RZR XP Turbo

Treal Performance 2020 Polaris RZR ProXP Full 3 Inch Turbo Back Exhaust System

Treal Performance is excited to release exhaust options for the new 2020 Polaris RZR ProXP. We have made a beautiful 3 Inch Full Stainless Steel Turbo Back Exhaust System. Full Stainless Steel unit that is 100% TIG welded together. This system is a full 3 inch turbo back with mandrel bends with options for a straight through resonated front section or non resonated straight pipe front section then to a straight through muffler with a 3 inch single tip. This exhaust system will give you maximum power gains but yet not be too loud. Our Treal Performance exhaust sounds as good as it looks, giving a deep rumble but not leave your ears ringing at the end of the day. The resonated front section option will be the quietest option

Features

• 3-Inch Turbo Back Exhaust

• 100% Stainless Steel Crafted Unit

• High End Quality

• 100% Tig Welded

• Built In House In The USA

• Food Grade Stainless Steel

• Micro Brushed Finish

• Option For Resonator In Front Section

• Single Tip Or Dual Tip Option

• Light Weight Design

• 6lbs Lighter Than Stock Muffler

• 5 Year Limited Warranty

• Great Sound, Deep Rumble

• Work with Factory Rear Bumper Cover

Treal Performance has added a new exhaust system to our Treal Performance Product line. This time its for 2016-2019 Polaris RZR XP Turbo. We have made a beautiful “Slip-On Muffler” exhaust system. Full Stainless Steel unit that is 100% TIG welded together. This system bolts onto the stock front exhaust section and instantly expands out to 3 inch, flowing through mandrel bends and a big free flowing straight through muffler to give maximum power gains but yet not be too loud. Our Treal Performance “Slip-On Muffler” sounds as good as it looks, giving a deep rumble but not leave your ears ringing at the end of the day.

Does Not Fit ProXP

Features

• 100% Stainless Steel Crafted Unit

• Up to 8+ Wheel Horse Power Gains

• High End Quality

• 100% Tig Welded

• Built In House In The USA

• Food Grade Stainless Steel

• Micro Brushed Finish

• Light Weight Design

• 6lbs Lighter Than Stock Muffler

• 5 Year Limited Warranty

• Great Sound, Deep Rumble

• Work with Factory Rear Bumper Cover

Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut to reach all four corners of your small to mid-sized vehicle with some wiggle room on each lead to route the wiring any desired way. This kit includes four 400 lumen rock lights and wiring for a truly turn key kit.

These LED lights are waterproof and can be mounted virtually anywhere. All that is needed is 12 volt power. They have a 180 degree optic to illuminate your wheel wells or anywhere else you need a bright and smooth light.

Caution: Rock Light can get very hot when used for long periods of time. Please use caution when handling or installing.

Available Colors:

• Amber
• Blue
• Green
• Red
• White

Included With Kit:

• Wiring Harness
• x4 Rock Lights

NOTE: These lights will only work with a 12 volt charging system.

Product Description

Standard cages feature full D.O.M. construction and include three pass. front V-bars in windshield, roof bracing, and proper gusseting.

All SDR standard cages are jig built in house to exacting tolerances and are fully welded by our proffesional staff.

XPR-2 Sport Cage Features:

• Radius Roof Design
• DOM Tube Construction
• Aluminum Roof Panel Included
• All Gusseting/Whip Tabs Included
• SDR Hi-Bred Bolt-in Doors Available

Dont sacrifice safety for a cheaper price!!!

Oversize Shipping

At SDR Motorsports Inc we ship cages and complete packages every day to places all over the world. We can ship your cage raw or powdercoated and ready to install. We take time to wrap every cage To protect it from shipping damage and offer affordable insurance for every shipment in case damage does occur. Freight costs are constantly changing up and down so once you place your order we will contact you with Exact costs and shipping options. Charges range from as low as $150.00 to most west coast states and around $300.00 to most eastern states. Residential delivery charges and extra fees may apply to more rural locations Will call pick-up from your local terminal can also be arranged to avoid extra charges.

Our new "Shorty" cage is perfect for those not wanting a rear bumper. This cage features all the aspects you have come to expect from SDR Motorsports including our new Precision CNC bent all D.O.M. design with Laser Notching for a perfect fit everytime.

