Regular price
$599.95
Sale price
$389.95
Save $210.00
Gen 4 Ski-Doo / Lynx 850 Turbo Q-Muf Titanium Chambered
Combine whisper-quiet trail manners with full-throttle performance and ultra-lightweight titanium construction for your Gen 4 chassis! The RPM Q-Muf is a high-performing, free-flowing, mechanically chambered quiet muffler engineered specifically for Gen 4 Ski-Doo and Lynx 850 Turbo snowmobiles. Only slightly louder than factory sound levels at idle, it delivers massive gains in exhaust velocity, throttle responsiveness, and weight savings.
The secret to the Q-Muf's performance lies in its intelligent internal acoustic architecture. At low RPM and idle, exhaust gases flow through a series of precision pass-through baffles and mechanical chambers to deliver a deep, whisper-quiet sound signature. Under Wide-Open Throttle (WOT) and full boost, exhaust flow loads the primary chambers and automatically overflows into pass-through channels—allowing exhaust gases to vent freely without power loss, restriction, or backpressure spikes.
Constructed entirely from 100% Titanium with fully welded internals, the Q-Muf weighs in at an astonishing 3.8 lbs total. The uniquely designed oval-domed top and bottom muffler body eliminates thermal hot spots and dead zones, ensuring smooth exhaust scavenging. It features an integrated bottom titanium snow plate to block fumes and packed snow from entering the chassis tunnel when submerged in deep powder, as well as an ultra-tough dual-wall titanium exit tip built to withstand hard impacts from rocks and tree stumps.
Performance Metrics & Weight Savings:
Horsepower Gain: +3 to +4 HP Increase @ Full Boost
Total System Weight:3.8 lbs (Sheds massive weight off the front chassis)
Material & Construction: Full Titanium Structure with Fully Welded Internals
Sound Level Profile: Slightly louder than factory at idle; free-flowing and controlled under WOT
Exit Tip Construction: Heavy-Duty Dual-Wall Titanium
Warranty: Backed by RPM's 3-Year Manufacturer Warranty
SHOT System Compatibility: 100% compatible with Ski-Doo SHOT starting technology
Features:
Smart Mechanical Chambered Design: Transitions seamlessly between whisper-quiet baffled idling and high-CFM free-flowing exhaust pathways under full boost.
Sheds Massive Front-End Weight: Extremely lightweight 3.8 lb titanium build improves front-end agility, side-hilling control, and deep powder flotation.
3–4 HP Performance Increase: Maximizes exhaust gas velocity to improve power delivery and deliver instant throttle response.
Integrated Bottom Snow Plate: Built-in titanium plate seals the belly pan to keep snow and exhaust fumes out of the tunnel when submerged in deep snow.
Heavy-Duty Dual-Wall Titanium Tip: Protrudes further than competitor mufflers for clean exhaust deflection while shielding the outlet from rock and stump impacts.
Oval Domed Muffler Body: Prevents thermal hot spots and exhaust fume dead zones for maximum gas velocity and longevity.
Over-Built Mounting Brackets: Extra-duty reinforced titanium mounts prevent bracket fatigue and failure under severe mountain riding abuse.
Drop-In Bolt-On Installation: Installs directly into original factory mount locations with zero body cutting or ECU re-flashing required.
RPM Gen 4 2020-2022 Ski-Doo 850 Turbo Stainless Lightweight Sport Muffler
Regular price
$289.95
Sale price
$246.95
Save $43.00
Gen 4 Ski-Doo 850 Turbo Stainless Lightweight Sport Muffler
Upgrade your sled’s throttle response, weight balance, and exhaust tone with the RPM SXS Sport Performance Muffler, engineered specifically for 2020–2022 Ski-Doo and Lynx Gen 4 Turbo snowmobiles! Built for aggressive mountain riding and deep backcountry powder, this lightweight performance muffler delivers an immediate +4 HP gain while shedding a massive 8.4 lbs right off the nose of your sled—weighing in at just 7 lbs total.
