Interior Accessories

Our shift gate is one item we created with comfort and ease of use in mind. 

The shift gate enables you to quickly and easily shift between forward and reverse gears even without looking!

With the factory shift gate it is necessary to move the shift lever over to the right then forward or backwards each time you want to shift gears. With our shift gate once you are in gear, gear change is as simple as forward and backward, saving time between gear changes and keeping your eyes on the trail, not on the shift knob.

Features include:

• Gated shift between reverse and forward
• One section for forward to reverse in low and one section for forward to reverse in high.
• Made from aircraft grade 6061 T6 Aluminum
• Powder coated or raw finishes available
• Bolts directly in, no cutting or modifications of the vehicle necessary
• New mounting hardware included

As with every product we make everything is made here in the U.S.A and comes with a full lifetime warranty.

Now introducing the WSRD & Dezert Freak DynoJet Power Vision PV3 Mounting Arm. For a couple months now, as we have been introducing and selling more and more PV3s, we haven't had a mounting solution like we had for the Power Vision CX units. 

NOW WE DO! 

This is currently a limited quantity item will we finish our production runs for inventory. Any orders that aren't fulfilled early next week will be fulfilled once inventory is replenished. 

When you demand more power from your machine you need somewhere to store that power. That's exactly what our battery tray is for. 

Designed for rigidity and long lasting service it fits neatly and securely under the hood of your Talon. It also uses all existing holes in the frame so there is no need to cut or drill anything new. 

Laser cut and CNC bent from 1/8 steel this battery tray will be sure to hold up for a long time. It is designed to accommodate most all popular batteries on the market. 

Comes in black power coat and includes all hardware needed to fasten it to the frame, and a rubber strap to secure the battery.

Will fit a battery up to these dimensions  W-9 1/4'   L-6 1/4'    H-7'

As with all of our parts it is backed by a full lifetime warranty. If you break or bend it we will replace it guaranteed. 

2” 4 point harness with Auto Style Buckle is here! Super easy to deal with and no latch and link to fuss with. Featuring sewn in harness pads for ultimate comfort. Great for kids or the weekend warrior on weekend trips. All black hardware, custom Hunter Safety Products logo super easy adjustments. Get in, buckle up, and GO! These are NOT SFI Certified, not intended for racing purposes. If you need SFI rated harnesses please see our 3” harness.

This handle replaces the OEM grab handle with a billet 6061 CNC-machined Geiser grab handle. All needed hardware included. Available for individual purchase or as a set with Shift Knob and Shift Gate.

Looking for a clean, convenient way to mount your Switch Pro Pod? The Geiser Performance Switch Pro Tube Mount is the way to go.

Mount fits 1.75" tubing with a the SP-9100 system.

Does NOT include Switch Pro system.

Install:
1. Mark holes on tubing
2. Drill and tap tube to a 10-32 thread
3. Install Switch Pro onto mount with supplied 4-40 hardware
4. Install Switch Pro mount with supplied hardware

Our RZR bracket centers up the radio and intercom under the center of the dash on the two dash support rails with no drilling necessary. The bracket is Powder Coated in Satin Black and comes complete with hardware.

This bracket is for use only with the Icom F5021 Two-way radio and 4 Link Pro / 4 Link Pro Elite and Com X Race intercom. It will not work with the Kenwood, Vertex, or other brand radios.

• Compatible with Polaris RZR models with no center storage box.

• Retains factory storage box
• Compatible only with Polaris RZR models with a pull open storage box. If you have the twist lock storage box, you will need this bracket here. 

Our RZR bracket centers up the radio and intercom right under the dash replacing the pull open stock storage box. If you have the twist lock storage box, check out this bracket here. The bracket is designed for plenty of knee room and installation is a breeze with only two new holes that must be drilled.

The bracket is Powder Coated in Satin Black and comes complete with hardware. This bracket is for use only with the Icom F5021 Two-way radio or Kenwood TK-7360 and 4 Link Pro, 4 Link Pro Elite, Trax and Com X Race intercom.

These brackets will not work with Vertex, or other brand radios.

Compatibility - Fits in RZR models with a "Pull" open center storage box. If you have the twist lock storage box, check out this bracket here.

Our bracket centers up the radio and intercom right under the dash replacing the stock twist open storage box. The bracket is designed for plenty of knee room and installation is a breeze with only two new holes that must be drilled.

The bracket is Powder Coated in Satin Black and comes complete with hardware. This bracket is for use only with the Icom F5021 or Kenwood TK-7360 Two-way radio and 4 Link Pro, 4 Link Pro Elite, Trax and Com X Race intercom. It will not work with the Vertex, or other brand radios.

