CA Tech Can-Am X3 Billet Rear Sway Bar Links
Regular price $199.95 Save $-199.95Our sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all high quality hardware and FK brand JMX joints standard!
Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.
This fits all Models of the can am X3
If you are tired of breaking weak factory sway bar end links or perhaps you are just looking for a nice high quality upgrade, then you have no reason to look any further, because we have you covered.
Our upgraded sway bar end links main body is machined from Billet 6061 aluminum hex bar stock. They are then machined with a taper on each end to add style, and heavy duty powder coat for a long lasting finish.
All of our links comes standard now with FK Brand JMX joints. This is an added cost but is drastically increases the life and wear of the links.
Link kits consist of two links for the rear of the vehicle. Kits also include new bolts, nuts, and washers for a complete and seamless installation.
As with all of our products we strive for the absolute highest quality. So with that being said we offer our links with a FULL LIFETIME WARRANTY from workmanship and defects. If for any reason at all your part should fail, we will gladly either replace or repair whichever YOU prefer.
We have taken a lot of extra time and effort to make sure all parts not produced directly by us are made right here in the USA, this is something we take very seriously.
Ca Tech Can-Am X3 72" Billet Front Sway Bar End Links
Regular price $95.00 Save $-95.00Our Front sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all stainless hardware and chromoly heim joints.
Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.
This fits ALL Models of the can am X3. No exclusions
If you are tired of breaking weak factory sway bar end links or perhaps you are just looking for a nice high quality upgrade, then you have no reason to look any further, because we have you covered.
Our upgraded sway bar end links main body is machined from Billet 6061 aluminum hex bar stock. They are then machined with a taper on each end to add style.
They then go through a rigorous cleaning process to remove all oils and debris from the machining process. After they are cleaned they are immediately coated with a heavy duty anodize coating to provide an attractive and durable finish that is sure to provide superior protection even in the toughest environments.
Bodies are then laser etched for that final piece to really set them off.
All of our links come with full chromoly heims capable of support over 19,000 lbs of work load.
Our link kits are provided with all 304 stainless hardware. Yes that's right all bolts, nuts and washers are made from high grade stainless steel to resist corrosion and give you long term dependability.
As with all of our products we strive for the absolute highest quality. So with that being said we offer our links with a FULL LIFETIME WARRANTY from workmanship and defects. If for any reason at all your part should fail, we will gladly either replace or repair whichever YOU prefer.
We have taken a lot of extra time and effort to make sure all parts not produced directly by us are made right here in the USA, this is something we take very seriously.
Give us a try, we promise not to disappoint.
CA Tech Can-Am X3 Light Duty Pull Ring / Tie Down
Regular price $60.00 Save $-60.00So maybe the factory pull plate is good for you right now. You don't see the need to upgrade. But perhaps would like a place to tie your rig down while transporting. Or you maybe need to pull something small, so you need a less expensive option compared to our full Billet pull plate. Well we think we have a solution for you.
Made from aircraft grade billet aluminum we have produced a nice subtle upgrade for your X3 that could be used for a variety of things. Hardcoat ceramic anodized after machining to give it a long lasting and durable coating. Then engraved afterwards to let everyone know where you got it!
This can be mounted directly on top of the OEM pull plate using the center two mounting points only.
If you want to save a little extra money, and maybe not spring for the full billet plate just yet, this has you written all over it.
Made with pride in America and backed by our FULL lifetime warranty. Just like every other part we make. Warranty is simple, you break it we replace it. Simple as that.
CA Tech Polaris RZR Rear Sway Bar Links
Regular price $165.00 Save $-165.00Our sway bar end links are the perfect upgrade for the factory link replacement. Our links are made from Billet 6061 Aluminum using all high quality hardware and chromoly heim joints.
Our parts are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.
This fits all Models of the Polaris RZR 1000 and turbo
If you are tired of breaking weak factory sway bar end links or perhaps you are just looking for a nice high quality upgrade, then you have no reason to look any further, because we have you covered.
Our upgraded sway bar end links main body is machined from Billet 6061 aluminum hex bar stock. They are then machined with a taper on each end to add style.
They then go through a rigorous cleaning process to remove all oils and debris from the machining process. After they are cleaned they are immediately coated with a heavy duty anodize coating to provide an attractive and durable finish that is sure to provide superior protection even in the toughest environments.
Bodies are then laser etched for that final piece to really set them off.
All of our links come with full chromoly heims capable of support over 19,000 lbs of work load.
Link kits consist of two links for the rear of the vehicle. Kits also include new bolts, nuts, and washers for a complete and seamless installation.
As with all of our products we strive for the absolute highest quality. So with that being said we offer our links with a FULL LIFETIME WARRANTY from workmanship and defects. If for any reason at all your part should fail, we will gladly either replace or repair whichever YOU prefer.
We have taken a lot of extra time and effort to make sure all parts not produced directly by us are made right here in the USA, this is something we take very seriously.
Give us a try, we promise not to disappoint.
Have questions or want to place an order but need more information! Contact us!