Designed to produce a deep, throaty, authoritative mountain exhaust note without being overly loud or obnoxious, this muffler retains the ability to pass the SAE J-2567 stationary sound test at below 88 dB. Constructed from heavy-duty stainless steel and 100% TIG-welded, it features a rugged dual-wall exit tip engineered to deflect rocks, ice, and hidden stumps without crushing or deforming.
Installation is a true bolt-on-and-go process that retains your factory EGT sensor and requires zero permanent sled modifications or extra hardware.
Features:
+4 Horsepower Gain: Increases exhaust flow and sharpens turbo throttle response across the RPM range.
8.4 lbs Weight Savings: Weighs just 7 lbs total, drastically reducing front-end weight for easier side-hilling and quicker handling in technical terrain.
SAE J-2567 Sound Compliant: Produces a deep, rich mountain tone while remaining under the 88 dB stationary sound threshold.
Heavy-Duty Dual-Wall Exit Tip: Reinforced dual-wall tip design resists dents, crushing, and damage from rocks, stumps, and hard impacts.
Stainless Steel & 100% TIG-Welded: Built to withstand extreme turbo exhaust gas temperatures (EGTs), moisture, and brutal backcountry abuse.
Retains Factory Systems: Direct bolt-on design preserves full compatibility with your factory EGT sensor and the Ski-Doo SHOT starting system.
No Tuning Required: Direct bolt-on installation—install it and ride with zero ECU modifications needed.
Looking to tone down the volume even further for sensitive riding areas or long trail approaches? Add our high-flowing perforated quiet core insert, which slides directly into the bottom exit of the muffler.
Installation Note: Securing the quiet core requires drilling one small mounting hole in the tip to bolt it in place (all required mounting hardware is included).
What's Included:
(1) RPM SXS Stainless Steel Sport Performance Muffler
Direct bolt-on replacement for all Gen 4 850 E-TEC Turbo platforms (fully compatible with Ski-Doo SHOT starting system):
Ski-Doo Gen 4 Turbo Models: 2020–2022 (Summit, Freeride, Backcountry, Renegade — All Trims)
Lynx Gen 4 Turbo Models: 2020–2022 (Boondocker, Shredder — All Trims)
Compatibility
This part is compatible with 6 vehicle(s)
Year
Make
Model
Trim
2022
Lynx
850 Turbo
Gen 4
2022
Ski-Doo
850 Turbo
Gen 4
2021
Lynx
850 Turbo
Gen 4
2021
Ski-Doo
850 Turbo
Gen 4
2020
Lynx
850 Turbo
Gen 4
2020
Ski-Doo
850 Turbo
Gen 4
RPM SXS
RPM Gen 4 2020-2022 Ski-Doo / Lynx 850 Turbo TITANIUM Lightweight Sport Muffler
Regular price
$489.95
Sale price
$349.95
Save $140.00
Ski-Doo 850 Turbo TITANIUM Lightweight Sport Muffler
Drop maximum weight, sharpen throttle response, and unleash proven horsepower on your Gen 4 chassis with RPM’s Titanium Lightweight Sport Muffler for Ski-Doo and Lynx 850 Turbo models! Engineered for extreme alpine powder, technical tree riding, and high-elevation performance, this ultra-lightweight muffler sheds a massive 10.8 lbs off the front chassis while delivering an additional +4 HP and razor-sharp throttle response across the entire powerband.
Constructed entirely from premium, 100% TIG-welded titanium, this muffler weighs in at a featherlight 4.6 lbs total. It features a high-durability dual-wall exit tip designed specifically to protect against harsh impacts from hidden rocks, stumps, and dense timber. Despite the substantial increase in exhaust flow and dramatic weight reduction, the muffler produces a deep, rich mountain tone that remains compliant—passing the SAE J-2567 stationary sound test at under 88 dB.
Installation is 100% bolt-on with no machine modifications or extra brackets required. It retains full compatibility with the factory OEM EGT sensor as well as the Ski-Doo SHOT hot-start system!
