wiring plan in mind, check out our plug n play wiring harness kit which will give you all the length of wire you need to install this setup, even on a 4 seat machine, and it will also include a relay, fuse and Lighted Whip switch. These harnesses are $30 and if this is ordered with the Flash whips, we will apply the proper spade terminals that come with this harness so it will be a true plug-n-play wiring solution.

Packard Performance introduces Ultra Light Wheels: If you want both performance and incredible looks in a SXS (side by side) wheel look no further. These two-piece wheels are made of strong lightweight 6061 billet centers that bolt to the wheel drum using stainless hardware.

The listed price is per individual wheel.

Vehicle Fitment:

• Can-Am X3 (All models)
  
• Honda Tallon
  

• Polaris (RZR All models)
  
• Yamaha YXZ 1000R
  
• Arctic Cat Wildcat (All models)

Wheel Specs:

• 15"x7" – 11 lb 8 oz

• 15"x11" - 13 lb 13 oz

Notes:

• Superficial blemishes will not be warrantied once tires have been mounted
• Check valve stem tightness before mounting a tire on the rim
• Retighten all wheel center bolts periodically to ensure proper torque (17-foot lbs.)
• Red grade Loctite on wheels center bolts is required
• Retighten all wheel lug nuts periodically to ensure proper tightness
• Wheel weight may vary slightly due to different bolt patterns
• Warranty is void if wheel centers are removed from wheel drum

Packard Performance introduces Ultra Light Wheels: If you want both performance and incredible looks in a SXS (side by side) wheel look no further. These two-piece wheels are made of strong lightweight 6061 billet centers that bolt to the wheel drum using stainless hardware.

The listed price is per individual wheel.

Vehicle Fitment:

• Can-Am X3 (All models)
  
• Honda Tallon
  

• Polaris (RZR All models)
  
• Yamaha YXZ 1000R
  
• Arctic Cat Wildcat (All models)

Wheel Specs:

• 15"x7" – 11 lb 8 oz

• 15"x11" - 13 lb 13 oz

Notes:

• Superficial blemishes will not be warrantied once tires have been mounted
• Check valve stem tightness before mounting a tire on the rim
• Retighten all wheel center bolts periodically to ensure proper torque (17-foot lbs.)
• Red grade Loctite on wheels center bolts is required
• Retighten all wheel lug nuts periodically to ensure proper tightness
• Wheel weight may vary slightly due to different bolt patterns
• Warranty is void if wheel centers are removed from wheel drum

Packard Performance introduces Ultra Light Wheels: If you want both performance and incredible looks in a SXS (side by side) wheel look no further. These two-piece wheels are made of strong lightweight 6061 billet centers that bolt to the wheel drum using stainless hardware.

The listed price is per individual wheel.

Vehicle Fitment:

• Can-Am X3 (All models)
  
• Honda Tallon
  

• Polaris (RZR All models)
  
• Yamaha YXZ 1000R
  
• Arctic Cat Wildcat (All models)

Wheel Specs: 

• 15"x7" – 11 lb 8 oz

• 15"x11" - 13 lb 13 oz
  

Wheel Offset:

• Positive = 3 1/2"
  
• Negative = 3 1/2"

• Positive = 5 1/2"
  
• Negative = 5 1/2"

Notes:

• Retighten all wheel center bolts periodically to ensure proper torque (17-foot lbs.)
• Red grade Loctite on wheels center bolts is required
• Retighten all wheel lug nuts periodically to ensure proper tightness
• Wheel weight may vary slightly due to different bolt patterns
• Warranty is void if wheel centers are removed from wheel drum

Packard Performance introduces Ultra Light Wheels: If you want both performance and incredible looks in a SXS (side by side) wheel look no further.  These two-piece wheels are made of strong lightweight 6061 billet centers that bolt to the wheel drum using stainless hardware.

The listed price is per individual wheel.

Vehicle Fitment:

Lug Pattern 4x137:

• Can Am X3 (All models)
  
• Honda Tallon
  

• Polaris (RZR All models)
  
• Yamaha YXZ 1000R
  
• Arctic Cat Wildcat (All models)

Wheel Specs: 

• 15"x7" – 11 lb 8 oz

• 15"x11" - 13 lb 13 oz

Wheel Offset:

• Positive = 3 1/2"
  
• Negative = 3 1/2"

• Positive = 5 1/2"
  
• Negative = 5 1/2"

Notes:

• Retighten all wheel center bolts periodically to ensure proper torque (17-foot lbs.)
• Red grade Loctite on wheels center bolts is required
• Retighten all wheel lug nuts periodically to ensure proper tightness
• Wheel weight may vary slightly due to different bolt patterns
• Warranty is void if wheel centers are removed from wheel drum

Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market.

We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability. No substitutions accepted. 

Our rods are fully covered by a no hassle no BS warranty. If you damage a rod in any way we guarantee to replace it no questions asked, at all. We stand behind everything we produce and leave no doubt at our level of customer satisfaction.

 Set inlcudes 4 rods total. 

