All Products

If you are like many and suffer from a failed radius rod you know how bad it can be for that big ride. We have a solution to solve all of that for you.

We produce a quality solid Billet aluminum radius rod to replace the weak factory pieces.

Our rods are machined from a solid piece of 1.25 Billet hex aluminum. That's right one and a quarter inch of solid Billet aluminum. These rods are larger than majority of similar products on the market, and sure to stand up to the abuse. Our radius rods are then hard coat anodized then they receive all 304 stainless jamb nuts for anti corrosion and heavy duty 5/8 chromoly heims. We also machine our own misalignment spacers from a solid bar stock of 304 stainless, giving you the highest quality fit and finish possible.

• Product benefits are:
• 1.25 Solid Billet Aluminum Material
• Hard Coat Anodize
• Stainless Hardware
• 5/8" Chromoly Heims
• Stainless Misalignments Spacers
• Sold as a set of six (6)

Machined after anodize to put the final touches on an already quality piece.

We offer only FK brand heims with all of our products for a superior fit, and long lasting product every time. However, we offer two series of heim joints from FK precisoin rod end line.

• KMX-For a high quality rod end on a budget. These are a very strong and dependable rod end, however they will tend to be a little noisy as they wear due to the injected nylon race.

• JMX- For the best of the best rod end on the market that also inlcudes a PTFE liner. These are top of the line rod ends with a trated allow steel body, and a full hardcoat treated ball. We only supply these with a PTFE liner for longevity and do not supply to metal on metal joint.

And as always our radius rods, like all of our products, have a FULL LIFETIME WARRANTY against defects. You break it we replace it, just as easy as that.

IMPORTANT NOTE: These radius rods utilize a right hand thread on BOTH ends of the rod. This does make adjustment more difficult, however the radius rods are preset for your vehicle and need no adjustment. Using right hand threads on both ends of the rod also makes it impossible for the jamb nuts to ever loosen and cause the rod to completely unscrew itself from the machine.

We pride ourselves on introducing the first changeable pull plate for your Can-Am X3. The CA Technologies B.A.M.F Pull Plate allows you to quickly change between different attachments depending on what your needs are. Our pull plate is guaranteed to perform flawlessly or your money back!

• -Solid Billet Aluminum 1.5″ 6061 construction
• -Precision machined for a beautiful finish and fit every time
• -Solid B18.3 Grade 8 Shoulder Bolts that maintain a shear rating of 84,000 lbs
• -Lifetime Warranty

***Important Note*** Most two inch hitches that you purchase will require the end going into the receiver to be trimmed so that it will fully slide in.

Want something completely indestructible? Do you want something so awesome it almost got it banned from 11 states? If you answered yes, we have you covered.

Next in the line up of high quality, unique, and useful parts from CA Technologies is a pull plate unlike any other. Not only is it thicker then your third grade teachers coke bottle glasses, it holds a single feature that stands above the rest. It is interchangeable.

Interchangeable with what you may ask? Well then allow us to explain.

Our pull plate is designed in such a way that within a matter of seconds you will easily and effortlessly change between different attachments of your choosing. Currently those attachments consist of 3 major components. The Tow Hook, for tow straps, chains or winch cables. The Tow Loop for small cables, synthetic ropes, or very large clevis'. And last but nor least the standard two inch receiver.

***Important Note*** Most two inch hitch's that you purchase will require the end going into the receiver to be trimmed so that it will fully slide in.

Now, you may be wondering just how fast you can interchange between attachments? Or perhaps you are reluctant to believe our claim of within a matter of seconds. Watch this short video where in just 79 seconds to be exact we change between all three attachments. (Warning the blazing speed seen in this video is not for the faint of heart. We will not be responsible for seizures induced by the lightning quick flashes, or permanent burns to your retina and/or eye muscle strain from trying to follow the action.)

https://youtu.be/eH128CZvt0M

So now that the excitement is all over lets get down to business. What can you expect to get from our pull plate? You will have the ability to quickly swap between attachments and NEVER have to remove the main base of the plate. That means once mounted you have no need to mess with the radius rods anymore. You will simply remove the two shouldered bolts from the pull plate, swap the pieces you want, then re tighten. It really is as simple as that. And if you don't believe me, revisit the video above.

All of our plates are machined by us here in the U.S.A. We machine them out of a solid piece of Billet 6061 Aluminum along with the tow hook, and tow loop attachments. The only steel attachment is the 2 inch receiver which is machined from 1018 steel. Each pull plate comes in raw aluminum, if you would like colors please email us so we can accommodate you. 2 inch receivers come in a standard black texture powder coat, however we can arrange other colors for you.

• Full Safety Glass
• Aluminum Frame with Powder Coat
• Standard Textured Black
• Air Flow Flap Adjusters

FITS 1000/1000 TURBO 2014-18 WITH SDR RACING CAGE

Keep you and your passengers safe from the elements with this full glass front windshield. Makes riding better rain or shine! BAMMMM!

