Maverick X3

• TRAX Plus Stereo Bluetooth Intercom. Two Trax 5 pin 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• TRAX Stereo Headsets. Full Stereo, High Quality, Carbon Fiber, Over the Head style Headsets with built in coil cord. Featuring new Full Range, HFI Speakers, Gel Ear Seals and Cloth ear covers.
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.

• TRAX Plus Stereo Bluetooth Intercom. Two Trax 5 pin 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• TRAX Stereo Helmet Wiring Kits. Featuring new Full Range HFI Speakers and Trax Stereo 5 pin Water resistant H2no plug. Easy to install in your own helmet or send to us for professional install.
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.

Complete Stereo in car communications with Trax Plus Stereo helmet wiring kits. Check out our mounting solutions to simplify installation in most UTVs!

What comes in the box:

• TRAX Plus Stereo Bluetooth Intercom. Two Trax 5 pin 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• TRAX Stereo Helmet Wiring Kits. Featuring new Full Range HFI Speakers and Trax Stereo 5 pin Water resistant H2no plug. Easy to install in your own helmet or send to us for professional install..

Complete in car and two-way radio communications without the headsets. Everything you need to install in your vehicle. Add on Trax Stereo headsets, Trax Stereo pre-wired helmets or Trax Stereo helmet wiring kits to complete the system. Check out our mounting solutions to simplify install in most UTVs!

Please note your existing 4 conductor headsets and helmets will not connect to the 5 conductor Trax Stereo Cables. You can purchase an adapter, but your mono headset or helmet will still be mono with the adapter. For the complete Trax stereo experience, purchase a Trax Stereo headset, Trax Stereo pre-wired helmet or Trax Stereo helmet wiring kit.

What comes in the box:

• TRAX Plus Stereo Bluetooth Intercom. Two 12' Headset/Helmet Cables with quick disconnect nexus mil spec connections. 4 seat adds two 16' cables for the rear seats. Optional upgrade to DSP - See upgrade tab.
• Icom F5021 Mobile Radio. 50 watt, VHF, Alphanumeric Display, 128 channels pre-programmed with our stock desert list. Add notes to your order if you would like any special frequencies added.
• Antenna and Coax. 17' Hole Mount Coax and No Ground Plane Antenna.
• Push to Talk Buttons. One Velcro and one panel mount.

Complete in car communications with headsets. Check out our mounting solutions to simplify install in most UTV's!

What Comes in the box:

• 4 Link Pro Elite Intercom. Two 12' and Two 16' Headset/Helmet Cables with quick disconnect nexus mil spec connections. Upgrade to Bluetooth or DSP! (See Below)
• Headsets. Four High Quality, Carbon Fiber, Over the Head style Headsets with built in coil cord.
• Music/Phone Audio Input Cable. Included on standard and DSP models. Sold separately for Bluetooth models. 6' cable allowing you to input music into your intercom or voice conversation from a phone or music device.

Our 4 Link Pro Elite Intercom comes standard with great features like digitally controlled squelch, noise cancellation and automatically muting music when you speak into the mircrophones. Upgrade your intercom to PCI Exclusive Bluetooth and/or DSP Technology.

• DSP - "Digital Signal Processing" electronically removes all noise from the intercom system except your voice. This is a MUST have for vehicles without a windshield, headsets, V8 cars, or loud exhaust. Simple, one touch operation on the face of the intercom allows you to turn on DSP when you need it, and turn it off when you don't.
• Bluetooth - Pair your Cell phone or Bluetooth capable music device player for wireless music and phone calls.  Listen to your music without connecting any wires or have a cell phone conversation without ever connecting your phone to your intercom system. Great for hands free driving! Simple, one touch operation on the face of the intercom allows you to play or pause while music is playing, or answer incoming phone calls!

