Talon

This tool is designed to add the ability to grease your wheel bearings WITHOUT requiring removal of the axles and or entire hub assembly.

If you have owned your Talon or other UTV you have probably learned of the importance in keeping your wheel bearings in perfect operating condition. With our tool you will relieve the strain of that time consuming task.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

This tool fits ALL Models of the Honda Talon. No exclusions.

Here is a short video on how our tool actually works.

Our shift gate is one item we created with comfort and ease of use in mind. 

The shift gate enables you to quickly and easily shift between forward and reverse gears even without looking!

With the factory shift gate it is necessary to move the shift lever over to the right then forward or backwards each time you want to shift gears. With our shift gate once you are in gear, gear change is as simple as forward and backward, saving time between gear changes and keeping your eyes on the trail, not on the shift knob.

Features include:

• Gated shift between reverse and forward
• One section for forward to reverse in low and one section for forward to reverse in high.
• Made from aircraft grade 6061 T6 Aluminum
• Powder coated or raw finishes available
• Bolts directly in, no cutting or modifications of the vehicle necessary
• New mounting hardware included

As with every product we make everything is made here in the U.S.A and comes with a full lifetime warranty.

If you are one of the more extreme riders out there, that push things to the limits and are the first to find the known failure points then you have likely experienced tie rod failure on your Honda Talon. Or perhaps you are just the type that prefers to upgrade it before it breaks. Regardless of which category you fall into we have exactly what you need.

Tie rods are machined from the exact same Billet aircraft grade hex aluminum as our radius rods, so you know for a fact they will take a beating. Our tie rods are machined to accept the factory steering rack end so nothing additional is needed to install.

Rods feature our signature ceramic based hard coat anodize for increased wear resistance, as well as the absolute best heim joints on the market the FK JMX rod ends. In steering components especially we only use the best of the best and do not give options of the KMX heims as we do with other components.

Be careful with using inferior joints in any type of critical suspension and or steering component. Not only do they wear very quickly, they are not as strong and will cause alot of annoying noise after they wear a little.

Our tie rods also feature a connection point for the knuckle side that is made from solid 4140 Chromoly and replaces the factory taper bushing. In doing so this results in a larger pin in the knuckle area and eliminating a failure and weak point.

Comes as a pair of two (2) tie rods to service the entire vehicle. This is an entire kit and nothing additional is needed to install.

These feature our FULL LIFETIME WARRANTY as well. You break or bend it we will replace it. Simple as that.

When you demand more power from your machine you need somewhere to store that power. That's exactly what our battery tray is for. 

Designed for rigidity and long lasting service it fits neatly and securely under the hood of your Talon. It also uses all existing holes in the frame so there is no need to cut or drill anything new. 

Laser cut and CNC bent from 1/8 steel this battery tray will be sure to hold up for a long time. It is designed to accommodate most all popular batteries on the market. 

Comes in black power coat and includes all hardware needed to fasten it to the frame, and a rubber strap to secure the battery.

Will fit a battery up to these dimensions  W-9 1/4'   L-6 1/4'    H-7'

As with all of our parts it is backed by a full lifetime warranty. If you break or bend it we will replace it guaranteed. 

2” 4 point harness with Auto Style Buckle is here! Super easy to deal with and no latch and link to fuss with. Featuring sewn in harness pads for ultimate comfort. Great for kids or the weekend warrior on weekend trips. All black hardware, custom Hunter Safety Products logo super easy adjustments. Get in, buckle up, and GO! These are NOT SFI Certified, not intended for racing purposes. If you need SFI rated harnesses please see our 3” harness.

Looking for a clean, convenient way to mount your Switch Pro Pod? The Geiser Performance Switch Pro Tube Mount is the way to go.

Mount fits 1.75" tubing with a the SP-9100 system.

Does NOT include Switch Pro system.