Performance Metrics & Weight Savings:
Horsepower Gain: +4 HP Increase
Total System Weight:4.6 lbs
Total Weight Savings: Sheds 10.8 lbs compared to the bulky factory muffler
Material: 100% Titanium with TIG-welded construction
Exit Tip Construction: Heavy-Duty Dual-Wall Titanium
SHOT System Compatibility: 100% compatible with Ski-Doo SHOT starting technology
Optional Sound Tuning Component:
🔊 OPTIONAL HIGH-FLOW QUIET CORE INSERT:
Further Sound Control: Available with an optional high-flowing perforated quiet core insert that installs directly into the base of the muffler exit tube for even quieter operation. (Requires drilling one small securing hole; includes all necessary mounting hardware).
Features:
+4 HP Performance Gain: Optimizes backpressure and exhaust scavenging to deliver immediate horsepower gains and crisp throttle response.
Sheds 10.8 lbs of Front-End Weight: Ultra-lightweight titanium build dramatically reduces chassis weight for maximum agility, effortless side-hilling, and easy boondocking.
Trail & Forest Compliant Sound Signature: Deep, throaty mountain exhaust note that satisfies performance demands while remaining compliant under 88 dB.
Heavy-Duty Dual-Wall Exit Tip: Double-wall tip design shields the exhaust outlet from crushed rocks, logs, and tree stump impacts.
Retains OEM EGT Sensor: Pre-threaded fitting seamlessly accommodates the factory exhaust gas temperature sensor.
100% Direct Bolt-On Setup: Uses original factory mounting points and spring locations with zero body cutting or ECU re-flashing required.
What's Included:
(1) RPM SXS Gen 4 Titanium Lightweight Sport Muffler Assembly
(1) Factory EGT Sensor Mounting Bung (Integrated)
(1) High-Flow Perforated Quiet Core Insert Kit with Hardware(Optional - selected at checkout)
Fitment:
Direct bolt-on replacement for Gen 4 chassis Ski-Doo and Lynx 850 Turbo snowmobile models:
RPM Gen 5 2023-2026 Ski-Doo 850 NA Titanium Chambered Muffler
Regular price
$629.95
Save $-629.95
Ski-Doo Gen 5 NA Titanium Chambered Muffler
Combine whisper-quiet trail manners with maximum 2-stroke power gains and ultra-lightweight titanium construction! The RPM N.A. Q-Muf is a high-performing, free-flowing, mechanically chambered quiet muffler engineered specifically for Naturally Aspirated (N.A.) Gen 5 Ski-Doo and Lynx 850 E-TEC snowmobiles. Only slightly louder than factory sound levels at idle, it delivers massive gains in exhaust velocity, throttle responsiveness, and weight savings.
The secret to the Q-Muf's performance lies in its intelligent internal acoustic architecture. At low RPM and idle, exhaust gases flow through a series of precision pass-through baffles and mechanical chambers to deliver a deep, whisper-quiet sound signature. Under Wide-Open Throttle (WOT), exhaust flow loads the primary chambers and automatically overflows into pass-through channels—allowing exhaust gases to vent freely without power loss, restriction, or backpressure spikes.
Constructed entirely from 100% Titanium with fully welded internals, the Q-Muf weighs in at an astonishing 4.9 lbs total, shedding 11+ lbs off the front chassis compared to the stock muffler. The uniquely designed oval-domed top and bottom muffler body eliminates thermal hot spots and dead zones, ensuring smooth exhaust scavenging. It features an integrated bottom titanium snow plate to block fumes and packed snow from entering the chassis tunnel when submerged in deep powder, as well as an ultra-tough dual-wall titanium exit tip built to withstand hard impacts from rocks and tree stumps.
Performance Metrics & Weight Savings:
Horsepower Gain: +2 to +4 HP Increase
Total System Weight:4.9 lbs
Total Weight Savings: Sheds 11+ lbs compared to the heavy stock muffler
Material & Construction: Full Titanium Structure with Fully Welded Internals
Sound Level Profile: Slightly louder than factory at idle; free-flowing and controlled under WOT
Exit Tip Construction: Heavy-Duty Dual-Wall Titanium
Warranty: Backed by RPM's 3-Year Manufacturer Warranty
ECU Tuning Required: None (Direct drop-in and go)
Features:
Smart Mechanical Chambered Design: Transitions seamlessly between whisper-quiet baffled idling and high-CFM free-flowing exhaust pathways under full throttle.