Get all the Strength, Safety, and Style you expect without all the extra wieght!

Standard cages feature full D.O.M. construction and include three pass. front V-bars in windshield, roof bracing, and proper gusseting.

All SDR standard cages are jig built in house to exacting tolerances and are fully welded by our proffesional staff.

XPR-2 Shorty Cage Features:

• Radius Roof Design
• DOM Tube Construction
• Aluminum Roof Panel included
• All Gusseting/Whip Tabs Included
• SDR Hi-Bred Bolt-in Doors Available

Dont sacrifice safety for a cheaper price!!!

Oversize Shipping

At SDR Motorsports Inc we ship cages and complete packages every day to places all over the world. We can ship your cage raw or powdercoated and ready to install. We take time to wrap every cage To protect it from shipping damage and offer affordable insurance for every shipment in case damage does occur. Freight costs are constantly changing up and down so once you place your order we will contact you with Exact costs and shipping options. Charges range from as low as $150.00 to most west coast states and around $300.00 to most eastern states. Residential delivery charges and extra fees may apply to more rural locations Will call pick-up from your local terminal can also be arranged to avoid extra charges.

Our Adventure rack is packed with industry leading features

Solid construction, built in house.

Commercial Grade Paddle Latch mechanism allows easy opening with one hand.

Slam Latch dual catch mechanism ensures positive closing and stays shut!

Adjustable to fit most cages

MUST ORDER TIRE STRAP SEPARATE

Removable package tray allows mounting of coolers, roto pak, and other gear

FITS UP TO A 35 SPARE WITH STOCK CAGE, SDR PRE-RUNNER CAGE, SDR SHORTY CAGE. AND MOST CAGES WITHOUT A REAR BUMPER

will fit most aftermarket cages, Call with any questions on fitment with your particular cage.

After over a year in the making we are proud to provide our solid 4140 ball joints for the Polaris RZR.

Features include:

• Super strong Full 4140 Chromoly Construction
• Unique adjustment features
• Unique greasing features that ensure long wear
• State of the art Nitride treating for wear resistance and anti friction
• Sold as a complete set of 4
• FULL LIFETIME WARRANTY

These joints have been rigorously tested, beat, and pushed well beyond what most would call normal or even heavy duty use.

These ball joints have been used in several UTV platforms running various race series and have performed very well under pressure.

Our ball joints are composed of 7 seperate parts put together to form one unit. Those parts are as follows

• Boot: Used for keeping contaminants out of the indie of the joint itself.
• Stem: The main component in the ball joint where all the pressure is transferred to which connects to the knuckle.
• Body: The component that holds the stem in place
• Wear Plate: A small convex disc that is used as the wearable item just under the stem. It is used to transfer torque from the adjustment nut to the stem.
• Adjustment nut: This is the item you will adjust as the unit wears to maintain a tight ball joint. The adjustment nut threads into the main body and is used to maintain pressure on the wear plate so that the joint stays tight.
• Locking Cap: The locking cap is responsible for holding the ball joint assembly into the control arm itself.
• Adjustment Nut Jamb Bolt: This component is used to jumb the adjustment nut into place. Once desired tension is set on the stem via the adjustment nut, this jamb bolt is used to hold the adjustment nut and wear plate in place.

The most unique and proprietary part of our ball joints is the way in which we deliver grease to the stem itself. Through all 4 components which make up the inside of the ball joint their is a hole that is drilled through them allowing grease to be inserted into the flush mount grease fitting in the adjustment nut jamb bolt and pass all the way to the ball joint stem. In the stem there is a cross drilled hole that then allows grease to exit the side of the stem and grease the stem all the way around via a grease groove around the outside. Once grease is on the outside of the stem we have a unique spiral groove that when the ball joint is pivoted then carries the grease to the upper most portion of the ball joint. Ensuring that the entire stem is greased to keep wear down and even more importantly keep water and other contaminants out.

