Maverick Trail

• World’s Best Belt Line
  
  
  • Manufacturing, quality control certifications — ISO-14001, ISO-9001, and IATF-16949.
  • 3rd Generation heavy-duty, high-twist Aramid Fiber cord for HIGH HORSEPOWER TENSILE LOAD requirements. Making it the strongest belt on the market, surpassing even our EX and Sand Storm lines.
  • Highest shock load rating to date being able to withstand the power of the 400hp machines.
  • Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
  • Bottom cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation.
  • Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature.
  • Latest bottom cog design for greater rotational efficiency at full shift.
  • Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature. • Aramid Fiber cord, versus polyester, wraps over bottom cogs for increased bottom cog strength.
  • Increased cord pop-out resistance.
  
  This belt is for the rider / racer that is looking for the latest in technology and proven performance.

Fitment: WORLD'S BEST Drive Belt Can-Am

• 2017-2020 X3 Maverick Turbo / X3 Max Turbo / X3 900 Turbo All Models
• 2018-2019 Maverick Sport / Trail 1000 / 800
• 2016-2019 Defender HD10/HD8
• OEM # 422280651 / 417300383 / 422280654

Grab a couple high quality flags for your whips! Incredible detail and built to last.

12X18 Flags

Quadruple stiched on the ends

Heavy Duty Knitted Polyester

Brass grommets

Sandcraft Destroyer Demon Paddle Tires

The Demon Paddle has the same height and depth as the Ripper, but offers a 14″ width that covers the whole tire to provide better traction. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Ripper Paddle Tires

The Ripper Paddle has a height of 15/16″, 11″ wide and is designed to RIP you out of the hole shot! Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

Sandcraft Destroyer Talon Paddle Tires

The Talon Paddle has the same height and depth as the Extreme, but offers a 14″ width that covers the whole tire to provide better traction. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Extremes Tire Package

The Extreme Paddle is 7/8″ tall, 11″ wide and offers a full 1/8″ thickness at the base of the paddle to give you a better grip for larger, heavier, and higher horsepower machines.

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

Sandcraft Destroyer Demon Paddle Tires

The Demon Paddle has the same height and depth as the Ripper, but offers a 14″ width that covers the whole tire to provide better traction. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Digger Paddle Tires

The Digger Paddle offers a height of 1 1/4″ and is 14″ wide. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Ripper Paddle Tires

The Ripper Paddle has a height of 15/16″, 11″ wide and is designed to RIP you out of the hole shot! Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

Sandcraft Destroyer Extremes Tire Package

The Extreme Paddle is 7/8″ tall, 11″ wide and offers a full 1/8″ thickness at the base of the paddle to give you a better grip for larger, heavier, and higher horsepower machines.

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

Sandcraft Destroyer Talon Paddle Tires

The Talon Paddle has the same height and depth as the Extreme, but offers a 14″ width that covers the whole tire to provide better traction. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Extremes Tire Package

The Extreme Paddle is 7/8″ tall, 11″ wide and offers a full 1/8″ thickness at the base of the paddle to give you a better grip for larger, heavier, and higher horsepower machines.

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

Sandcraft Destroyer Demon Paddle Tires

The Demon Paddle has the same height and depth as the Ripper, but offers a 14″ width that covers the whole tire to provide better traction. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Ripper Paddle Tires

The Ripper Paddle has a height of 15/16″, 11″ wide and is designed to RIP you out of the hole shot! Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

Sandcraft Destroyer Talon Paddle Tires

The Talon Paddle has the same height and depth as the Extreme, but offers a 14″ width that covers the whole tire to provide better traction. Price includes 4 tires (2 paddle rears and 2 front Mohawks).

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

This is a special order item and is not refundable.

Sandcraft Destroyer Extremes Tire Package 31x11x15

The Extreme Paddle is 7/8″ tall, 11″ wide and offers a full 1/8″ thickness at the base of the paddle to give you a better grip for larger, heavier, and higher horsepower machines.