Sheds 11+ lbs of Front-End Weight: Extremely lightweight 4.9 lb titanium build improves front-end agility, side-hilling control, and deep powder flotation.
2–4 HP Performance Increase: Maximizes exhaust gas velocity to improve power delivery and deliver instant throttle response in technical terrain.
Integrated Bottom Snow Plate: Built-in titanium plate seals the belly pan to keep snow and exhaust fumes out of the tunnel when submerged in deep snow.
Heavy-Duty Dual-Wall Titanium Tip: Protrudes further than competitor mufflers for clean exhaust deflection while shielding the outlet from rock and stump impacts.
Oval Domed Muffler Body: Prevents thermal hot spots and exhaust fume dead zones for maximum gas velocity and longevity.
Over-Built Mounting Brackets: Extra-duty reinforced titanium mounts prevent bracket fatigue and failure under severe mountain riding abuse.
100% Direct Bolt-On Setup: Uses original factory mounting points and spring locations with zero body cutting or ECU re-flashing required.
Titanium Governor Cup Bolt Set, Screw Button (QTY 6)
Shed rotating mass, eliminate corrosion, and secure your primary clutch governor cup with RPM’s Grade 5 Titanium Governor Cup Bolt Kit! Precision-engineered as a direct, high-strength upgrade for factory OEM steel hardware (OEM Part #250000757), this 6-piece bolt set fits high-output Can-Am UTVs and Ski-Doo snowmobiles equipped with BRP pDrive and turbo clutches.
Machined from aerospace-grade Grade 5 (Ti-6Al-4V) Titanium, these M8 x 25mm hex flange screws handle severe rotational RPM, violent clutch harmonics, and intense heat cycles without stretching, shearing, or galling. Upgrading to titanium lowers rotational inertia at the clutch spider and ensures consistent clamping force, eliminating flex and extending internal component life.
Thread / Dimensions: M8 x 1.25 x 25mm Hex Flange Screw
Direct OEM Hardware Replacement: Replaces BRP OEM #250000757
Threadlocker Requirement: Blue Medium-Strength Threadlocker required on threads during installation
⚠️ TORQUE & INSTALLATION CAUTION:
Torque Reduction Rule: When replacing factory steel hardware with Grade 5 Titanium, reduce the manufacturer's specified torque rating by 10% to 15% to prevent thread fatigue in aluminum clutch components and achieve proper fastener stretch.
Threadlocker: Always apply a small drop of Blue Medium-Strength Loctite to clean threads prior to torquing down to safeguard against hardware back-out from high-RPM harmonics.
Features:
Grade 5 Titanium Construction: Unmatched tensile yield strength, superior heat dissipation, and zero risk of rust, corrosion, or thread seizure.
Reduces Rotating Inertia: Shaves weight off the primary clutch assembly to promote faster throttle response and smoother shift dynamics.
Direct OEM Hardware Drop-In: Machined to exact factory length and thread pitch for a seamless, bolt-on replacement into the clutch assembly.
Integrated Hex Flange Design: Distributes clamping loads evenly across the governor cup to prevent binding, localized stress cracking, and hardware distortion.
What's Included:
(6) RPM SXS Grade 5 Titanium M8 x 25mm Hex Flange Governor Cup Bolts
Fitment:
Direct replacement for governor cup / button hardware on BRP pDrive and turbo primary clutches across Can-Am UTV and Ski-Doo snowmobile platforms:
Can-Am UTV Platforms:
Can-Am Maverick X3 Turbo Models (with pDrive Primary Clutch): 2022–2024 (Turbo RR, X DS, X RS, X RC, X MR, MAX)
RPM Gen 5 Ski-Doo 850 NA TITANIUM Snowmobile Sport Muffler 2023-26 Etec Rev
Regular price
$489.95
Save $-489.95
RPM TITANIUM Sport Series Race Weight Muffler
Take your sled's weight balance, throttle response, and exhaust tone to the podium with the RPM SXS Titanium Sport Series Race-Weight Muffler! Built specifically for 2023–2026 Ski-Doo Gen 5 850 E-TEC models, this ultra-lightweight full-titanium performance muffler tips the scales at just 4.9 lbs, shedding a massive 11+ lbs right off the front end of your machine while delivering a dyno-proven +3 HP gain.