The Supreme Package comes standard with our Over The Head style headsets. They feature full range, high fidelity speakers. Upgrade Options:

• Behind the Head - Includes Gel Ear Seals, Cloth Ear Covers and a foam mic sock. The rigid bar is across the back of the head. We often recommend BTH for high speed boats as the soft velcro top strap is more aerodynamic.

Our favorite X3 bracket for ease of install while keeping the knobs easily accessible. This bracket replaces the pillars in the X3 and relocates the Start/Stop button.

• Available for Kenwood and Icom Radios
• All Hardware Included
• Some Cutting Required
• Compatible with X3's 2017-2021

Option to add clean looking side panels. 

Before you purchase or install an Icom Radio into your Can Am - PCI strongly recommends upgrading to the Kenwood TK-7360 Mobile Radio. With exceptional RF noise filtering, the Kenwood is a must for UTV's with dual stators like the CanAm and RZR Turbo S. The Kenwood also requires less power to transmit at full strength, ideal for vehicles with smaller batteries or vehicles with a lot of aftermarket accessories. 

Looking for a unique and high quality BOV (Blow-off Valve) This BOV is built to withstand the toughest conditions. This BOV is not like any other BOV on the market. This is a complete seal BOV. You can hook a vacuum pump up to it and it will hold the BOV open until you let the vacuum go. we use a very light spring because of how well it seals. this makes it blow off when the time is right to keep the turbo lit and keep your throttle response quick and reactive like you want!

1. Tested to 500+ horsepower
2. It has that “Blow Off Valve” sound that turbo customers love!
3. Includes a pre filter to keep dirt/sand out of the valve exhaust ports

The SANDCRAFT Steering Rack Stabilizer alleviates stress and wear on your OEM steering rack. By relocating and intercepting the tie rod, the Stabilizer absorbs and dampens the abuse that your OEM rack would typically see. Over 2 years of R&D guarantees that this is the last steering upgrade you will ever need for your machine.

KIT INCLUDES:

• COMPLETE 7075 BILLET HOUSING, STAINLESS STEEL ROD WITH WIPER SEALS
• DRIVER & PASSENGER BILLET CLEVIS – BRACKETS
• (2) BILLET TIE RODS WITH FK 4130 CHROMOLY HEIMS
• ALL MOUNTING AND ASSEMBLY HARDWARE INCLUDED

*DESIGNED FOR 72″ STOCK APPLICATION ONLY (OEM Steering Rack and Suspension)*

When you operate your UTV over 40 MPH you are exceeding what the OE driveline is rated for. Our Driveline was engineered for your machines capabilities and much more. Rated 3 times stronger than stock our upgraded Driveline consists of larger U-joints, yokes and larger diameter shafts with double the wall thickness than the stock/OE drivelines.

Finally you can solve one of the largest issues in your OE drivetrain with the SANDCRAFT Driveline and Carrier Bearing Combo! Stop all vibration using a true phased and balanced driveline and PATENTED carrier bearing combo which will correct the operating angle. THE ONLY COMPLETE SOLUTION TO UTV DRIVETRAIN ISSUES & FAILURES!

U.S. Patent No. 9,862,269

DRIVELINE & C/B COMBO – 17-21 CAN-AM X3 – 2S

This is a greaseable, direct replacement for the SANDCRAFT Driveline U-Joint.

U-JOINT REPLACEMENT – SC DRIVELINE

IF YOU OWN OUR GEN3 CARRIER BEARING THIS NEW GREASE WHIP IS A MUST HAVE!!!

Do you like that you can service your GEN3 carrier bearing, but dread crawling under your RZR to remove the skid plates to access the carrier?

Problem solved!!! Just insert the grease tube into the carrier bearing and you can run the whip right through your center console!

*FITS ALL SANDCRAFT CARRIER BEARINGS

If your machine is leaking oil from the axles/output shaft, or if you are rebuilding the transmission, the SANDCRAFT seals are a must have. After years of R&D we’ve been able to create the most durable, highest heat-rated seal on the market. Designed to precisely fit your machine, these seals will keep your bearings and gears clean by keeping contamination out.