Every component in our ball joint was designed and machined in house from U.S. made 4140 chromoly. After all components have been checked they then proceed on to receive a very high quality and durable Liquid Nitride Treating. This treating is used to further harden the material and give it another layer of protection as an anti friction coating and as a case hardening treatment as well. This coating is applied by one of the countries top nitride coating facilities who's treatment prcoess has been hand picked from companies like Glock, Sig Sauer, Barret, along with countless NASCAR race teams and aerospace industry leaders. Needless to say, when we selected a coating for our joints, we wanted the best of the best.

All joints are protected by a FULL LIFETIME WARRANTY against workmanship defects AND damages including broken items. Every component is also available for purchase separately so that you can service the ball joints if you ever wear them out.

Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market.

We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability. No substitutions accepted. The inner joint housing is compressed to create a preload on the ball that will stay tight roughly 3 times longer than the standard injected Teflon rod end, which is the standard in the industry. 

Our rods are fully covered by a no hassle no BS warranty. If you damage a rod in any way we guarantee to replace it no questions asked, at all. We stand behind everything we produce and leave no doubt at our level of customer satisfaction.

 Set includes 4 rods total. 

2 Billet High Clearance

2 Billet Straight

All heim joints and needed hardware included. 

Please allow one additional week for all colors other than Black.

If you've made it this far into our website, you are likely here for one reason. You are in search of a quality product at a quality price, and receive red carpet customer service.

Well, we are here to let you know go ahead and click the check out button below!

But, if you want to know more details.... then if you insist we can go over those as well.

Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market.

We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability. No substitutions accepted.

Our rods are fully covered by a no hassle no BS warranty. If you damage a rod in any way we guarantee to replace it no questions asked, at all. We stand behind everything we produce and leave no doubt at our level of customer satisfaction.

Set inlcudes 4 rods total.

2 Billet High Clearance

2 Billet Straight

All heims and needed hardware included.

Please allow one additional week for all colors other than Black. Please call with color before choosing the color option to verify it is something we can do.

For the ultimate package check out our which complements our rods tremendously well.

Our sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all high quality hardware and chromoly heim joints.

Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

This fits all Models of the Polaris RZR 1000 and turbo

If you are tired of breaking weak factory sway bar end links or perhaps you are just looking for a nice high quality upgrade, then you have no reason to look any further, because we have you covered.

Our upgraded sway bar end links main body is machined from Billet 6061 aluminum hex bar stock. They are then machined with a taper on each end to add style.

They then go through a rigorous cleaning process to remove all oils and debris from the machining process. After they are cleaned they are immediately coated with a heavy duty anodize coating to provide an attractive and durable finish that is sure to provide superior protection even in the toughest environments.

Bodies are then laser etched for that final piece to really set them off.

All of our links come with full chromoly heims capable of support over 19,000 lbs of work load.

Link kits consist of two links for the rear of the vehicle. Kits also include new bolts, nuts, and washers for a complete and seamless installation.

As with all of our products we strive for the absolute highest quality. So with that being said we offer our links with a FULL LIFETIME WARRANTY from workmanship and defects. If for any reason at all your part should fail, we will gladly either replace or repair whichever YOU prefer.

We have taken a lot of extra time and effort to make sure all parts not produced directly by us are made right here in the USA, this is something we take very seriously.

Give us a try, we promise not to disappoint.

Polaris RZR Through Axle Wheel Bearing Grease Tool

This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

Polaris RZR Bearing Grease Tool

This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

If you have owned your RZR or other UTV you have probably learned of the importance in keeping your wheel bearings in perfect operating condition. With our tool you will relieve the strain of that time consuming task.

Polaris UTV bearings are known to contain little grease right off the shelf, so it is advised to grease your bearings now, new or old. A simple job will go a long way towards preserving the overall mechanical condition of your investment.

With the OEM bearing tool it is required to remove the axle atleast, and in most cases the entire hub it's self, adding hours to your maintenance time. With our tool all tbat is required is removing your wheel, brake caliper, and spindle providing wide open acces to the bearing. Then simply slide our tool in and use your grease gun to lubricate your bearings. Our tool has many benefits.