Constructed from 100% aerospace-grade titanium with a compact 9.5" x 6" muffler body, this system is engineered for riders who demand razor-sharp throttle response, effortless side-hilling, and an unmistakable two-stroke bark. Sitting right in the middle of the RPM sound chart, the Sport Series delivers an aggressive, crisp performance tone ideal for snocross/backcountry racing, deep mountain riding, and open, lower-populated terrain.(Looking for a quieter, near-stock exhaust note? Check out our Chambered Muffler series!)
Installation is a straightforward, direct bolt-on fit right to your stock OEM expansion chamber with no clutching or ECU tuning required—just bolt it on and rip.
Features:
100% Full Titanium Construction: Ultra-strong, corrosion-proof titanium build handles extreme exhaust temperatures and harsh backcountry abuse at a fraction of steel weight.
Massive 11+ lbs Weight Savings: Weighing in at an ultra-light 4.9 lbs, this muffler dramatically reduces nose weight for quicker turn-in and superior handling in technical terrain.
+3 Horsepower Gain & Crisp Throttle Response: Improves exhaust scavenging for an immediate bump in power and snappier off-idle response.
Compact 9.5" x 6" Muffler Body: Space-saving race-weight canister drops cleanly into the chassis with zero interference.
Balanced Performance Sound: Sits right in the sweet spot of the RPM sound scale—delivering an aggressive, head-turning tone built for mountain riding and racing without being overly harsh.
No Clutching or Tuning Required: Engineered to run seamlessly with factory fuel mapping and clutching right out of the box.
Direct Bolt-On Installation: Mates directly to the stock OEM expansion chamber and includes easy-to-follow installation instructions.
What's Included:
(1) RPM SXS Full Titanium Sport Series Race-Weight Muffler (9.5" x 6" Body)
Fits:
Direct bolt-on replacement for naturally aspirated Ski-Doo Gen 5 850 E-TEC platforms (mates directly to stock OEM expansion chamber):
Ski-Doo Gen 5 850 E-TEC Models: 2023–2026 (Summit, Freeride, Backcountry, Renegade, MXZ — All Trims)
Compatibility
This part is compatible with 4 vehicle(s)
Year
Make
Model
Trim
2026
Ski-Doo
850 E-TEC
Gen 5 NA
2025
Ski-Doo
850 E-TEC
Gen 5 NA
2024
Ski-Doo
850 E-TEC
Gen 5 NA
2023
Ski-Doo
850 E-TEC
Gen 5 NA
RPM SXS
RPM Gen 5 Ski-Doo 850 NA Stainless Snowmobile Sport Muffler 2023-26 Etec Rev
Regular price
$289.95
Save $-289.95
RPM Stainless Steel Sport Series Race Weight Muffler
Upgrade the performance, tone, and weight of your Gen 5 sled with RPM’s Stainless Steel Sport Performance Muffler for Ski-Doo 850 E-TEC models! Positioned right in the sweet spot of RPM’s sound chart, this Sport Series muffler delivers a rich, deep, and sporty exhaust note—perfect for backcountry powder, mountain carving, and trail riding without being overbearing.
Engineered with a 9.5" x 6" oval muffler body, this full stainless system connects directly to your stock OEM expansion chamber. It sheds over 8+ lbs of nose weight off the front chassis while unlocking an immediate +3 horsepower gain and significantly sharper throttle response across the entire RPM range.
Built to handle extreme winter abuse, this system installs in minutes with zero clutching modifications, ECU re-flashing, or fuel tuning required!