TRANSMISSION SEAL KIT – 2020-2022 RZR XP PRO

SANDCRAFT Limit straps protect your axles and suspension components by preventing the over extension of your suspension at full droop. These straps cushion the drop and protect the shocks, CVs, axles and steering components from damage caused by over extension. Made from the highest quality military-grade webbing, triple-sewn with heat-treated tabs.

INCLUDES
• (2) Front Limit Straps
• (2) Rear Limit Straps
• (8) Class 12.9 Zinc Coated Shock Mount Bolts
• Individualized 6061 Aluminum Spacers
• (4) Velcro tethers

LIMIT STRAP KIT – 2020-2022 – RZR XP PRO

TRANSMISSION SEAL KIT
If your machine is leaking oil from the axles/output shaft, or if you are rebuilding the transmission, the SANDCRAFT seals are a must have. After years of R&D we’ve been able to create the most durable, highest heat-rated seal on the market. Designed to precisely fit your machine, these seals will keep your bearings and gears clean by keeping contamination out.

UPGRADED TRANSMISSION BEARING KIT
The SANDCRAFT upgraded Bearing Kits come from years of racing and engineering and have been designed specifically to outlast and out perform any other bearing on the market. There is simply no comparison between the stock bearings and our bearings. Our kits are designed to handle extreme abuse and heat. Don’t be left behind if you want to keep your machine running smoother longer.

Rebuilding a Transmission can be time consuming and complicated if you don’t have experience or tools. If you fall into this category, send it to us and our certified techs will troubleshoot and correct the problems. This price includes installing our upgraded bearing kit, upgraded seal kit, upgraded bearing retainer kit, then we set the gear lash & bench test before we ship it back.

CERTIFIED SERVICES INCLUDE:
• All upgraded Bearings
• All upgraded Seals
• Modify and set the end play on all the gear shafts
• Clean and recondition the case
• Bench test your transmission before we ship it back
• We can change gear ratios to fit your application
• Gear polishing service also available
• Options available for race modification

* You are responsible for shipping your transmission to us
* Please make sure to fill your transmission with oil once you receive it
* Break in instructions are included

TRANSMISSION REBUILD – 2020-2021 XP PRO & 21 + TURBO S

TRANSMISSION SEAL KIT – If your machine is leaking oil from the axles/output shaft, or if you are rebuilding the transmission, the SANDCRAFT seals are a must have. After years of R&D we’ve been able to create the most durable, highest heat-rated seal on the market. Designed to precisely fit your machine, these seals will keep your bearings and gears clean by keeping contamination out.

UPGRADED TRANSMISSION BEARING KIT – The SANDCRAFT upgraded Bearing Kits come from years of racing and engineering and have been designed specifically to outlast and out perform any other bearing on the market. There is simply no comparison between the stock bearings and our bearings. Our kits are designed to handle extreme abuse and heat. Don’t be left behind if you want to keep your machine running smoother longer.

***SANDCRAFT is proud to offer you this package. This is a very precise job, improper installation can result in transmission failures. Sandcraft DOES not warranty these bearings nor any installation in any way, shape or form. Play at your own risk.***

TRANSMISSION BEARING & SEAL COMBO KIT – 2020-2022 XP PRO

WE ARE THE ONLY COMPANY IN THE WORLD WITH THIS DESIGN SO DON’T WASTE YOUR TIME WITH THE COPYCATS.

SANDCRAFT Motorsports has developed the only true solution for driveline vibration and premature wear. The SANDCRAFT Carrier Bearings use the patented auto set angle feature to correct the driveline angle across multiple UTV platforms. Correcting the driveline angle results in less wear on the output of the transmission and the input of the front differential by eliminating side loading of the bearings. The Carrier Bearing extends the life of the drivetrain. Our Carrier Bearings are fully GREASABLE while having 3 layers of protection to keep dirt, sand, mud and water out. The 2-piece design will dramatically lower installation time and routine maintenance. Correcting the angle of your driveline has never been easier.