-Decrease maintanence time
-Decrease operating costs
-Decrease material waste from conventional greasing methods
-Increase Reliability of your UTV
-Low Cost
-Designed and produced in the U.S.A
-Precision machined with the highest quality equipment from 6061 solid Aluminum bars giving you a quality piece that will last as long as your newly greased bearings

If you are wondering if you really do need our tool. Consider this, the cost of one bearing alone will cost $22-$40 depending on brand, shipping, taxes, availability etc. Add in the time it will take you to replace them OR the added cost the have your dealer or shop do it for you. For the cost of one bearing replacement alone you are over half way to purchasing a tool that will simplify life for you.

Our tool features a benefits over the competition by being design with a double o ring seal to make sure the bearing is greased completely. The more grease inside the better!

Do yourself a favor cut down on down time an increase time on the trail! Order our tool today

Our tool fits all 44MM split bearings found in the following models.

Please be advised, that though we strive to make our tool as simple to use as possible, that differences in end user tools may require additional work. It has come to our attention that certain grease gun ends may require you to remove the two radius arm bolts and sliding the axle inwards slightly to allow room for your end to snap on. If you have any questions with these please contact us.

Although we have put effort into compiling this list. Please verify fitment before ordering.

Front

Ranger 500 EFI : 2010
Ranger 570 Full Size : 2015+
Ranger 570 Crew Full Size : 2015+
Ranger 800 EFI : 2010-2014
Ranger 800 Crew : 2010-2014
Ranger 800 6x6 : 2011+
Ranger 900 XP : 2013+
Ranger 900 Crew : 2015+
Ranger 900 Diesel : 2012-2014
Ranger 900 Crew Diesel : 2011-2014
Ranger XP 1000 : 2017
RZR 570 : 2012-2015
RZR S 800** : 2009-2014 (with hub conversion)
RZR 800** : 2008-2014 (with hub conversion)
RZR 4 800 : 2010-2014
RZR 900 : 2011+
RZR 4 900 : 2011+
RZR S 900 : 2015+

RZR 900 XP : 2011+
RZR 1000 : 2014+
RZR S 1000 : 2016+
RZR XP Turbo : 2016+
RZR 4 1000 : 2014+ : 2014+
Scrambler 850 : 2014-2015
Scrambler 1000 : 2014+
Sportsman 550/Touring/X2 : 2010-2014
Sportsman 850/Touring/X2 : 2012+
Sportsman 1000/Touring/X2 : 2015+

Rear

Forest 850 EU : 2015
Forest 1000 EU : 2015
General : 2016+
RZR 900 : 2011+
RZR 4 900 : 2012+
RZR S 900 : 2015+
RZR 900 XP : 2011+
RZR 1000 : 2014+
RZR S 1000 : 2016+
RZR 1000 Turbo : 2016+
RZR 4 1000 : 2014+
Scrambler 850 : 2014-2015
Scrambler 1000 : 2014+
Sportsman 550/Touring/X2 : 2010-2014
Sportsman 850/Touring/X2 : 2012+
Sportsman 1000/Touring/X2 : 2015+

We have had questions regarding the hub conversions on the 800 RZR models. The answer is yes it will work even if you have not had the hub conversions. The conversion was a Polaris upgrade for the 09 and early 10 model years. Then became standard equipment. It was first believed by many 800 RZR owners that the upgraded part was completely different. However, the bearings are all the same between all models. The difference is the later model and early model upgrade kits, hubs were stronger and thus had a different design. So to answer people questions we made sure to note that this tool DOES in fact fit all front 800 bearings in all models.

Warranty exclusively applies to workmanship and manufacturing defects upon receiving your tool.

Warranty will not be given due to misuse or negligence while using your grease tool.

Any damages during shipping are to be reported within 24 hours of receiving your tool. Damages should be reported along with photos of any related articles (boxes, envelopes, packing materials or other evidence to further support damage in transit)

Only one tool included. Pictures are for representation purposes only.

If you are looking for the strongest pull plate on the market for the most affordable price, look no further, because you have arrived at your destination.

When we thought up the interchangeable pull plate, we were greeted with overwhelming success and a real game changer solution for many people in the market. However, we still had a vast majority of people who just simply wanted a more basic and affordable option. They didn't need the versatility that came with our interchangeable plate, nicknamed the B.A.M.F plate for short, and just needed an upgraded piece compared to the factory unit at an affordable price. Well, we came in with an answer.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for anodize and then round all of our corners to give it a look that really pops and will wow anyone.