Performance Metrics & Weight Savings:
Horsepower Gain: +3 HP Increase
Muffler Unit Weight:8.0 lbs
Total Chassis Weight Savings: Sheds 8+ lbs compared to the stock muffler
Sound Profile: Sport Tone — Mid-range volume (Deep, rich mountain exhaust note)
Body Dimensions: 9.5" x 6" Oval Stainless Shell
Clutching / Tuning Required: None (Direct bolt-on and go)
+3 HP Performance Gain: Maximizes exhaust flow velocity to deliver punchier power delivery and instant throttle response in deep snow.
Sheds 8+ lbs of Chassis Weight: Lightens the front end to improve agility, side-hilling control, and flotation in technical terrain.
Balanced Sport Sound Signature: Delivers a deep, throaty 2-stroke tone that sounds aggressive on the throttle while maintaining mid-range sound control.
Durable 304 Stainless Steel: Built from heavy-gauge stainless steel to resist rust, vibration, and deep snow pack impacts.
Direct OEM Expansion Chamber Fit: Connects seamlessly using factory spring locations for a fast, straightforward installation.
Zero ECU Tuning Required: Runs safely and efficiently on factory fuel maps and clutching calibrations.
What's Included:
(1) RPM SXS 9.5"x6" Stainless Steel Sport Performance Muffler Assembly
Fitment:
Direct bolt-on replacement for Gen 5 chassis Ski-Doo 850 E-TEC snowmobile models:
Combine whisper-quiet trail manners with maximum 2-stroke power gains and ultra-lightweight titanium construction for your Gen 4 chassis! The RPM N.A. Q-Muf is a high-performing, free-flowing, mechanically chambered quiet muffler engineered specifically for Naturally Aspirated (N.A.) Gen 4 Ski-Doo 850 E-TEC snowmobiles. Only slightly louder than factory sound levels at idle, it delivers massive gains in exhaust velocity, throttle responsiveness, and weight savings.
The secret to the Q-Muf's performance lies in its intelligent internal acoustic architecture. At low RPM and idle, exhaust gases flow through a series of precision pass-through baffles and mechanical chambers to deliver a deep, whisper-quiet sound signature. Under Wide-Open Throttle (WOT), exhaust flow loads the primary chambers and automatically overflows into pass-through channels—allowing exhaust gases to vent freely without power loss, restriction, or backpressure spikes.
Constructed entirely from 100% Titanium with fully welded internals, the Q-Muf weighs in at an astonishing 4.9 lbs total, shedding 11+ lbs off the front chassis compared to the stock muffler. The uniquely designed oval-domed top and bottom muffler body eliminates thermal hot spots and dead zones, ensuring smooth exhaust scavenging. It features an integrated bottom titanium snow plate to block fumes and packed snow from entering the chassis tunnel when submerged in deep powder, as well as an ultra-tough dual-wall titanium exit tip built to withstand hard impacts from rocks and tree stumps.
Performance Metrics & Weight Savings:
Horsepower Gain: +2 to +4 HP Increase
Total System Weight:4.9 lbs
Total Weight Savings: Sheds 11+ lbs compared to the heavy stock muffler
Material & Construction: Full Titanium Structure with Fully Welded Internals
Sound Level Profile: Slightly louder than factory at idle; free-flowing and controlled under WOT
Exit Tip Construction: Heavy-Duty Dual-Wall Titanium
Warranty: Backed by RPM's 3-Year Manufacturer Warranty
ECU Tuning Required: None (Direct drop-in and go)
Features:
Smart Mechanical Chambered Design: Transitions seamlessly between whisper-quiet baffled idling and high-CFM free-flowing exhaust pathways under full throttle.
Sheds 11+ lbs of Front-End Weight: Extremely lightweight 4.9 lb titanium build improves front-end agility, side-hilling control, and deep powder flotation.
2–4 HP Performance Increase: Maximizes exhaust gas velocity to improve power delivery and deliver instant throttle response in technical terrain.
Integrated Bottom Snow Plate: Built-in titanium plate seals the belly pan to keep snow and exhaust fumes out of the tunnel when submerged in deep snow.
Heavy-Duty Dual-Wall Titanium Tip: Protrudes further than competitor mufflers for clean exhaust deflection while shielding the outlet from rock and stump impacts.