• Full Safety Glass
• Aluminum Frame with Powder Coat
• Standard Textured Black
• EASY INSTALLATION!

Keep you and your passengers safe from the elements with this full glass rear windshield. Makes riding better rain or shine!

Standard Textured Black is stocked, if you would like a custom color, allow 2 weeks. Message us about colors in the CONTACT US section.

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

We take great pride in our customer service, attention to Detail and making sure you feel great about your purchase. Call or email us if you have any questions about options, Pricing or ordering.

This chair can be customized with any colors you prefer, please if you would like to customize your order, contact us directly via our contact page!

Two is always better than one, right? We think so, which is why we’re offering a pair of S2 Pro LED auxiliary lights with wiring harness for the price of $359.95. The S2 Pro LED Light offers an incredible 2,450 lumens out of a tiny 3” x 2” housing. The S2 Pro is quite literally the brightest LED light ounce for ounce on the market. The S2 Pro can be mounted where traditional lights would never fit. Moreover, it only draws 24 watts so your electrical system will barely know it’s there. This LED is perfect for all your adventures! An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Includes:

• (2) S2 Pro LED Lights
• Mounting Brackets
• Wiring Harness

Patterns:


Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Looking for more safety out on the trail? Baja Designs' RTL is your answer. This light features a running light, brake light, amber dust light, and white light and is a must for all enthusiasts looking for extra safety.

• Running Light
• Brake Light
• White Light
• Amber

Includes:

• RTL, 30" Light Bar
• Mounting Hardware

RTL-S

The RTL-S comes with integrated flashing amber turn signals for higher visibility and performance off-road. Also featuring a running light, brake light, and white work/cargo light, this bar is a must for all enthusiasts looking for extra safety.

• Flashing Amber Turn Signals
• Running Light
• Brake Light
• White Light

Includes:

• RTL-S, 30" Light Bar
• Mounting Hardware

RTL-G

Looking for more safety out on the race course? Baja Designs' RTL-G is your answer. This light features race legal rear taillight specifications and is a must for all drivers looking for that reassurance of being seen when leading the pack.

Lighting Features:

• Running Light
• Brake Light
• Green Safety Light (Designated for slow moving)
• Flashing Amber

Specifications:
Wattage/Amps:
Running Light with Flashing Amber and Solid Amber: 10W
Brake Light w/Flashing Amber and Solid Amber:28W
Green Safety Marker: 19W
Dimensions: 32.125" x 2.15" x 1.5"
Weight: 3.75 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

(RTL Patent D802,187)

Includes:

• RTL-G, 30" Light Bar
• Mounting Hardware

RTL-B

Looking for more safety out on the race course? Baja Designs' RTL-B is your answer. This light features race legal rear taillight specifications and is a must for all drivers looking for that reassurance of being seen when leading the pack.

Lighting Features:

• Running Light
• Brake Light
• Blue Safety Light (Designated for slow moving)
• Flashing Amber

Baja Design Features:

Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%

Specifications:

Wattage/Amps:
Running Light with Flashing Amber and Solid Amber: 10W
Brake Light w/Flashing Amber and Solid Amber:28W
Blue Safety Marker: 19W
Dimensions: 32.125" x 2.15" x 1.5"
Weight: 3.75 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

(RTL Patent D802,187)

Includes:

• RTL-B, 30" Light Bar
• Mounting Hardware

Set your Polaris RZR apart from the rest with our OEM Polaris RZR grille kit. This kit comes equipped with our powder coated grille mount, a 10” OnX6 LED light bar and wiring harness. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Application: Polaris RZR XP900 (2015-16) & Polaris RZR XP1000 (2014-16).

Includes:

• OnX6 10” LED Light Bar – Driving Combo
• BD Custom Grille
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

With a higher lumen count and lower power draw of 40 watts, the XL-R series is the only single housing LED auxiliary light on the market that has the distance of an 8” HID with the smooth spread of an LED. The XL Pro LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern, and offers a 50% dimming feature. Perfect for enthusiasts that need a vast amount of light and are looking for something other than a light bar. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

The XL Sport makes it easy to light up your world in style, with the perfect combination of affordability and performance. The XL Sport LED light utilizes our trademarked High Speed Spot reflectors providing for a longer beam pattern. The XL Sport provides the same top of the line performance and aesthetics you expect from BD in an affordable solution. All Baja Designs LEDs are backed by a 30 Day Satisfaction Guarantee & Limited Lifetime Warranty for the ultimate in purchase protection.

Note: A Skene dimmer must be purchased separately to enable the high/low feature.

Includes:

• XL Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (44°) and spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 44° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Take your UTV side by side to the next level with our Baja Designs UTV vehicle specific mounting kits. This kit comes equipped with a pair of Squadron Pro LED lights that will truly light up the night at 9,800 lumens at 80 watts. Whether you’re looking for more trail coverage or just need more light for outdoor working conditions, these Squadron Pro LED lights have you covered.