Sandcraft Destroyer Mohawk Fronts:

• 2-ply rated (UTV specific)
• Ruff-buffed for better traction
• Helps pull UTV in 4-wheel drive
• Designed to eliminate push when turning on standard buffed tires

Not sure what paddle tires you need? Use the horsepower chart below. This shows paddle options in relation to horsepower rating and will guide you in making the right choice for your specific UTV.

For power, performance and comfort — you've come to the right place. The RM60 Kit with the RRP660 intercom and Ultimate headsets packs the most features while combining the best components for the ultimate communication system.

Intercom Features:

• iPhone Connect Port (cable sold seperately)
• All new transformer based platform
• 2 to 4 place with the ability to expand up to 8 places
• RF Shielded Extruded Housing
• VOX control for clear communications in loud environments
• Music In with auto muting
• Precision tune mic gain control
• Isolated grounds for eliminating ground loop issues
• High output amplifier for outstanding music listening

RM-60 Features:

• 60-Watt VHF Band Mobile Radio
• 20% more power than a 50-watt radio
• 20~30 mile range
• CTCSS/DCS tone codes
• Hand mic
• Adjustable power level
• ...and more

Everything you need in one complete kit to outfit your Jeep, side-by-side, SUV, or 4-wheel drive vehicle.

Connect two people to the RRP696 intercom, Alpha Audio helmet kits, powerful 60-watt RM-60 VHF radio and optional UTV specific Mount. Handle in-car communications and vehicle-to-vehicle with the best system available. Now in a convenient kit, you simply choose an optional UTV specific mount below and you're ready to go!

Intercom Features:

• Built-in Bluetooth For Music & Cell Phone Streaming
• High Output Amplifier for Bluetooth Functions
• Music Play/Pause & Cell Phone Connect/Disconnect Button
• Double Stacked Knob for Volume & VOX Control
• 2-Way Radio Ready
• Auxiliary Port for Hardwiring External Devices
• 2-4 Person Ready, Expandable up to 8 Places
• RF Shielded Extruded Housing
• Isolated grounds for eliminating ground loop issues
• Includes Mounting brackets and hardware

RM-60 Features:

• 60-Watt VHF Band Mobile Radio
• 20% more power than a 50-watt radio
• 20~30 mile range
• VHF frequency
• CTCSS/DCS tone codes
• Hand Mic
• Adjustable power level

Everything you need in one complete kit to outfit your Jeep, side-by-side, SUV, or 4-wheel drive vehicle.

Connect two people to the RRP696 intercom, Alpha Audio helmet kits, powerful 60-watt RM-60 VHF radio and optional UTV specific Mount. Handle in-car communications and vehicle-to-vehicle with the best system available. Now in a convenient kit, you simply choose an optional UTV specific mount below and you're ready to go!

Intercom Features:

• Built-in Bluetooth For Music & Cell Phone Streaming
• High Output Amplifier for Bluetooth Functions
• Music Play/Pause & Cell Phone Connect/Disconnect Button
• Double Stacked Knob for Volume & VOX Control
• 2-Way Radio Ready
• Auxiliary Port for Hardwiring External Devices
• 2-4 Person Ready, Expandable up to 8 Places
• RF Shielded Extruded Housing
• Isolated grounds for eliminating ground loop issues
• Includes Mounting brackets and hardware

RM-60 Features:

• 60-Watt VHF Band Mobile Radio
• 20% more power than a 50-watt radio
• 20~30 mile range
• VHF frequency
• CTCSS/DCS tone codes
• Hand mic
• Adjustable power level

For power, performance and comfort — you've come to the right place. The RM60 Kit with the RRP660 intercom and H42 Ultimate headsets packs the most features while combining the best components for the ultimate communication system.