Oval Domed Muffler Body: Prevents thermal hot spots and exhaust fume dead zones for maximum gas velocity and longevity.
Over-Built Mounting Brackets: Extra-duty reinforced titanium mounts prevent bracket fatigue and failure under severe mountain riding abuse.
100% Direct Bolt-On Setup: Uses original factory mounting points and spring locations with zero body cutting or ECU re-flashing required.
Tone down exhaust decibels and meet sound regulations on sensitive trails without sacrificing your turbo’s performance! The RPM SXS High-Flow Quiet Core Baffle is designed specifically for installation in RPM Ski-Doo Summit 850 Turbo mufflers.
Crafted with a high-flowing perforated core design, this quiet baffle insert smooths out aggressive exhaust pulse waves and lowers overall sound output while maintaining high exhaust velocity and low backpressure. It mounts directly into the bottom exit tube of your RPM muffler, making it an essential sound-tuning accessory for riders looking to reduce noise levels around residential areas, trailheads, or sound-restricted riding zones.
Installation is straightforward and secure—requiring only one small hole drilled into the muffler's lower exit tip to bolt the quiet core firmly into place.
Features:
Custom Decibel Reduction: Lowers sound output levels to help satisfy trail-compliance and local noise regulations.
High-Flow Perforated Internal Core: Engineered to reduce exhaust noise without restricting turbo airflow or robbing engine horsepower.
Secure Bolt-In Installation: Anchors tightly inside the exit tip to prevent rattling or ejection during aggressive mountain riding.
Durable Stainless Construction: Built to withstand extreme exhaust gas temperatures and harsh, wet alpine environments.
Complete Installation Kit: Ships complete with all necessary stainless steel mounting hardware.
(1) Set of Stainless Steel Securing Mounting Hardware
Fitment:
Direct fitment for RPM SXS aftermarket mufflers across the Ski-Doo Summit 850 Turbo platform:
Ski-Doo Summit 850 E-TEC Turbo / Turbo R (Gen 4 & Gen 5 Chassis): Fits all model years equipped with RPM SXS Sport or Titanium mufflers
Compatibility
This part is compatible with 14 vehicle(s)
Year
Make
Model
Trim
2026
Lynx
850 Turbo
Gen 5
2026
Ski-Doo
850 Turbo
Gen 5
2025
Lynx
850 Turbo
Gen 5
2025
Ski-Doo
850 Turbo
Gen 5
2024
Lynx
850 Turbo
Gen 5
2024
Ski-Doo
850 Turbo
Gen 5
2023
Lynx
850 Turbo
Gen 5
2023
Ski-Doo
850 Turbo
Gen 5
2022
Lynx
850 Turbo
Gen 4
2022
Ski-Doo
850 Turbo
Gen 4
2021
Lynx
850 Turbo
Gen 4
2021
Ski-Doo
850 Turbo
Gen 4
2020
Lynx
850 Turbo
Gen 4
2020
Ski-Doo
850 Turbo
Gen 4
RPM SXS
RPM Gen 4 Ski-Doo 850 NA TITANIUM Snowmobile Race Weight Silencer 2017-22 Etec Rev
Regular price
$424.95
Sale price
$381.95
Save $43.00
RPM Gen 4 Ski-Doo 850 NA TITANIUM Race Weight Silencer
Maximize weight savings and sharpen throttle response with RPM’s Titanium Race Weight Performance Muffler for Gen 4 Ski-Doo 850 E-TEC snowmobiles! Engineered specifically for mountain riders, drag racers, and backcountry powder hounds seeking ultimate performance, this ultra-lightweight titanium exhaust sheds an astounding 13+ lbs off the front chassis while unlocking an immediate +3 horsepower gain and razor-sharp throttle response.
Constructed from premium, high-grade titanium with a compact 4" outer diameter (OD) muffler body, the unit weighs in at a featherlight 3.5 lbs (3.0 lb muffler assembly) and connects directly to the factory OEM expansion chamber with zero modifications required. It delivers an aggressive, high-revving 2-stroke exhaust note that cuts through mountain air—making it ideal for open mountain terrain, closed-course racing, and backcountry riding where minimal chassis weight and instant power delivery are top priorities.