The anodize used is not your typical decorative anodize but yet it is a ceramic based hard coat anodize that not only lasts longer but can be up to two times stronger than standard anodize. This ensures that your plate will be protected from abrasions and corrosion for a long time to come.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the U.S.

2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing your pull plate for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To figure this out we need to derermine the bolt head size by using either a 15mm socket for 10mm shank bolts, or an 18mm socket for 12mm shank bolts. If you determine you have a 10mm shank bolt please order a 2016 Pull Plate instead, and this will ensure we deliver the correct plate.

The Hi-Bred revolution continues....

With over a year in development and testing our new bolt on doors are ready for your ride! We didnt just copy the factory doors, We started with a clean sheet of paper and and set out to design and build a set of doors that are rattle free, easy to install and adjust, are strong, and completely sreviceable over the years ensuring they work perfect for years to come.

It all started with our patent pending single pivot aluminum hinge. We didnt settle for a gate hinge or re-purposed fence hardware, we designed our new hinge from the ground up, specifically for our doors. We had a tough act to follow given our old weld in doors where the industry standard and most copied design and hinge on the market, but we set the standard before, and we have done it again!

Styled and designed to look more like a custom fixed door instead of a bolt on door we feature full length 1 piece 3-D formed aluminum panels that are Dzus buttoned on and look as good as they work! This exlusive design allows maximum opening room to get in and out of your car.

Doors are sold in sets.

Join the Hi-Bred evolution today....

Clean Simple Bed Storage for your XP!

No bulky hardware or funky clamps to figure out. Just remove two bolts and drill two holes and your ready to carry all your gear with you!

Bed bags feature a full top Zipper enclosure with net storage pockets inside.

Perfect for tool bags, soft coolers, jackets, and just about anything else you can shove in it!

***BED STORAGE BAGS ARE NOT FOR STORING OR CARRYING FUEL OR FLAMMABLE SUBSTANCES OF ANY TYPE***

• Add some SDR Style to your ride!

  these side grills are easy to install, look great, and will fit all 2017 and newer polaris models!

  Will also fit any model with updated TALLER side vents.

  Choose your color or let us know what custom color you want!

  SDR side grills are designed to fit directly over the pre filter and are installed in just minutes using the supplied rivets.

  ADD A CUSTOM FRONT GRILLE TO COMPLETE THE LOOK!

Although compact at 3” by 3”, don’t be fooled by its size, the Squadron Pro IR 850nm LED light is more powerful than most larger lights on the market today. This light is perfect for covert applications such as military, and hunting.

950 nm Specifications:
LED: 4 Osram 940nm LEDs
mW: 3960mW
mW/sr: 1700mW/sr
Weight: 12 ounces
Wattage/Amps/Volts: 11W, .80A at 13.80Vdc, .40A at 27.6Vdc
Dimensions: 3.07” x 2.76” x 3.07”
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Built-In Overvoltage Protection
Exceeds MIL-STD810G (Mil-Spec Testing)
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Includes:

• Squadron Pro, IR LED Light
• Mounting Bracket

UTV RTL CanAm Maverick X3, Polaris RZR 1000 Wiring Harness

This harness was designed for someone looking for a harness that is long enough to reach the mounting location of your RTL on your two or four seat Can-Am or RZR. The harness comes equipped with high quality sheathing and a relay to power all the functions; running light, brake, and cargo/reverse light. If you have purchased an RTL-S please purchase harness 64-0111 which will include a rectangular rocker switch to plug into your factory dash.

UTV RTL-S Turn Signal Harness

The harness comes complete with a red backlit rocker switch which flashes to indicate the direction you are turning. This switch is designed to install directly into your factory dash location. There is also another switch which gives you a dust light option illuminating amber lights simultaneously. This harness must be used in combination with the 64-0116.

The S2 Sport features the same quality, fit, and finish that is synonymous with the Baja Designs name, at an attractive price point. The S2 Sport is ideal as a fog, cornering, rack, or reverse light and much more. A compact and powerful light, featuring quality that is second to none.