Intercom Features:

• iPhone Connect Port (cable sold separately)
• All new transformer based platform
• 2 to 4 place with the ability to expand up to 8 places
• RF Shielded Extruded Housing
• VOX control for clear communications in loud environments
• Music In with auto-muting
• Precision tune mic gain control
• Isolated grounds for eliminating ground loop issues
• High output amplifier for outstanding music listening

RM-60 Features:

• 60-Watt VHF Band Mobile Radio
• 20% more power than a 50-watt radio
• 20~30 mile range
• VHF frequency
• CTCSS/DCS tone codes
• Hand Mic
• Adjustable power level
• ...and more

Featuring our sport & race RRP5050 intercom, this kit provides the most basic race setup for driver and co-driver that is compatible with existing off-road wired helmets. Combine the RRP5050 Race Intercom Kit with one of our car-2-carsystems, and you are ready for battle!

This 2-place intercom incorporates two 3.5-watt amplifiers allowing the driver and co-driver to have separate volume controls. A sealed 3.5mm music port on the face of the RRP5050 Intercom allows you to plug in an mp3 player or phone to enjoy music as you ride. Easily talk to other cars in your group by connecting to a 2-way handheld or mobile radio with the built in radio jumper pigtail. Off-road construction and the unique Rugged Intercom shape make this intercom easy to install using the supplied side channel L brackets or one of our optional dash and UTV specific mounting brackets.

Engineered for high-noise environments, the RRP5050 intercom is a versatile unit that is easy to install in any race truck, UTV or buggy. It's got your race features, it’s got your play features and it's ideal for any 50/50 driver. With its versatility and affordable price, you can’t go wrong using this intercom for your in-car communication needs.

Features:

• Front sealed 3.5mm music port
• Driver & Co-Driver Volume Control
• Universal 2-way radio connection
• Aluminum extrusion housing for total circuit shielding
• Adjustable depth and angle mounting
• High output amplifier for outstanding music listening
• Isolated grounds for eliminating ground loop issues
• Includes mounting brackets and hardware

Kit Includes:

• (1) RRP5050 Intercom
• (1) Driver Push-to-talk
• (1) Co-Driver Push-to-talk
• (2) 12ft. Intercom Cables

For the driver that splits seat-time between racing & playing, we've got you covered with the NEW RRP5050 Intercom. This intercom was designed for the no-frills racer who wants a reliable race intercomthat can also be used for a joy ride. With the RRP5050 intercom, you get the best of both worlds at a cost-effective price.

This 2-place intercom incorporates two 3.5-watt amplifiers allowing the driver and co-driver to have separate volume controls. A 3.5mm music port on the face of the RRP5050 Intercom allows you to plug in an mp3 player or phone to enjoy music as you ride. Easily talk to other cars in your group by connecting to a 2-way handheld or mobile radio with the built in radio jumper pigtail. Off-road construction and the unique Rugged Intercom shape make this intercom easy to install using the supplied side channel L brackets or one of our optional dash and UTV specific mounting brackets.

Engineered for high-noise environments, the RRP5050 intercom is a versatile unit that is easy to install in any race truck, UTV or buggy. It's got your race features, it’s got your play features and it's ideal for any 50/50 driver. With its versatility and affordable price, you can’t go wrong using this intercom for your in-car communication needs.

Features:

• Front 3.5mm music port
• Driver & Co-Driver Volume Control
• Universal 2-way radio connection
• Aluminum extrusion housing for total circuit shielding
• Adjustable depth and angle mounting
• High output amplifier for outstanding music listening
• Isolated grounds for eliminating ground loop issues
• Includes mounting brackets, hardware and power cable

Dimensions:

Width: 4.5" x Depth: 4.125"

Yes, a 5-watt Radio Kit is possible! Easily connect to any of our intercom kits to complete an in-car setup. This great option is perfect for those looking to communicate with friends and family on the trail within a 2-3 mile range.

Installation is a snap with the included radio-to-intercom adapter. Simply plug radio and cables into your intercom and you're good to go!

Also included in this kit, is a long-range ducky antenna for a little extra radio boost. Make this package complete with additional accessories found below.

INCLUDES:
• 5-watt RH-5R provides 2~3 mile range.
• Long range ducky antenna
• 6' Jumper Cable
• RH-5R Mounting Bracket

Whether you're chasing for a race team, or simply need reliable base camp communications, the RM-45 Radio Kit is a great choice. This kit combines the 45-watt RM-45 UHF radio with an easy to install UNI-MAG Universal Antenna Mount and coax cable for easy installation into your vehicle or at base camp.