Installation is 100% bolt-on with no clutching, ECU re-flashing, or fuel tuning needed.
Performance Metrics & Weight Savings:
Horsepower Gain: +3 HP Increase
Muffler Unit Weight:3.0 lbs (3.5 lbs total kit weight)
Total Chassis Weight Savings: Sheds 13+ lbs compared to the heavy stock muffler
Sound Profile: Very Light & Loud — High-output, aggressive race tone
Material & Construction: Premium Titanium Construction with 4" OD Shell
Clutching / Tuning Required: None (Direct bolt-on and go)
Sensor Port Extension Wiring: The included EGT sensor port wiring extension is required ONLY for Ski-Doo Summit models. Do NOT use the sensor extension harness on MXZ or Renegade models.
Features:
+3 HP Performance Gain: Optimizes exhaust gas velocity to improve power delivery and deliver crisp, instant throttle response.
Sheds 13+ lbs of Front-End Weight: Extremely lightweight titanium construction drastically lightens the nose of your snowmobile for effortless side-hilling, carving, and boondocking.
Compact 4" Titanium Body: Built from premium titanium to withstand extreme exhaust gas temperatures, vibration, and deep snow pack.
Aggressive Race Exhaust Tone: High-energy exhaust note engineered for maximum performance output in backcountry and race environments.
Direct OEM Expansion Chamber Fit: Connects seamlessly to the stock expansion chamber using factory spring locations.
Zero ECU Tuning Required: Runs safely and cleanly on factory fuel maps and clutching setups without requiring a tuner.
RPM Gen 4 Ski-Doo 850 Stainless Snowmobile Race Weight Muffler
Drop maximum weight and sharpen throttle response with RPM’s Stainless Steel Race Weight Performance Muffler for Gen 4 Ski-Doo 850 E-TEC snowmobiles! Engineered specifically for mountain riders, drag racers, and backcountry powder hounds seeking maximum performance, this ultra-lightweight race exhaust sheds a massive 11+ lbs off the front chassis while unlocking an immediate +3 horsepower gain and razor-sharp throttle response.
Constructed from heavy-duty, corrosion-resistant 304 stainless steel, this 4" compact muffler body connects directly to the factory OEM expansion chamber with zero modifications required. It delivers an aggressive, high-revving 2-stroke exhaust note that cuts through mountain air—making it ideal for open mountain terrain, closed-course racing, and backcountry riding where light weight and instant power delivery are top priorities.
Installation is 100% bolt-on with no clutching, ECU re-flashing, or fuel tuning needed.
Performance Metrics & Weight Savings:
Horsepower Gain: +3 HP Increase
Muffler Unit Weight:5.0 lbs
Total Chassis Weight Savings: Sheds 11+ lbs compared to the heavy stock muffler
Sound Profile: Light & Loud — High-output, aggressive race tone
Clutching / Tuning Required: None (Direct bolt-on and go)
Installation & Sensor Wiring Note:
⚠️ FITMENT & INSTALLATION NOTE:
Sensor Port Extension Wiring: The included EGT sensor port wiring extension is required ONLY for Ski-Doo Summit models. Do NOT use the sensor extension harness on MXZ or Renegade models.
Features:
+3 HP Performance Gain: Optimizes exhaust gas velocity to improve power delivery and deliver crisp, instant throttle response.
Sheds 11+ lbs of Front Weight: Drastically lightens the nose of your snowmobile, making side-hilling, carving, and boondocking effortless.
4" Compact Stainless Body: Built from high-grade 304 stainless steel to handle high exhaust heat, severe vibration, and wet snow pack.
Aggressive Race Exhaust Tone: High-energy exhaust note engineered for maximum performance output in backcountry and race environments.
Direct OEM Expansion Chamber Fit: Connects seamlessly to the stock expansion chamber using factory spring locations.
Zero ECU Tuning Required: Runs safely and cleanly on factory fuel maps and clutching setups without requiring a tuner.