WSRD E85 Ethanol Tester
Regular price $13.00 Save $-13.00FK COM10T Bearing with PTFE Liner
Regular price $14.95 Save $-14.95FK COM/COMH series spherical bearings are part of their commercial series. Precision-made from quality materials, these bearings are tough and reliable to handle your stressed applications.
COM/COMH Series offers:
* 52100 heat-treated steel with hard chrome plate ball
* Low-carbon steel and oil coated race
* PTFE Liners Standard
Receiver Race Diameter (in.): 1.1875 in.
Race Width (in.): 0.500 in.
Inner Ball Width (in.): 0.625 in.
Inner Ball Diameter (in.): 0.6250 in.
Rod End Ball Diameter (in.): 0.968 in.
Chamfer Reference: 0.032 in.
Rod End Misalign Angle (degrees): 8.5 degrees
ULT. Static Radial Load (lbs.): 21,280 lbs.
Rod End Bearing Material: Steel
Quantity: Sold individually.
Notes: Bearing has a PTFE liner.
RPM 5" Hole Saw Bit
Regular price $11.95 Save $-11.95Make clean, professional, and accurate cuts through body panels, interior plastics, and firewalls with the RPM SXS 5" Heavy-Duty Hole Saw Bit Kit! Purpose-selected and sized specifically for the installation of the RPM Can-Am Maverick R Carbon Fiber High-Flow Intake System, this industrial-grade hole saw cuts the exact 5-inch (127mm) clearance diameter needed to route massive, oversized intake plumbing through factory plastics with zero binding, wandering cuts, or panel cracking.
Constructed with hardened, precision-ground high-carbon steel cutting teeth, this hole saw delivers clean, consistent cutting through automotive plastics, HDPE, polycarbonate, fiberglass, composites, drywall, and wood. The reinforced steel cup maintains rigidity throughout the cut to prevent binding or ovaling at high drill RPMs, while dual side-ejection slots allow for fast plug removal and heat dissipation during repeated drilling.
The kit arrives fully assembled and ready for duty right out of the box, featuring a heavy-duty threaded drive arbor with an integrated center-locating pilot bit and a matching hex key for fast pilot adjustments.
Cutting Diameter: 5.0 Inches / 127mm
Cutting Depth: 1.25 Inches / 32mm
Tooth Construction: Hardened, High-Carbon Steel Sharp-Tooth Geometry
Arbor Interface: Heavy-Duty Threaded Drive Mandrel with Replaceable Pilot Drill Bit
Material Compatibility: Automotive Plastics, ABS, HDPE, Polycarbonate, Fiberglass, Composites, Drywall, and Wood
Primary Purpose: Sized specifically for installing the RPM Can-Am Maverick R Carbon Fiber Intake Kit
Precision-Sized for Maverick R Intakes: Cuts the exact 5.0" (127mm) pass-through diameter required for the oversized filter flange and piping on the RPM Maverick R Carbon Fiber Intake.
Sharp, Aggressive Cutting Teeth: Ground teeth slice cleanly through dense UTV plastics and composite materials without chewing, tearing, or friction-melting the cut edges.
Rigid Anti-Flex Steel Cup: Heavy-gauge steel cylinder eliminates deflection and chatter, ensuring a perfectly round, finished cut every time.
Complete Arbor Assembly Included: Features a heavy-duty mandrel with a center pilot drill bit that fits all standard 3/8-inch and 1/2-inch keyed or keyless drill chucks.
Slug Ejection & Cooling Slots: Integrated side ports provide fast, simple removal of cut plastic plugs and allow airflow to prevent thermal buildup.
Versatile Shop Utility: Essential cutting tool for intake tubes, intercooler ducting, oversized wiring grommets, and custom side-by-side fabrication work.