The RM-45 UHF Radio Kit it perfect for chase trucks, motorhomes, pit areas, and base camp. It's powerful, easy to operate, and provides 45 watts of power for maximum performance and distance. In addition to range, the RM-45 offers incredible features making it the new leader in UHF radio communications.

Simple operation and an uncluttered face makes the RM-45 easy to operate. With 5 front facing buttons, the RM-45 is easy to adjust functions.

The RM-45 has more features than you'll probably ever need, but all these options are what makes the RM-45 such a strong and versatile 2-way mobile radio.

Features:

• UHF frequency
• Powerful 45 watts of power
• 20~30 mile range
• DCS/CTCSS tone code capable
• Channel scan
• Adjustable squelch
• Channel edit
• Tone code scan
• Adjustable power level
• Vehicle voltage indictor
• Time-out-timer
• Busy channel lockout
• more...

Dimensions:

• 5.5"W x 7.5"D x 1.5"T

Includes:

• UHF RM45 Radio
• Hand Mic
• U-Bracket
• 6' power cable with inline fuse
• Mounting hardware
• UNI-MAG Universal Antenna Mount
• Owners manual

This steel mounting plate adapter will allow you to fit an RM-25R Radio into an existing RM-60 Radio Mount.

Simply attach the adapter to your current RM-60 Mount with the (2) included bolts and position your RM-25R radio in its place.

The mount is powder-coated black for a visually appealing finish.

Works with

• CANAM-MT-RM60
• DM-60
• GEN-MT
• IDM-RM60
• RZR-MT-XP1-RM60
• SC-MT-RM60
• YXZ-MT-RM60

Includes mounting hardware.

This mount is NOT compatible with the RM25R-WP (Waterproof) radio.

Radio and Intercom not included.

Block Off Plate for RM-60 Mounts

This steel block off plate will allow you to cleanly cover the radio mounting hole in an existing RM-60 Radio Mount for a streamlined look.

Simply attach the block off plate to your current RM-60 Mount with the (2) included bolts and you're done. Perfect for those who run an intercom only and plan on adding a radio in the future.

The block off plate is powder-coated black for a visually appealing finish.

Works with

• CANAM-MT-RM60
• DM-60
• GEN-MT
• IDM-RM60
• RZR-MT-XP1-RM60
• SC-MT-RM60
• YXZ-MT-RM60

Includes mounting hardware.

Block Off Plate for Intercom Mounts

This steel block off plate will allow you to cover the intercom mounting hole in an existing Rugged Radios Mount for a clean and streamlined look.

Perfect for those who run a radio only and plan on adding an intercom in the future. Simply attach the block off plate to your current mount with the (2) included bolts and you're done.

The block off plate is powder-coated black for a visually appealing finish.

Works with

• CANAM-MT-RM60
• DM-60
• GEN-MT
• MT-XP1-RM60
• MT-XPS-RM25
• MT-XP1-RM25WP
• MT-XP1-VX
• SC-MT-RM60
• YXZ-MT-RM60

Includes mounting hardware.

This steel switch panel will allow you to cleanly mount up to four switches in place of a radio in an existing RM-60 Radio Mount.

Simply attach the switch panel to your current RM-60 Mount with the (2) included bolts and you're ready to install your switches. Perfect for those who run an intercom only and want to control additional accessories and lighting.

The switch panel is powder-coated black for a visually appealing finish.

Switch holes measure 20mm wide and 36mm tall.

Works with

• CANAM-MT-RM60
• DM-60
• GEN-MT
• IDM-RM60
• RZR-MT-XP1-RM60
• SC-MT-RM60
• YXZ-MT-RM60

Includes mounting hardware.

Quickly and easily dash mount your Rugged intercom with the black billet Rugged Radios face plate.

Includes mounting hardware.