Compatible with Polaris RZR models with a twist lock open storage box. If your storage box is a pull open, use this bracket.

Complete in car communications with headsets. Check out our mounting solutions to simplify install in most UTV's!

What Comes in the box:

• 4 Link Pro Elite Intercom. Two 12' and Two 16' Headset/Helmet Cables with quick disconnect nexus mil spec connections. Upgrade to Bluetooth or DSP! (See Below)
• Headsets. Four High Quality, Carbon Fiber, Over the Head style Headsets with built in coil cord.
• Music/Phone Audio Input Cable. Included on standard and DSP models. Sold separately for Bluetooth models. 6' cable allowing you to input music into your intercom or voice conversation from a phone or music device.

Our 4 Link Pro Elite Intercom comes standard with great features like digitally controlled squelch, noise cancellation and automatically muting music when you speak into the mircrophones. Upgrade your intercom to PCI Exclusive Bluetooth and/or DSP Technology.

• DSP - "Digital Signal Processing" electronically removes all noise from the intercom system except your voice. This is a MUST have for vehicles without a windshield, headsets, V8 cars, or loud exhaust. Simple, one touch operation on the face of the intercom allows you to turn on DSP when you need it, and turn it off when you don't.
• Bluetooth - Pair your Cell phone or Bluetooth capable music device player for wireless music and phone calls.  Listen to your music without connecting any wires or have a cell phone conversation without ever connecting your phone to your intercom system. Great for hands free driving! Simple, one touch operation on the face of the intercom allows you to play or pause while music is playing, or answer incoming phone calls!

The Supreme Package comes standard with our Over The Head style headsets. They feature full range, high fidelity speakers. Upgrade Options:

• Behind the Head - Includes Gel Ear Seals, Cloth Ear Covers and a foam mic sock. The rigid bar is across the back of the head. We often recommend BTH for high speed boats as the soft velcro top strap is more aerodynamic.

Complete in car communications with headsets. Check out our mounting solutions to simplify install in most UTV's!

What Comes in the box:

• 4 Link Pro Elite Intercom. Two 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. Upgrade to Bluetooth or DSP! (See Below)
• Headsets. Two High Quality, Carbon Fiber, Over the Head style Headsets with built in coil cord.
• Music/Phone Audio Input Cable. Included on standard and DSP models. Sold separately for Bluetooth models. 6' cable allowing you to input music into your intercom or voice conversation from a phone or music device.

Our 4 Link Pro Elite Intercom comes standard with great features like digitally controlled squelch, noise cancellation and automatically muting music when you speak into the mircrophones. Upgrade your intercom to PCI Exclusive Bluetooth and/or DSP Technology.

• DSP - "Digital Signal Processing" electronically removes all noise from the intercom system except your voice. This is a MUST have for vehicles without a windshield, headsets, V8 cars, or loud exhaust. Simple, one touch operation on the face of the intercom allows you to turn on DSP when you need it, and turn it off when you don't.
• Bluetooth - Pair your Cell phone or Bluetooth capable music device player for wireless music and phone calls.  Listen to your music without connecting any wires or have a cell phone conversation without ever connecting your phone to your intercom system. Great for hands free driving! Simple, one touch operation on the face of the intercom allows you to play or pause while music is playing, or answer incoming phone calls!

The Supreme Package comes standard with our Over The Head style headsets. They feature full range, high fidelity speakers. Upgrade Options:

• Behind the Head - Includes Gel Ear Seals, Cloth Ear Covers and a foam mic sock. The rigid bar is across the back of the head. We often recommend BTH for high speed boats as the soft velcro top strap is more aerodynamic.

Our favorite X3 bracket for ease of install while keeping the knobs easily accessible. This bracket replaces the pillars in the X3 and relocates the Start/Stop button.

• Available for Kenwood and Icom Radios
• All Hardware Included
• Some Cutting Required
• Compatible with X3's 2017-2021

Option to add clean looking side panels. 

Before you purchase or install an Icom Radio into your Can Am - PCI strongly recommends upgrading to the Kenwood TK-7360 Mobile Radio. With exceptional RF noise filtering, the Kenwood is a must for UTV's with dual stators like the CanAm and RZR Turbo S. The Kenwood also requires less power to transmit at full strength, ideal for vehicles with smaller batteries or vehicles with a lot of aftermarket accessories. 

Complete in car and two-way radio communications without the headsets. Everything you need to install in your vehicle. Add on Trax Stereo headsets, Trax Stereo pre-wired helmets or Trax Stereo helmet wiring kits to complete the system. Check out our mounting solutions to simplify install in most UTVs!