(1) RPM SXS 5.0" (127mm) Heavy-Duty Hole Saw Cup
(1) Threaded Drive Arbor with Integrated Center Pilot Drill Bit
(1) Hex Key Wrench for Pilot Bit Adjustment & Replacement
RPM Intake Systems: Direct installation requirement for the RPM SXS Can-Am Maverick R Carbon Fiber High-Flow Intake Kit
Custom UTV Fabrication: Sized for custom 5-inch intake piping, radiator and intercooler ducting, cage pass-throughs, and electrical bulkheads across Can-Am, Polaris, CFMoto, Segway, and custom race builds
Tool Compatibility: Works in all standard 3/8-inch and 1/2-inch drill chuck
This part is compatible with 10 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2027 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2027 | Can-Am | Maverick R | Turbo (2 Seat) XRC |
| 2027 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
| 2026 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2026 | Can-Am | Maverick R | Turbo (2 Seat) XRC |
| 2026 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
| 2025 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2025 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
| 2024 | Can-Am | Maverick R | Turbo (2 Seat) |
| 2024 | Can-Am | Maverick R MAX | Turbo MAX (4-Seat) |
RPM 4.25" Hole Saw Bit
Regular price $11.95 Save $-11.95Make clean, professional, and precise cuts through body plastics, firewall panels, and interior ducting with the RPM SXS 4.25" Heavy-Duty Hole Saw Bit Kit! Specifically selected and packaged to ensure a hassle-free installation of RPM Can-Am Maverick X3 Carbon Fiber Intake Systems, this industrial-grade hole saw cuts the exact diameter required to pass oversized high-flow intake plumbing through factory plastics without ragged edges, wandering cuts, or panel cracking.
Featuring hardened, precision-ground high-carbon steel cutting teeth, this hole saw delivers aggressive, uniform cutting performance through automotive-grade plastics, HDPE, fiberglass, polycarbonate, drywall, and wood. Its rigid steel cup design prevents flexing during high-RPM drilling, while built-in side-ejection slots allow fast slug removal so you can complete your installation cleanly and quickly.
The kit comes completely ready to use out of the box, including a heavy-duty threaded arbor with a center-locating pilot drill bit and a matching hex key for quick pilot bit adjustments or replacement.
Cutting Diameter: 4.25 Inches / 108mm
Cutting Depth: 1.25 Inches / 32mm
Tooth Construction: Hardened, High-Carbon Steel Sharp-Tooth Geometry
Arbor Interface: Heavy-Duty Threaded Drive Mandrel with Replaceable Pilot Drill Bit
Material Compatibility: Automotive Plastics, ABS, HDPE, Polycarbonate, Fiberglass, Composites, Drywall, and Wood
Primary Purpose: Sized specifically for installing the RPM Can-Am Maverick X3 Carbon Fiber Intake Kit
Precision-Sized for Maverick X3 Intakes: Cuts the exact 4.25" (108mm) clearance hole required for clean, bind-free pass-through of oversized RPM carbon fiber intake tubes.
Aggressive, Razor-Sharp Teeth: Ground teeth slice cleanly through tough UTV plastics and composite materials without gumming, tearing, or melting the edges.
Rigid Anti-Flex Steel Cup: Heavy-gauge steel wall design keeps the cut circular and stable, preventing chatter marks and accidental panel damage.
Complete Arbor Assembly Included: Comes fully equipped with a sturdy drive shank and center pilot bit that fits standard 3/8" and 1/2" chuck drills.
Chip & Slug Clearance Slots: Large cutouts on the side of the barrel allow for instant plug ejection and heat dissipation during repeated drilling.
Multi-Purpose Garage Utility: An essential tool for intake ducting, auxiliary gauge pods, wiring grommet holes, and general fabrication projects.
(1) RPM SXS 4.25" (108mm) Heavy-Duty Hole Saw Cup
(1) Threaded Drive Arbor with Integrated Center Pilot Drill Bit
(1) Hex Key Wrench for Pilot Bit Adjustment & Replacement