Works with:

• RRP360 Intercom
• RRP362 Intercom
• RRP660 Intercom
• RRP660 Plus Intercom
• RRP686 Intercom
• RRP5050 Intercom
• RRP6100 Intercom

Also works with older models including the RRP350 and RRP357

Mounting your offroad intercom or Variable Speed Controller (VSC-2 or VSC-2-V2 only) is easy with this flush style mounting bracket.

Black anodized, stamped steel offers durable and secure mounting for a variety of dashes.

Fits:

• 360 Intercom
• 362 Intercom
• 660 Intercom
• 660 PLUS Intercom
• 686 Intercom
• 5050 Intercom
• 6100 Intercom
• Variable Speed Controller
  VSC-2
• Variable Speed Controller VSC-2-V2
• Intercom mounts to faceplate using bolts included with the intercom.

Intercom or Variable Speed Controller not included!

In-Dash Billet Mount for RM-60, RM-100 or RM-45 Mobile Radio

The anodized billet alloy bracket is lightweight, making installation clean and simple for our most popular radios.

Features:

• Black anodized finish
• Billet construction
• Mounting hardware included

Radio not included.

In-Dash Billet Mount for RM-25

Universal dash mount allows you to mount your RM-25R radio. Rugged billet construction and simple design allows for mounting in unique locations.

Features:

• Black alloy finish
• Billet construction
• Mounting hardware included

Radio Fitment:
-RM-25R Mobile Radio

In-Dash Mount for Kenwood Mobile Radio

Specifically designed for the Kenwood TK-7360 mobile radio, this 2 piece radio bracket installs into the dash of your vehicle. The main bracket attaches to the radio, while the faceplate bolts to the bracket through the dash, creating a flush and secure mounting solution.

Features:

• Black powder coated finish
• Steel construction
• Mounting hardware included

In-Dash Mount for Icom F5021 Mobile Radio

Specifically designed for the Icom F5021 mobile radio, this 2 piece radio bracket installs into the dash of your vehicle. The main bracket attaches to the radio, while the faceplate bolts to the bracket through the dash, creating a flush and secure mounting solution.

Features:

• Black powder coated finish
• Steel construction
• Mounting hardware included

Mount your RM-25R Mobile Radio and Intercom with these quick and easy side mount brackets.

Hardware Included.

Works with:

• RM-25R Mobile Radio
• 360 Intercom
• 660 Intercom
• 660 PLUS Intercom
• 686 Intercom
• 6100 Intercom

Radio and Intercom not included. L-Brackets shown are included with intercom purchase.

Easy to mount aluminum radio box holds your handheld radio securely in place. Ballistic nylon padded lining absorbs vibration and shock protecting the radio from abuse.

• Proudly made in the USA
• T6061 Alloy Construction
• Precision Tig welded
• Hard anodized finish
• Shock absorbing liner
• Universal mounting

Proudly designed and manufactured in the USA, the Rugged radio box is built to withstand tough environments

Does not include handheld radio.

Scosche Industries Adjustable Whip/Flag mount allows you to mount your whip or flag to any vehicle with 1.75" or 2" tubing.

The mount features a 1/2" hole with 360-degree adjustability and 18 adjustment positions that allows you to get your whip/flag in the perfect spot.

The mount is made from 6061-T6 aluminum with stainless steel mounting hardware and features a black UV resin finish.

To use your prefered flag in this mount, simply use any 1/2" diameter flag mount system (not included) thru the 1/2" hole and tighten down.

No welding, no drilling, no mess! Need to relocate your whip/flag? Simply unbolt the mount and move it!

- BaseClamp tube-clamps include a stainless steel tightening screw..

California Prop 65 WARNING

Chrome plated stainless steel shock spring is the perfect addition to help reduce breaking and bending of your whip antenna.

The high tension, heavy duty spring screws onto your existing threaded antenna base. Then simply slide your tuned (pre-cut) antenna into the slot and secure with the side screws.

Works for most of the following antennas:
• VHF 5/8 Wave
• VHF 1/2 Wave
• VHF 1/4 Wave HD
• CB

Not compatible with DB-RM Antenna