Honda

Our shift gate is one item we created with comfort and ease of use in mind. 

The shift gate enables you to quickly and easily shift between forward and reverse gears even without looking!

With the factory shift gate it is necessary to move the shift lever over to the right then forward or backwards each time you want to shift gears. With our shift gate once you are in gear, gear change is as simple as forward and backward, saving time between gear changes and keeping your eyes on the trail, not on the shift knob.

Features include:

• Gated shift between reverse and forward
• One section for forward to reverse in low and one section for forward to reverse in high.
• Made from aircraft grade 6061 T6 Aluminum
• Powder coated or raw finishes available
• Bolts directly in, no cutting or modifications of the vehicle necessary
• New mounting hardware included

As with every product we make everything is made here in the U.S.A and comes with a full lifetime warranty.

If you are one of the more extreme riders out there, that push things to the limits and are the first to find the known failure points then you have likely experienced tie rod failure on your Honda Talon. Or perhaps you are just the type that prefers to upgrade it before it breaks. Regardless of which category you fall into we have exactly what you need.

Tie rods are machined from the exact same Billet aircraft grade hex aluminum as our radius rods, so you know for a fact they will take a beating. Our tie rods are machined to accept the factory steering rack end so nothing additional is needed to install.

Rods feature our signature ceramic based hard coat anodize for increased wear resistance, as well as the absolute best heim joints on the market the FK JMX rod ends. In steering components especially we only use the best of the best and do not give options of the KMX heims as we do with other components.

Be careful with using inferior joints in any type of critical suspension and or steering component. Not only do they wear very quickly, they are not as strong and will cause alot of annoying noise after they wear a little.

Our tie rods also feature a connection point for the knuckle side that is made from solid 4140 Chromoly and replaces the factory taper bushing. In doing so this results in a larger pin in the knuckle area and eliminating a failure and weak point.

Comes as a pair of two (2) tie rods to service the entire vehicle. This is an entire kit and nothing additional is needed to install.

These feature our FULL LIFETIME WARRANTY as well. You break or bend it we will replace it. Simple as that.

If you've made it this far into our website, you are likely here for one reason. You are in search of a quality product at a quality price, and receive red carpet customer service.

Well, we are here to let you know go ahead and click the check out button below!

But, if you want to know more details.... then if you insist we can go over those as well.

Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market.

Our rods also boast a full 3 INCHES OF ADDED GROUND CLEARANCE!! So take the washed out trail with confidence in mind.

We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability on the high clearance lower rods and use FK brand JMX heims on the upper. There is no better joint to use on the planet.

Our rods are fully covered by a no hassle no BS warranty. If you damage a rod in any way we guarantee to replace it no questions asked, at all. We stand behind everything we produce and leave no doubt at our level of customer satisfaction.

 Set includes 4 rods total. 

2 Billet High Clearance

2 Billet Straight

All heims and needed hardware included. 

When you demand more power from your machine you need somewhere to store that power. That's exactly what our battery tray is for. 

Designed for rigidity and long lasting service it fits neatly and securely under the hood of your Talon. It also uses all existing holes in the frame so there is no need to cut or drill anything new. 

Laser cut and CNC bent from 1/8 steel this battery tray will be sure to hold up for a long time. It is designed to accommodate most all popular batteries on the market. 

Comes in black power coat and includes all hardware needed to fasten it to the frame, and a rubber strap to secure the battery.

Will fit a battery up to these dimensions  W-9 1/4'   L-6 1/4'    H-7'

As with all of our parts it is backed by a full lifetime warranty. If you break or bend it we will replace it guaranteed. 

Kit Includes:

• High Clearance Rods
• Billet Pull Plate
• Rear Sway Bar Links
• Tie Rods

Our sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all high quality hardware and FK brand JMX joints standard!

Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

Model X and R take different products so be sure to select the correct vehicle.

If you are tired of breaking weak factory sway bar end links or perhaps you are just looking for a nice high quality upgrade, then you have no reason to look any further, because we have you covered.

Our upgraded sway bar end links main body is machined from Billet 6061 aluminum hex bar stock. They are then machined with a taper on each end to add style, and heavy duty powder coat for a long lasting finish.

All of our links comes standard now with FK Brand JMX joints. This is an added cost but is drastically increases the life and wear of the links.

Link kits consist of two links for the rear of the vehicle. Kits also include new bolts, nuts, and washers for a complete and seamless installation.

As with all of our products we strive for the absolute highest quality. So with that being said we offer our links with a FULL LIFETIME WARRANTY from workmanship and defects. If for any reason at all your part should fail, we will gladly either replace or repair whichever YOU prefer.

We have taken a lot of extra time and effort to make sure all parts not produced directly by us are made right here in the USA, this is something we take very seriously.

Sold as a pair (2) to service one (1) vehicle

Give us a try, we promise not to disappoint.

The Honda Talon comes inadequately equipped with a strong or easy to use tow point. Well, we have the fix for you!

If you are looking for the strongest pull plate on the market for the most affordable price, look no further, because you have arrived at your destination.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 Aluminum bar stock and precision machined with fitment, function, and value in mind!

We have taken bumper fitment into consideration and made this plate fit a vehicle with a factory bumper installed.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the southeast U.S.

This part includes our standard industry leading lifetime warranty. Simply put you break it we replace it. Simple as that.