RPM Intake Systems: Direct tool requirement for installing the RPM SXS Can-Am Maverick X3 Carbon Fiber Intake Kit
Custom UTV Fabrication: Sized for custom intake ducting, radiator hose pass-throughs, cage ducting, and electrical bulkheads across Can-Am, Polaris, CFMoto, Segway, and custom off-road builds
Tool Compatibility: Works in all standard 3/8-inch and 1/2-inch keyed or keyless drill chucks
This part is compatible with 46 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2027 | Can-Am | Maverick X3 | Base 135 HP 2 Seat |
| 2027 | Can-Am | Maverick X3 | Base 135 HP 4 Seat |
| 2027 | Can-Am | Maverick X3 | Turbo RR 200 HP 2 Seat |
| 2027 | Can-Am | Maverick X3 | Turbo RR 200 HP 4 Seat |
| 2026 | Can-Am | Maverick X3 | Base 135 HP 2 Seat |
| 2026 | Can-Am | Maverick X3 | Base 135 HP 4 Seat |
| 2026 | Can-Am | Maverick X3 | Turbo RR 200 HP 2 Seat |
| 2026 | Can-Am | Maverick X3 | Turbo RR 200 HP 4 Seat |
| 2025 | Can-Am | Maverick X3 | Base 135 HP 2 Seat |
| 2025 | Can-Am | Maverick X3 | Base 135 HP 4 Seat |
| 2025 | Can-Am | Maverick X3 | Turbo RR 200 HP 2 Seat |
| 2025 | Can-Am | Maverick X3 | Turbo RR 200 HP 4 Seat |
| 2024 | Can-Am | Maverick X3 | Base 135 HP 2 Seat |
| 2024 | Can-Am | Maverick X3 | Base 135 HP 4 Seat |
| 2024 | Can-Am | Maverick X3 | Turbo RR 200 HP 2 Seat |
| 2024 | Can-Am | Maverick X3 | Turbo RR 200 HP 4 Seat |
| 2023 | Can-Am | Maverick X3 | Base 135 HP 2 Seat |
| 2023 | Can-Am | Maverick X3 | Base 135 HP 4 Seat |
| 2023 | Can-Am | Maverick X3 | Turbo RR 200 HP 2 Seat |
| 2023 | Can-Am | Maverick X3 | Turbo RR 200 HP 4 Seat |
| 2022 | Can-Am | Maverick X3 | Base 120 HP 2 Seat |
| 2022 | Can-Am | Maverick X3 | Base 120 HP 4 Seat |
| 2022 | Can-Am | Maverick X3 | Turbo RR 200 HP 2 Seat |
| 2022 | Can-Am | Maverick X3 | Turbo RR 200 HP 4 Seat |
| 2021 | Can-Am | Maverick X3 | Base 120 HP 2 Seat |
| 2021 | Can-Am | Maverick X3 | Base 120 HP 4 Seat |
| 2021 | Can-Am | Maverick X3 | Turbo R 172 HP 2 Seat |
| 2021 | Can-Am | Maverick X3 | Turbo R 172 HP 4 Seat |
| 2021 | Can-Am | Maverick X3 | Turbo RR 195 HP 2 Seat |
| 2021 | Can-Am | Maverick X3 | Turbo RR 195 HP 4 Seat |
| 2020 | Can-Am | Maverick X3 | Base 120 HP 2 Seat |
| 2020 | Can-Am | Maverick X3 | Base 120 HP 4 Seat |
| 2020 | Can-Am | Maverick X3 | Turbo R 172 HP 2 Seat |
| 2020 | Can-Am | Maverick X3 | Turbo R 172 HP 4 Seat |
| 2020 | Can-Am | Maverick X3 | Turbo RR 195 HP 2 Seat |
| 2020 | Can-Am | Maverick X3 | Turbo RR 195 HP 4 Seat |
| 2019 | Can-Am | Maverick X3 | Base 120 HP 2 Seat |
| 2019 | Can-Am | Maverick X3 | Base 120 HP 4 Seat |
| 2019 | Can-Am | Maverick X3 | Turbo R 172 HP 2 Seat |
| 2019 | Can-Am | Maverick X3 | Turbo R 172 HP 4 Seat |
| 2018 | Can-Am | Maverick X3 | Base 120 HP 2 Seat |
| 2018 | Can-Am | Maverick X3 | Base 120 HP 4 Seat |
| 2018 | Can-Am | Maverick X3 | Turbo R 172 HP 2 Seat |
| 2018 | Can-Am | Maverick X3 | Turbo R 172 HP 4 Seat |
| 2017 | Can-Am | Maverick X3 | Turbo R 154 HP 2 Seat |
| 2017 | Can-Am | Maverick X3 | Turbo R 154 HP 4 Seat |
RPM Ear Clamp Tool
Regular price $14.95 Save $-14.95Ensure leak-proof, uniform crimps on CV boots, coolant hoses, and fuel circuits with the RPM SXS Heavy-Duty Ear Clamp Tool! Purpose-built for the fast, simple, and reliable installation of single-ear and double-ear pinch clamps (Oetiker system, stepless ear clamps, and similar styles), this professional pincer tool eliminates the uneven crimps, pinched boots, and loose connections caused by ordinary pliers or side-cutters.
Working on modern powersports machines often involves navigating tight, obstructed spaces—such as deep inside suspension hubs, around steering racks, or behind turbo charge pipes. Engineered with a low-profile, ultra-slim head design, this tool reaches into confined spaces where bulky crimpers cannot fit. Its precision-ground, blunt-face jaws apply balanced, inward-facing leverage to cleanly crush clamp ears without nicking, cutting, or weakening the clamp band or underlying rubber.
