Browse Lynx Shredder Parts. Check the product listing for the exact year, trim, and option before ordering.
2 products
Sale
Quick view
RPM Gen 4 2020-2022 Ski-Doo 850 Turbo Stainless Lightweight Sport Muffler
Regular price $289.95 Sale price $246.95 Save $43.00Upgrade your sled’s throttle response, weight balance, and exhaust tone with the RPM SXS Sport Performance Muffler, engineered specifically for 2020–2022 Ski-Doo and Lynx Gen 4 Turbo snowmobiles! Built for aggressive mountain riding and deep backcountry powder, this lightweight performance muffler delivers an immediate +4 HP gain while shedding a massive 8.4 lbs right off the nose of your sled—weighing in at just 7 lbs total.
Designed to produce a deep, throaty, authoritative mountain exhaust note without being overly loud or obnoxious, this muffler retains the ability to pass the SAE J-2567 stationary sound test at below 88 dB. Constructed from heavy-duty stainless steel and 100% TIG-welded, it features a rugged dual-wall exit tip engineered to deflect rocks, ice, and hidden stumps without crushing or deforming.
Installation is a true bolt-on-and-go process that retains your factory EGT sensor and requires zero permanent sled modifications or extra hardware.
+4 Horsepower Gain: Increases exhaust flow and sharpens turbo throttle response across the RPM range.
8.4 lbs Weight Savings: Weighs just 7 lbs total, drastically reducing front-end weight for easier side-hilling and quicker handling in technical terrain.
SAE J-2567 Sound Compliant: Produces a deep, rich mountain tone while remaining under the 88 dB stationary sound threshold.
Heavy-Duty Dual-Wall Exit Tip: Reinforced dual-wall tip design resists dents, crushing, and damage from rocks, stumps, and hard impacts.
Stainless Steel & 100% TIG-Welded: Built to withstand extreme turbo exhaust gas temperatures (EGTs), moisture, and brutal backcountry abuse.
Retains Factory Systems: Direct bolt-on design preserves full compatibility with your factory EGT sensor and the Ski-Doo SHOT starting system.
No Tuning Required: Direct bolt-on installation—install it and ride with zero ECU modifications needed.
RPM High-Flow Perforated Quiet Core Insert (Optional):
Looking to tone down the volume even further for sensitive riding areas or long trail approaches? Add our high-flowing perforated quiet core insert, which slides directly into the bottom exit of the muffler.
Installation Note: Securing the quiet core requires drilling one small mounting hole in the tip to bolt it in place (all required mounting hardware is included).
(1) RPM SXS Stainless Steel Sport Performance Muffler
(1) High-Flow Perforated Quiet Core Insert & Mounting Hardware (Included if selected)
Direct bolt-on replacement for all Gen 4 850 E-TEC Turbo platforms (fully compatible with Ski-Doo SHOT starting system):
Ski-Doo Gen 4 Turbo Models: 2020–2022 (Summit, Freeride, Backcountry, Renegade — All Trims)
Lynx Gen 4 Turbo Models: 2020–2022 (Boondocker, Shredder — All Trims)
This part is compatible with 6 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2022 | Lynx | 850 Turbo | Gen 4 |
| 2022 | Ski-Doo | 850 Turbo | Gen 4 |
| 2021 | Lynx | 850 Turbo | Gen 4 |
| 2021 | Ski-Doo | 850 Turbo | Gen 4 |
| 2020 | Lynx | 850 Turbo | Gen 4 |
| 2020 | Ski-Doo | 850 Turbo | Gen 4 |
RPM Gen 5 2023-2026 Ski-Doo 850 NA Titanium Chambered Muffler
Regular price $629.95 Save $-629.95Combine whisper-quiet trail manners with maximum 2-stroke power gains and ultra-lightweight titanium construction! The RPM N.A. Q-Muf is a high-performing, free-flowing, mechanically chambered quiet muffler engineered specifically for Naturally Aspirated (N.A.) Gen 5 Ski-Doo and Lynx 850 E-TEC snowmobiles. Only slightly louder than factory sound levels at idle, it delivers massive gains in exhaust velocity, throttle responsiveness, and weight savings.