2 Billet High Clearance

2 Billet Straight

All heims and needed hardware included. 

Replacement magnets for your Ibexx clutch kit.

• Magnets will fit most Ibexx clutch weights
• .85 grams
• 1.7 grams

Quantity is available in increments of 5.

Securely mount your Icom or Kenwood radio with your PCI intercom into your RZR Pro XP. This bracket is not compatible with the RZR Pro R.

 Available for Kenwood and Icom Radios

• All Hardware Included
• Compatible with RZR Pro XP.
• Not compatible with the RZR Pro R, the stock shifter knob is too close to the console bracket in Park. Check out our vertical bracket version for the RZR Pro XP and RZR Pro R. 

Our bracket centers up the radio and intercom right under the dash replacing the stock twist open storage box. The bracket is designed for plenty of knee room and installation is a breeze with only two new holes that must be drilled.

The bracket is Powder Coated in Satin Black and comes complete with hardware. This bracket is for use only with the Icom F5021 or Kenwood TK-7360 Two-way radio and 4 Link Pro, 4 Link Pro Elite, Trax and Com X Race intercom. It will not work with the Vertex, or other brand radios.

Compatible with Polaris RZR models with a twist lock open storage box. If your storage box is a pull open, use this bracket.

The OE plastic Torsion Spring Retainer over-stresses causing failure, its one of the weakest parts of your differential. SANDCRAFT redesigned and doubled the engagement surface areas using billet aluminum, with internal and external engagement properties that raise the bar in durability and dynamic loads. Each Billet Torsion Spring Retainer comes with a pre-installed hardened spring retaining dowel pin.

BILLET TORSION SPRING RETAINER – 14-20 XP 1000 / 16-20 XP TURBO

This SANDCRAFT kit is the only complete solution to the RZR’s drivetrain issues and failures. Our patented carrier bearing/driveline combo to strengthen and straighten the driveline, a front differential bearing and seal kit to smooth out and quiet down an angry diff, a motor mount kit for reinforcement of the rear end and a grease whip to make maintenance quick and easy. This kit has it all.

INCLUDES
• Driveline (front and rear, phased and balanced)
• Gen 3 Carrier Bearing with Grease Whip
• Front Differential Bearing and Seal Kit with upgraded Gear Pin
• Billet Motor Mount Stands with Kevlar Infused Bushings
• 4130 TIG welded Motor Mount Tube

COMPLETE DRIVETRAIN SOLUTION – 2017-2021 RZR XP 1000 – 2 SEAT

If your machine is leaking oil from the axles/output shaft, or if you are rebuilding the transmission, the SANDCRAFT seals are a must have. After years of R&D we’ve been able to create the most durable, highest heat-rated seal on the market. Designed to precisely fit your machine, these seals will keep your bearings and gears clean by keeping contamination out.

TRANSMISSION SEAL KIT – 2014-2021 RZR XP 1000

Bundle and save with the Polaris RZR Turbo Driveline and Carrier Bearing Combo! Finally you can solve one of the largest issues with the Polaris RZR’s drivetrain with our upgraded Driveline and Carrier Bearing Combo! Stop all vibration with a true phased and balanced driveline along with correcting the operating angle. This is the perfect solution for the smoothest ride possible!

Rated three times stronger than stock, our upgraded driveline consists of larger U-joints, larger yokes, larger stub shaft with master spline and larger diameter chromoly shafts with double the wall thickness when compared the stock/OEM Polaris drivelines. When you operate your UTV over 40 MPH you are exceeding what the driveline is rated for. Our driveline was engineered for your machines capabilities and much, much more.

INCLUDES
• DRIVELINE (FRONT AND REAR PHASED AND BALANCED)
• CARRIER BEARING (GEN3 WILL BE INSTALLED ON THE DRIVELINE)

WE ARE THE ONLY COMPANY IN THE WORLD WITH THIS DESIGN SO DON’T WASTE YOUR TIME WITH THE COPYCATS.

SANDCRAFT Motorsports has developed the only true solution for driveline vibration and premature wear. The SANDCRAFT Carrier Bearings use the patented auto set angle feature to correct the driveline angle across multiple UTV platforms. Correcting the driveline angle results in less wear on the output of the transmission and the input of the front differential by eliminating side loading of the bearings. The Carrier Bearing extends the life of the drivetrain. Our Carrier Bearings are fully GREASABLE while having 3 layers of protection to keep dirt, sand, mud and water out. The 2-piece design will dramatically lower installation time and routine maintenance. Correcting the angle of your driveline has never been easier.

WHY PATENT A CARRIER BEARING?
The Carrier Bearing is only part of what we’re correcting with our patent. Your stock driveline angle is severely skewed. This means each joint is experiencing unneeded stress on every rotation. This extreme angle causes loss of power, noise and premature failure. The SANDCRAFT Carrier Bearing is a critical upgrade because it straightens the driveline to the optimal position, re-gains the lost power and improves the entire drivetrain. NOBODY ELSE CORRECTS THIS PROBLEM.

CARRIER BEARING – GEN3 – 2014-2020 XP 1000