Install:
1. Mark holes on tubing
2. Drill and tap tube to a 10-32 thread
3. Install Switch Pro onto mount with supplied 4-40 hardware
4. Install Switch Pro mount with supplied hardware

Although similar in aesthetics to the Squadron® Pro, the application for the Sport varies.  The Squadron® Sport utilizes 4 LEDs producing an impressive 3,150 lumens at 26 watts making it ideal for near field, side/backup and scene lighting application. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Please note that this light does NOT include a harness and the applicable harness to this light is 640117

Includes:

• Squadron® Sport LED Light
• Mounting Bracket

 
Patterns:

Driving/Combo:  Maximum trail coverage in a single light.  The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road.  The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft.  This pattern is not suitable for driving. (Lighting Zone 7)

Our Squadron® Pro packs 4,900 Lumens at 40 watts that will truly annihilate the night. Don’t let this light fool you, although compact in size this LED auxiliary light will literally blind you with brightness. The Pro comes equipped with a sleek black gloss aluminum housing and outshines the competition through both appearance and performance. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Includes:

• Squadron® Pro LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Fuego, PreRunner, LaPaz, Squadron and SII.

It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.

Kit Includes:

• High Clearance Rods
• Billet Pull Plate
• Rear Sway Bar Links
• Tie Rods

Our sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all high quality hardware and FK brand JMX joints standard!

Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

Model X and R take different products so be sure to select the correct vehicle.

If you are tired of breaking weak factory sway bar end links or perhaps you are just looking for a nice high quality upgrade, then you have no reason to look any further, because we have you covered.

Our upgraded sway bar end links main body is machined from Billet 6061 aluminum hex bar stock. They are then machined with a taper on each end to add style, and heavy duty powder coat for a long lasting finish.

All of our links comes standard now with FK Brand JMX joints. This is an added cost but is drastically increases the life and wear of the links.

Link kits consist of two links for the rear of the vehicle. Kits also include new bolts, nuts, and washers for a complete and seamless installation.

As with all of our products we strive for the absolute highest quality. So with that being said we offer our links with a FULL LIFETIME WARRANTY from workmanship and defects. If for any reason at all your part should fail, we will gladly either replace or repair whichever YOU prefer.

We have taken a lot of extra time and effort to make sure all parts not produced directly by us are made right here in the USA, this is something we take very seriously.

Sold as a pair (2) to service one (1) vehicle

Give us a try, we promise not to disappoint.

The Honda Talon comes inadequately equipped with a strong or easy to use tow point. Well, we have the fix for you!

If you are looking for the strongest pull plate on the market for the most affordable price, look no further, because you have arrived at your destination.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 Aluminum bar stock and precision machined with fitment, function, and value in mind!

We have taken bumper fitment into consideration and made this plate fit a vehicle with a factory bumper installed.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the southeast U.S.

This part includes our standard industry leading lifetime warranty. Simply put you break it we replace it. Simple as that.

If you've made it this far into our website, you are likely here for one reason. You are in search of a quality product at a quality price, and receive red carpet customer service.

Well, we are here to let you know go ahead and click the check out button below!

But, if you want to know more details.... then if you insist we can go over those as well.

Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market.

Our rods also boast a full 3 INCHES OF ADDED GROUND CLEARANCE!! So take the washed out trail with confidence in mind.

We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability on the high clearance lower rods and use FK brand JMX heims on the upper. There is no better joint to use on the planet.

Our rods are fully covered by a no hassle no BS warranty. If you damage a rod in any way we guarantee to replace it no questions asked, at all. We stand behind everything we produce and leave no doubt at our level of customer satisfaction.

 Set includes 4 rods total. 

2 Billet High Clearance

2 Billet Straight

All heims and needed hardware included. 

Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut to reach all four corners of your small to mid-sized vehicle with some wiggle room on each lead to route the wiring any desired way. This kit includes four 400 lumen rock lights and wiring for a truly turn key kit.

These LED lights are waterproof and can be mounted virtually anywhere. All that is needed is 12 volt power. They have a 180 degree optic to illuminate your wheel wells or anywhere else you need a bright and smooth light.

Caution: Rock Light can get very hot when used for long periods of time. Please use caution when handling or installing.

Available Colors:

• Amber
• Blue
• Green
• Red
• White

Included With Kit:

• Wiring Harness
• x4 Rock Lights

NOTE: These lights will only work with a 12 volt charging system.

Our 2” harnesses are the absolute safest belts for your UTV, SXS, or any vehicle. With sewn in shoulder pads the comfort is always there. Great for kids or trail riding! For serious riding see our 3” 5 Point Harnesses. Can be used without the crotch strap if preferred.

Although compact at 3” by 3”, don’t be fooled by its size, the Squadron Pro IR 850nm LED light is more powerful than most larger lights on the market today. This light is perfect for covert applications such as military, and hunting.