Manufactured from forged, heat-treated alloy steel, the tool provides high mechanical leverage to compress stiff stainless steel clamps with minimal hand fatigue. The durable, non-slip dipped handles ensure positive grip and control, even when dealing with greasy CV grease or slippery fluids.
Primary Function: Professional crimping and secure closure of single-ear (1-ear) and dual-ear (2-ear) pinch clamps
System Compatibility: Compatible with genuine Oetiker®, stepless, and universal ear-style clamps
Head Architecture: Ultra-Slim, low-profile jaw profile for tight clearance zones
Construction: Heavy-Duty Drop-Forged, Heat-Treated Alloy Steel
Jaw Design: Precision-ground blunt clamping edges (crimps cleanly without cutting the band)
Grip Type: Ergonomic, high-friction dipped comfort handles
Factory-Grade Crimps: Delivers consistent, uniform clamp closure to ensure high-pressure, 360-degree seals on CV axle boots, fuel injection lines, and cooling circuits.
Confined-Space Access: Slim-profile head easily slips into cramped wheel wells, tight chassis bulkheads, and compact engine bays.
Prevents Clamp Damage: Engineered jaw faces compress the clamp ear flat without gouging the metal band or cutting into soft silicone or rubber hoses.
High Mechanical Advantage: Compound leverage reduces the manual hand pressure required to seat heavy-gauge stainless steel clamps.
Essential Off-Road Shop Tool: Indispensable for CV axle rebuilds, boot replacements, fuel pump swaps, and high-pressure fluid line repairs.
(1) RPM SXS Heavy-Duty Ear Clamp Pincer Tool
Universal tool compatibility across all powersports platforms, automotive applications, and shop environments using ear/pinch clamp systems:
UTVs & Side-by-Sides: Can-Am (Maverick R, Maverick X3, Defender), Polaris (RZR Pro R, Turbo R, Pro XP, Ranger), CFMoto, Segway, and Kawasaki CV boots, coolant plumbing, and fuel systems
ATVs & Dirt Bikes: Axle boots, radiator bypass hoses, and high-pressure fuel lines
Snowmobiles: Ski-Doo, Polaris, Arctic Cat, and Lynx cooling lines, oil injection lines, and intake clamps
Automotive & Marine: Steering rack gaiters, CV joints, inboard/outboard fuel line assemblies, and PEX plumbing fittings
RPM German Style Clamps
Regular price $3.95 Save $-3.95Maintain airtight boost seals and eliminate slipped silicone couplers with genuine RPM SXS Heavy-Duty 304 Stainless Steel Replacement Clamps! Whether you are servicing a Can-Am Maverick X3 intake tract, building custom boost plumbing, or securing heavy-duty silicone hoses on high-performance turbo snowmobiles, having the correct clamp is critical. Cheap hardware-store clamps strip out, rust, and cut through silicone plies under high boost and intense chassis vibration.
Constructed entirely from premium 304 stainless steel—including the band, housing, and drive screw—these clamps deliver superior corrosion resistance against snow, ice melt, mud, sand, and aggressive pressure washing. Engineered with a smooth inner band profile, they distribute radial clamping force evenly around the hose without chewing into or extruding soft silicone.
Commonly trusted as the go-to clamp for the notorious Can-Am Maverick X3 throttle body connection as well as our full lineup of RPM turbo snowmobile silicone intake and charge components, these clamps ensure leak-free performance in sub-zero powder or desert heat. For fast, hassle-free ordering and trailside servicing, every clamp is clearly labeled with its operating size directly on the side of the band.
Material & Construction: 100% Marine-Grade 304 Stainless Steel (Band, Housing, and Drive Screw)
Band Architecture: High-torque worm drive with smooth inner surface to protect multi-ply silicone from extrusion and tearing
Size Identification: Clearly stamped/labeled metric size range on the side of each clamp for fast reference
Primary Applications: Can-Am Maverick X3 throttle body connection, turbo snowmobile silicone boost and intake lines, and custom powersports plumbing
Environmental Resistance: Fully impervious to rust, road salt, snow roost, and severe engine-bay thermal cycling
Select your needed diameter range from the drop-down menu:
40–60mm
50–70mm
60–80mm
70–90mm
90–110mm
100–120mm
Direct-Fit Replacement Can-Am Maverick X3 Throttle Body Clamp
Proven Boost Holding Power: Delivers uniform radial tension to lock silicone couplers onto bead-rolled aluminum and composite throttle body necks without blowing off under boost.
100% 304 Stainless Steel: Zero mild-steel components ensure complete protection against rust, binding, and corrosion in both desert silt and deep snow.