Includes:

• S2 Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Take your UTV side by side to the next level with our Baja Designs UTV vehicle specific mounting kits. This kit comes equipped with a pair of Squadron Pro LED lights that will truly light up the night at 9,800 lumens at 80 watts. Whether you’re looking for more trail coverage or just need more light for outdoor working conditions, these Squadron Pro LED lights have you covered.

Includes:

• (2) Squadron® Pro LED Lights
• Mounts Specified to Selection
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (10°) and Spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

The XL Sport makes it easy to light up your world in style, with the perfect combination of affordability and performance. The XL Sport LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern. The XL Sport provides the same top of the line performance and aesthetics you expect from BD in an affordable solution. All Baja Designs LEDs are backed by a 30 Day Satisfaction Guarantee & Limited Lifetime Warranty for the ultimate in purchase protection.

Note: A Skene dimmer must be purchased separately to enable the high/low feature.

Includes:

• XL Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

With a higher lumen count and lower power draw of 40 watts, the XL-R series is the only single housing LED auxiliary light on the market that has the distance of an 8” HID with the smooth spread of an LED. The XL Pro LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern, and offers a 50% dimming feature. Perfect for enthusiasts that need a vast amount of light and are looking for something other than a light bar. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Squadron Racer Racer Edition
Baja Designs is proud to introduce the Squadron Racer Edition, with 4,300 lumens. The Squadron Racer Edition throws light an average of 40% further than the Squadron Pro with High-intensity LED, housed in hard anodized and powder coat cast aluminum. Enjoy nearly 50,000 hours of bright, efficient lighting to enhance your nighttime off-roading experiences! As always, Baja Designs provides the best in auxiliary LED lights with a 30 Day Satisfaction Guarantee, and Limited Lifetime Warranty.

Includes:
· Squadron Racer Edition LED Light
· Mounting Bracket


Patterns:

Spot: A longer and narrower 7° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights.

Squadron-R Pro

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,328 lumens of pure power, low amp draw of 4.06 amps, and nearly 50,000 hours of LED life. The S8 also features upgraded reflectors, an amber backlit feature, and new scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection!

Includes:
· S8 10” LED Light Bar
· Mounting Brackets

Please note that this light does NOT include a harness and the applicable harness to this light is 640115

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Complete harness for Baja Designs XL (Pro & Sport) LED Light.

This harness takes all the guess work out of installation and is incredibly high quality suited for race use!

This harness allows you to use the high beam or toggle switch to turn on the LED light.

Features:

• Includes Toggle switch for On/Off and Momentary button for dim mode.
• Heavy duty wire gauge.
• Complete with battery ring terminals, relay, sheathing, fuse.
• 100" wire length between battery ring terminals and weatherpack for bumper or roof mounting.

Includes:

• (1) XL (Pro & Sport) Wire Harness w/Mode-2 lights max 325 watts (64-0119)
• (1) OnX6/XL (Pro & Sport) Wiring Harness Splitter - adds 1 light (61-3608)

Separate yourself from the pack with the Baja Designs Polaris RZR XP1000/RS1 "Unlimited" Headlight Kit (2014 - Current). This kit utilizes two Squadron Pros (4,900 lumens each) and two Squadron Racers (4,300 lumens each). The need for front bumper lighting or roof mounted light bars are a thing of the past. This plug and play mounting kit includes two vehicle specific mounting brackets and a wiring harness, allowing you to use your factory switch and mounting hardware.

Included:

- (2) Vehicle Specific Mounting Brackets

- (2) Plug & Play Adapters

- All Necessary Hardware

- (2) Squadron Pro Combo

- (2) Squadron Racer Edition Spot

Wondering what lighting configuration is best for you? Checkout the breakdown below showcasing multiple performance tiers.

Sportsmen:
(2) Squadron Sport Combo
(2) Squadron Sport Spot
Pro:
(2) Squadron Pro Combo
(2) Squadron Pro Spot
Unlimited:
(2) Squadron Pro Combo
(2) Squadron Racer Edition Spot

Application:

• RZR XP 1000 2014-Current
• RZR RS1 18-Current
• RZR 1000 Turbo-S 18-Current