WHY PATENT A CARRIER BEARING?
The Carrier Bearing is only part of what we’re correcting with our patent. Your stock driveline angle is severely skewed. This means each joint is experiencing unneeded stress on every rotation. This extreme angle causes loss of power, noise and premature failure. The SANDCRAFT Carrier Bearing is a critical upgrade because it straightens the driveline to the optimal position, re-gains the lost power and improves the entire drivetrain. NOBODY ELSE CORRECTS THIS PROBLEM.

CARRIER BEARING – 2020-2022 PRO XP 4 SEAT

WE ARE THE ONLY COMPANY IN THE WORLD WITH THIS DESIGN SO DON’T WASTE YOUR TIME WITH THE COPYCATS.

SANDCRAFT Motorsports has developed the only true solution for driveline vibration and premature wear. The SANDCRAFT Carrier Bearings use the patented auto set angle feature to correct the driveline angle across multiple UTV platforms. Correcting the driveline angle results in less wear on the output of the transmission and the input of the front differential by eliminating side loading of the bearings. The Carrier Bearing extends the life of the drivetrain. Our Carrier Bearings are fully GREASABLE while having 3 layers of protection to keep dirt, sand, mud and water out. The 2-piece design will dramatically lower installation time and routine maintenance. Correcting the angle of your driveline has never been easier.

WHY PATENT A CARRIER BEARING?
The Carrier Bearing is only part of what we’re correcting with our patent. Your stock driveline angle is severely skewed. This means each joint is experiencing unneeded stress on every rotation. This extreme angle causes loss of power, noise and premature failure. The SANDCRAFT Carrier Bearing is a critical upgrade because it straightens the driveline to the optimal position, re-gains the lost power and improves the entire drivetrain. NOBODY ELSE CORRECTS THIS PROBLEM.

CARRIER BEARING – 2020-2022 PRO XP 2 SEAT

SANDCRAFT offers a full line of upgraded OE replacement Front Differential Bearings and Seals. Improves bearing tolerance, eliminates slop and reduces differential noise. Our kits are designed to handle extreme abuse and heat. After years of R&D we’ve been able to create the most durable, highest heat-rated seal on the market. Designed to precisely fit your machine, these seals will keep your bearings and gears clean by keeping contamination out.

These upgraded parts will strengthen your UTV’s Front Diff and prevent failures. This kit eliminates all of the plastic in a RZR’s front diff and replaces it with Billet and Chromoly parts.

The RCV Performance pro series II axles are designed and engineered to handle the most abusive conditions from trail riding to desert racing. The pro series II axles feature own high-temp spec grease, designed to withstand the harshest environments. The outboard pro series orange boot is built to precise specifications to be puncture resistant and heat resistant up to 450 degrees.

 Features

• 300M axle shaft
• CVs feature 4340 chromoly body and 300M internals
• 40 spline 300M center bar with plunging inboard and outboard CV eliminates halfshaft pull-out
• Designed for extreme racing conditions
• 1 year warranty

 Specifications

• Product Line: Pro Series II
• Position: Rear
• Center Bar Size: 300 m
• Spline Shafts: 40

These links are built using 0.120" Wall Chromoly using heat treated ends and cut to length for the X3 72" models. Both ends are Right-hand threaded for securing the heims in place and ensuring they do not back. These Heavy Duty link replacements are mainly used for strengthening up your X3 over stock components, or make you race ready to finish the race.

Link Set Contains:

• (6) 0.120" Wall Chromoly Links cut to length for 2 uppers, 2 middle and 2 lower links
• (12) 5/8-18 RH Heims with jam nuts
• Mis-alignment spacers

NOTE: You will reuse the OEM fasteners

Add strength while improving ground clearance.