Please note your existing 4 conductor headsets and helmets will not connect to the 5 conductor Trax Stereo Cables. You can purchase an adapter, but your mono headset or helmet will still be mono with the adapter. For the complete Trax stereo experience, purchase a Trax Stereo headset, Trax Stereo pre-wired helmet or Trax Stereo helmet wiring kit.

What comes in the box:

• TRAX Plus Stereo Bluetooth Intercom. Two 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.

• TRAX Plus Stereo Bluetooth Intercom. Two Trax 5 pin 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• TRAX Stereo Helmet Wiring Kits. Featuring new Full Range HFI Speakers and Trax Stereo 5 pin Water resistant H2no plug. Easy to install in your own helmet or send to us for professional install.
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.

• TRAX Plus Stereo Bluetooth Intercom. Two Trax 5 pin 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• TRAX Stereo Headsets. Full Stereo, High Quality, Carbon Fiber, Over the Head style Headsets with built in coil cord. Featuring new Full Range, HFI Speakers, Gel Ear Seals and Cloth ear covers.
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.

Complete Stereo in car communications with Trax Plus Stereo helmet wiring kits. Check out our mounting solutions to simplify installation in most UTVs!

What comes in the box:

• TRAX Plus Stereo Bluetooth Intercom. Two Trax 5 pin 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• TRAX Stereo Helmet Wiring Kits. Featuring new Full Range HFI Speakers and Trax Stereo 5 pin Water resistant H2no plug. Easy to install in your own helmet or send to us for professional install..

• 4 Link Pro Elite Intercom. Two 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 Seat packages add two 16' cables for the rear seats. Upgrade to Bluetooth or DSP! (See Upgrade tab)
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
  
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.
• Helmet Wiring Kits. Two sets of high Quality, race proven speakers and microphone. Easy to install in your own helmet or send to us for professional install.
• Music/Phone Audio Input Cable. Included on standard and DSP models. Sold separately for Bluetooth models. 6' cable allowing you to input music into your intercom or voice conversation from a phone or music device.

Don't risk wear and tear to your headsets by having them on your seats or on the floor of your vehicle. Mount this bracket and keep your headsets in great condition with this headset hanger!

Available in 1.5", 1.75", 1.85" and 2"

Now introducing the WSRD & Dezert Freak DynoJet Power Vision PV3 Mounting Arm for the 2020 Can-Am X3 Models. For a couple months now, as we haven't had a mounting solution for the newest X3 models...

NOW WE DO! 

This is currently a limited quantity item will we finish our production runs for inventory. The limited quantity that is available is in stock and ready to ship. 

Introducing the complete Emtron Plug and Play Can-Am Engine Management Package! As we continue to personally develop the Emtron ECU, we have the ability to expand the products we offer to our clients, racers and dealers. More product pictures, installations, and results coming soon! This is the ultimate tuning experience for each end user; from data monitoring to full adjustability on the keypad. 

What's Included? 

• Emtron X3 Plug and Play ECU
• Emtron Lambda Controller
• Includes WSRD Oxygen Sensor
• Emtron Display (Options Available)
• ED5 5" Display
• ED7 7" Display
• 52mm CAN Gauge
• Emtron 8 Button Keypad

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

The Geiser Performance Shift Knob was designed with functionality and style in mind. This knob replaces the OEM shift knob with a billet 6061 CNC-machined knob. With an easy, 2-minute install this upgrade is worth it.

• Fits all Can-Am Maverick X3 models

The Geiser Performance ECU & Battery Covers protect the open ECU and battery compartments from dirt and debris.

Fit all Maverick X3 models. Hardware provided.

Our 2” harnesses are the absolute safest belts for your UTV, SXS, or any vehicle. With sewn in shoulder pads the comfort is always there. Great for kids or trail riding! For serious riding see our 3” 5 Point Harnesses. Can be used without the crotch strap if preferred.

Replaces the OEM set up with a custom 5052 aluminum shift plate. Available in raw or black powder coat finish.

Please allow 2-5 days after purchase for order to be ready.

Install video: https://youtu.be/SjB9bH9fK30. Some trimming of OEM plastic shift gate required for install.

Geiser Performance has teamed up with Rugged Radios to create a custom Air Pumper Mount for your Can-Am Maverick X3. This product, made of 5052 aluminum, is the ideal option for mounting the Rugged M3 Air Pumper to your X3. Mounts easiest on the back of the cab between the seats.

Works perfect with the Rugged Radios M3 Air Pumper.