Silicone-Friendly Inner Liner: Engineered to eliminate sharp band perforations, preventing the clamp from biting into or cutting expensive silicone hoses during tightening.
Stamped Size Reference: Size ranges are permanently labeled directly on the band, removing the guesswork when reordering or performing field repairs.
Snowmobile & UTV Tested: Built to endure the violent harmonics, sub-zero temperatures, and high boost cycles of tuned snowmobiles and high-horsepower side-by-sides.
(1) RPM SXS 304 Stainless Steel Replacement Clamp (Size selected at checkout)
Direct replacement across RPM SXS component lines, factory connections, and custom forced-induction setups:
Can-Am Maverick X3 & X3 MAX (All Turbo Models): Dedicated direct replacement for the failure-prone factory throttle body clamp, as well as intercooler and charge pipe junctions.
Turbo Snowmobiles (Ski-Doo, Lynx, Polaris, Arctic Cat): Direct replacement for RPM silicone charge tubes, cold air intake hoses, and turbo inlet elbows.
Universal Powersports & Automotive: Compatible with any silicone coupler, radiator hose, or intake tube falling within the specified millimeter clamping diameter.
RPM Replacement Worm Gear Clamps
Regular price $2.95 Save $-2.95Ensure a rock-solid, leak-free seal across your intake, boost plumbing, and coolant lines with genuine RPM SXS Heavy-Duty 304 Stainless Steel Replacement Worm Gear Clamps! Whether you are servicing an existing RPM kit, replacing worn factory hardware, or assembling a custom powersports plumbing setup, standard hardware-store clamps simply cannot withstand the harsh vibrations, high boost pressures, and aggressive wash routines of off-road machines.
Manufactured entirely from premium marine-grade 304 stainless steel—including the band, drive housing, and worm screw—these clamps provide exceptional tensile strength and complete resistance to rust, oxidation, and seizing. Engineered with a smooth inner band profile, they distribute uniform radial tension around the connection without cutting into, galling, or extruding soft silicone couplers and rubber hoses.
To eliminate the guesswork during trailside servicing or routine garage maintenance, every clamp features its operating millimeter range clearly stamped directly on the side of the band for quick, effortless reference.
Material: 100% High-Grade 304 Stainless Steel (Band, Housing, and Hex-Head Worm Screw)
Design Architecture: High-torque worm drive with smooth inner surface to prevent hose shear and damage
Corrosion Resistance: Marine-grade construction completely impervious to rust, road salt, mud pack, and pressure washing
Size Identification: Operating diameter range permanently stamped on the side of each band
Head Type: Slotted hex-head drive for quick tightening with a socket driver, nut driver, or flathead screwdriver
Select your required size from the options below:
21–38mm
33–57mm
40–63mm
46–70mm
Can-Am Maverick X3 Direct-Fit Throttle Body Clamp
100% 304 Stainless Steel Construction: Zero mild-steel or zinc-plated components ensure the band, housing, and screw never rust, seize, or strip out in wet, muddy, or snowy environments.
Hose-Safe Inner Profile: Engineered to eliminate sharp, slotted edges that chew into expensive multi-ply silicone couplers, vacuum boots, or coolant hoses under high torque.
Clearly Stamped Sizing: Metric diameter range is permanently marked on the side of the band, making field repairs and reordering fast and foolproof.
High-Torque Radial Clamping: Delivers consistent, 360-degree sealing pressure to eliminate boost leaks, air leaks, and fluid weeps under high engine harmonics.
Direct RPM Component Replacement: Direct replacement hardware for RPM charge tube kits, BOV setups, silicone intake tracts, and radiator plumbing.
(1) RPM SXS 304 Stainless Steel Replacement Worm Gear Clamp (Size selected at checkout)
Universal fitment across all RPM SXS component lines, OEM factory connections, and custom powersports applications:
Can-Am Maverick X3 / X3 MAX (All Turbo Models): Dedicated direct replacement for the failure-prone factory throttle body clamp, as well as charge tube and intake junctions.
Powersports & UTV Platforms: Universal fitment for Polaris (RZR Pro R, Turbo R, Pro XP, XP 1000), Can-Am, Kawasaki, and CFMoto intake tubes, boost lines, breather hoses, and coolant plumbing within the specified diameter ranges.
Turbo Snowmobiles & Custom Builds: Fits silicone elbows, intake boots, and charge pipes across Ski-Doo, Lynx, Polaris, and Arctic Cat platforms.
Have questions or want to place an order but need more information! Contact us!