 Kit Contains: 
2 Lower High Clearance link bars
2 Middle Link bars
2 Upper Link bars
12 5/8-18 RH Heims with jam nuts
12 Back plate side mis-alignment spacers
12 knuckle/wheel side mis-alignment spacer

HCR is proud to introduce the all new CAN-AM Defender front forward high clearance a-arms and high clearance rear a-arms both with built in lift. The front arms are pushed forward 2.5” to clear a larger tire.

To build on top of that we built the front and rear control arms to have up to a 3” lift. This lift is built into the arms to make the installation process a breeze. No pesky brackets to deal with.
Designed to tackle all types of terrain, these arms are built out of our proprietary material that are 30% stronger then 4130 Chromoly. To complement the strength and lift the high clearance lower arms are sure to keep you from high centering and keep you moving

 For optimal clearance and performance a 4+3 wheel is recommended.
*Some manufacturers 5+2 wheel will work but confirm true off set

FITMENT

• Can-Am Defender HD 8 XT Cab : 2018+
• Can-Am Defender HD 10 XMR : 2018+
• Can-Am Defender HD 10 XT Cab : 2018+
• Can-Am Defender Limited : 2020+
• Can-Am Defender MAX HD 8 XT Cab : 2018+
• Can-Am Defender MAX HD 10 XT Cab : 2018+
• Can-Am Defender MAX HD 10 XMR : 2019+
• Can-Am Defender MAX Lone Star Edition : 2018+
• Can-Am Defender MAX Limited : 2020+

Can-AM Maverick X3 XDS 64" O.E.M. Replacement Trailing arm Kit. Fits 2 and 4 Seat Models.

To take the already impressive X3 one step further, HCR has developed an American - made product to look, feel and function better than factory. The HCR X3 suspension kit is designed as an OEM Factory replacement kit for the 64" X DS models. The HCR signature High Clearance Trailing arm design increases ground clearance 1.5 inches under key components. Approach angles have been improved for reduced surface attraction and friction.

 MAV-05300-2 64" Rear Suspension Kit includes: 2 Rear Trailing Arms, brake line mounting hardware, and shock bolts.

Note: For this kit you will need to reuse or replace with OEM/aftermarket components: Trailing arm Radial joints, mounting bolts and hardware otherwise not provided.

NOTE: 14" WHEELS WILL NOT FIT

Add clearance, strength and appeal to your Can Am X3 64" with the HCR OEM Elite trailing arms. This true boxed kit follows the HCR Elite portfolio while adding to the aggressive stance of the  X3.

• High clearance Trailing Arm design allows for added ground clearance under key components. 

• Manufactured with HCR Elite Alloy; 30% stronger than 4130 Series Chromoly 

• Internal catacomb design allow for increased strength from hollow factory design . 

• Comparable weight to factory with added structure. 

 NOTE: 14" WHEELS WILL NOT FIT

ALLOW 1-2 WEEKS FOR POWDER COAT, CALL FOR CURRENT LEAD TIMES

 The MAV-05200-2 64" Trailing Arm kitincludes: 2 Rear Trailing Arms, brake line mounting hardware, and shock bolts.

NOTE: For this kit you will need to reuse or replace with OEM/aftermarket components: Trailing arm Radial joints, mounting bolts and hardware otherwise not provided.

HCR Suspension's Can-Am Maverick X3 Elite Trailing arms were designed to keep weight down, add necessary strength and providing the unique look that only HCR provides. These replacement trailing arms are retaining the factory width of 72" and do not add any travel, however they do provide greater ground clearance by improved approach angles and a solid slate bottom surface to ensure you wont get caught up on anything on the trail. This X3 Elite Trailing arm kit comes with 2 Trailing arms (Driver and Passenger), 2 new lower Shock mounting bolts, Brake line hardware and every other piece is reusing factory hardware.

Trailing arms can be purchased Raw material or powder coat is done as an additional option. The material our arms are built from do rust/corrode so coating them is Highly recommended. 

 NOTE: 14" WHEELS WILL NOT FIT