The secret to the Q-Muf's performance lies in its intelligent internal acoustic architecture. At low RPM and idle, exhaust gases flow through a series of precision pass-through baffles and mechanical chambers to deliver a deep, whisper-quiet sound signature. Under Wide-Open Throttle (WOT), exhaust flow loads the primary chambers and automatically overflows into pass-through channels—allowing exhaust gases to vent freely without power loss, restriction, or backpressure spikes.
Constructed entirely from 100% Titanium with fully welded internals, the Q-Muf weighs in at an astonishing 4.9 lbs total, shedding 11+ lbs off the front chassis compared to the stock muffler. The uniquely designed oval-domed top and bottom muffler body eliminates thermal hot spots and dead zones, ensuring smooth exhaust scavenging. It features an integrated bottom titanium snow plate to block fumes and packed snow from entering the chassis tunnel when submerged in deep powder, as well as an ultra-tough dual-wall titanium exit tip built to withstand hard impacts from rocks and tree stumps.
Horsepower Gain: +2 to +4 HP Increase
Total System Weight: 4.9 lbs
Total Weight Savings: Sheds 11+ lbs compared to the heavy stock muffler
Material & Construction: Full Titanium Structure with Fully Welded Internals
Sound Level Profile: Slightly louder than factory at idle; free-flowing and controlled under WOT
Exit Tip Construction: Heavy-Duty Dual-Wall Titanium
Warranty: Backed by RPM's 3-Year Manufacturer Warranty
ECU Tuning Required: None (Direct drop-in and go)
Smart Mechanical Chambered Design: Transitions seamlessly between whisper-quiet baffled idling and high-CFM free-flowing exhaust pathways under full throttle.
Sheds 11+ lbs of Front-End Weight: Extremely lightweight 4.9 lb titanium build improves front-end agility, side-hilling control, and deep powder flotation.
2–4 HP Performance Increase: Maximizes exhaust gas velocity to improve power delivery and deliver instant throttle response in technical terrain.
Integrated Bottom Snow Plate: Built-in titanium plate seals the belly pan to keep snow and exhaust fumes out of the tunnel when submerged in deep snow.
Heavy-Duty Dual-Wall Titanium Tip: Protrudes further than competitor mufflers for clean exhaust deflection while shielding the outlet from rock and stump impacts.
Oval Domed Muffler Body: Prevents thermal hot spots and exhaust fume dead zones for maximum gas velocity and longevity.
Over-Built Mounting Brackets: Extra-duty reinforced titanium mounts prevent bracket fatigue and failure under severe mountain riding abuse.
100% Direct Bolt-On Setup: Uses original factory mounting points and spring locations with zero body cutting or ECU re-flashing required.
(1) RPM SXS Gen 5 N.A. Titanium Q-Muf Quiet Mechanical Chambered Muffler Assembly
(1) Integrated Bottom Titanium Snow Plate
Direct bolt-on replacement for Gen 5 chassis Naturally Aspirated (N.A.) Ski-Doo and Lynx 850 E-TEC snowmobile models:
Ski-Doo Summit 850 E-TEC (Gen 5 Chassis): 2023–2026
Ski-Doo Freeride 850 E-TEC (Gen 5 Chassis): 2023–2026
Ski-Doo MXZ 850 E-TEC (Gen 5 Chassis): 2023–2026
Ski-Doo Renegade 850 E-TEC (Gen 5 Chassis): 2023–2026
Lynx Shredder 850 E-TEC (Gen 5 Chassis): 2023–2026
This part is compatible with 8 vehicle(s)
| Year | Make | Model | Trim |
|---|---|---|---|
| 2026 | Lynx | 850 E-TEC | Gen 5 NA |
| 2026 | Ski-Doo | 850 E-TEC | Gen 5 NA |
| 2025 | Lynx | 850 E-TEC | Gen 5 NA |
| 2025 | Ski-Doo | 850 E-TEC | Gen 5 NA |
| 2024 | Lynx | 850 E-TEC | Gen 5 NA |
| 2024 | Ski-Doo | 850 E-TEC | Gen 5 NA |
| 2023 | Lynx | 850 E-TEC | Gen 5 NA |
| 2023 | Ski-Doo | 850 E-TEC | Gen 5 NA |
Have questions or want to place an order but need more information! Contact us!