950 nm Specifications:
LED: 4 Osram 940nm LEDs
mW: 3960mW
mW/sr: 1700mW/sr
Weight: 12 ounces
Wattage/Amps/Volts: 11W, .80A at 13.80Vdc, .40A at 27.6Vdc
Dimensions: 3.07” x 2.76” x 3.07”
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Built-In Overvoltage Protection
Exceeds MIL-STD810G (Mil-Spec Testing)
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Includes:

• Squadron Pro, IR LED Light
• Mounting Bracket

UTV RTL CanAm Maverick X3, Polaris RZR 1000 Wiring Harness

This harness was designed for someone looking for a harness that is long enough to reach the mounting location of your RTL on your two or four seat Can-Am or RZR. The harness comes equipped with high quality sheathing and a relay to power all the functions; running light, brake, and cargo/reverse light. If you have purchased an RTL-S please purchase harness 64-0111 which will include a rectangular rocker switch to plug into your factory dash.

UTV RTL-S Turn Signal Harness

The harness comes complete with a red backlit rocker switch which flashes to indicate the direction you are turning. This switch is designed to install directly into your factory dash location. There is also another switch which gives you a dust light option illuminating amber lights simultaneously. This harness must be used in combination with the 64-0116.

The S2 Sport features the same quality, fit, and finish that is synonymous with the Baja Designs name, at an attractive price point. The S2 Sport is ideal as a fog, cornering, rack, or reverse light and much more. A compact and powerful light, featuring quality that is second to none.

Includes:

• S2 Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Take your UTV side by side to the next level with our Baja Designs UTV vehicle specific mounting kits. This kit comes equipped with a pair of Squadron Pro LED lights that will truly light up the night at 9,800 lumens at 80 watts. Whether you’re looking for more trail coverage or just need more light for outdoor working conditions, these Squadron Pro LED lights have you covered.

Includes:

• (2) Squadron® Pro LED Lights
• Mounts Specified to Selection
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (10°) and Spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

The XL Sport makes it easy to light up your world in style, with the perfect combination of affordability and performance. The XL Sport LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern. The XL Sport provides the same top of the line performance and aesthetics you expect from BD in an affordable solution. All Baja Designs LEDs are backed by a 30 Day Satisfaction Guarantee & Limited Lifetime Warranty for the ultimate in purchase protection.

Note: A Skene dimmer must be purchased separately to enable the high/low feature.

Includes:

• XL Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

With a higher lumen count and lower power draw of 40 watts, the XL-R series is the only single housing LED auxiliary light on the market that has the distance of an 8” HID with the smooth spread of an LED. The XL Pro LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern, and offers a 50% dimming feature. Perfect for enthusiasts that need a vast amount of light and are looking for something other than a light bar. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Squadron Racer Racer Edition
Baja Designs is proud to introduce the Squadron Racer Edition, with 4,300 lumens. The Squadron Racer Edition throws light an average of 40% further than the Squadron Pro with High-intensity LED, housed in hard anodized and powder coat cast aluminum. Enjoy nearly 50,000 hours of bright, efficient lighting to enhance your nighttime off-roading experiences! As always, Baja Designs provides the best in auxiliary LED lights with a 30 Day Satisfaction Guarantee, and Limited Lifetime Warranty.

Includes:
· Squadron Racer Edition LED Light
· Mounting Bracket


Patterns:

Spot: A longer and narrower 7° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights.

Squadron-R Pro

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,328 lumens of pure power, low amp draw of 4.06 amps, and nearly 50,000 hours of LED life. The S8 also features upgraded reflectors, an amber backlit feature, and new scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection!

Includes:
· S8 10” LED Light Bar
· Mounting Brackets

Please note that this light does NOT include a harness and the applicable harness to this light is 640115

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Complete harness for Baja Designs XL (Pro & Sport) LED Light.

This harness takes all the guess work out of installation and is incredibly high quality suited for race use!

This harness allows you to use the high beam or toggle switch to turn on the LED light.

Features:

• Includes Toggle switch for On/Off and Momentary button for dim mode.
• Heavy duty wire gauge.
• Complete with battery ring terminals, relay, sheathing, fuse.
• 100" wire length between battery ring terminals and weatherpack for bumper or roof mounting.

Includes:

• (1) XL (Pro & Sport) Wire Harness w/Mode-2 lights max 325 watts (64-0119)
• (1) OnX6/XL (Pro & Sport) Wiring Harness Splitter - adds 1 light (61-3608)