Includes:

• (2) Squadron® Pro LED Lights
• Mounts Specified to Selection
• Wiring Harness

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (10°) and Spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

• Full Safety Glass
• Aluminum Frame
• Standard Textured Black Powder Coat
• Air Flow Flap Adjusters

Keep you and your passengers safe from the elements with this full glass front windshield. Makes riding better rain or shine!

Standard Textured Black is stocked, if you would like a custom color, (pictured) allow 2 weeks. If you select a custom color, we will call you to ask what color you would like.

FITS 900S/1000/1000 TURBO

• Full Safety Glass
• Aluminum Frame with Powder Coat
• Standard Textured Black
• Air Flow Flap Adjusters

FITS 1000/1000 TURBO WITH VENT RACING CAGE

Keep you and your passengers safe from the elements with this full glass front windshield. Makes riding better rain or shine! WHOOP, there it is!

ALSO SHOWN IN THIS PIC, BLACK AND RED GRILL FOR TURBO~$149.00

SAVE $113.00 BY ORDERING THE 3-PC PACKAGE

• ALUMINUM HARDTOP WITH POWDER COAT
• ALUMINUM WINDSHIELD WITH POWDER COAT
• ALUMINUM GRILL

FITS 1000 TURBO 2-SEATER

Keep you and your passengers safe from the elements with this full glass front windshield and hardtop. Makes riding better rain or shine! Then top off your ride with a sweet grill.

COLOR NOTE: Textured Black is standard for Windshield and the vent of the Grill.

You pick your accent color for (Hardtop, Windshield Accent and Grill Frame)

After over a year in the making we are proud to provide our solid 4140 ball joints for the Can-Am X3.

Features include:

• Super strong Full 4140 Chromoly Construction
• Unique adjustment features
• Unique greasing features that ensure long wear
• State of the art Nitride treating for wear resistance and anti friction
• Sold as a complete set of 4
• FULL LIFETIME WARRANTY

These joints have been rigorously tested, beat, and pushed well beyond what most would call normal or even heavy duty use.

These ball joints have been used in several UTV platforms running various race series and have performed very well under pressure.

Our ball joints are composed of 7 seperate parts put together to form one unit. Those parts are as follows

• Boot: Used for keeping contaminants out of the indie of the joint itself.
• Stem: The main component in the ball joint where all the pressure is transferred to which connects to the knuckle.
• Body: The component that holds the stem in place
• Wear Plate: A small convex disc that is used as the wearable item just under the stem. It is used to transfer torque from the adjustment nut to the stem.
• Adjustment nut: This is the item you will adjust as the unit wears to maintain a tight ball joint. The adjustment nut threads into the main body and is used to maintain pressure on the wear plate so that the joint stays tight.
• Locking Cap: The locking cap is responsible for holding the ball joint assembly into the control arm itself.
• Adjustment Nut Jamb Bolt: This component is used to jumb the adjustment nut into place. Once desired tension is set on the stem via the adjustment nut, this jamb bolt is used to hold the adjustment nut and wear plate in place.

The most unique and proprietary part of our ball joints is the way in which we deliver grease to the stem itself. Through all 4 components which make up the inside of the ball joint their is a hole that is drilled through them allowing grease to be inserted into the flush mount grease fitting in the adjustment nut jamb bolt and pass all the way to the ball joint stem. In the stem there is a cross drilled hole that then allows grease to exit the side of the stem and grease the stem all the way around via a grease groove around the outside. Once grease is on the outside of the stem we have a unique spiral groove that when the ball joint is pivoted then carries the grease to the upper most portion of the ball joint. Ensuring that the entire stem is greased to keep wear down and even more importantly keep water and other contaminants out.

Every component in our ball joint was designed and machined in house from U.S. made 4140 chromoly. After all components have been checked they then proceed on to receive a very high quality and durable Liquid Nitride Treating. This treating is used to further harden the material and give it another layer of protection as an anti friction coating and as a case hardening treatment as well. This coating is applied by one of the countries top nitride coating facilities who's treatment prcoess has been hand picked from companies like Glock, Sig Sauer, Barret, along with countless NASCAR race teams and aerospace industry leaders. Needless to say, when we selected a coating for our joints, we wanted the best of the best.

All joints are protected by a FULL LIFETIME WARRANTY against workmanship defects AND damages including broken items. Every component is also available for purchase separately so that you can service the ball joints if you ever wear them out.

Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market.

We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability. No substitutions accepted. The inner joint housing is compressed to create a preload on the ball that will stay tight roughly 3 times longer than the standard injected Teflon rod end, which is the standard in the industry. 

Our rods are fully covered by a no hassle no BS warranty. If you damage a rod in any way we guarantee to replace it no questions asked, at all. We stand behind everything we produce and leave no doubt at our level of customer satisfaction.

 Set includes 4 rods total. 

2 Billet High Clearance

2 Billet Straight

All heim joints and needed hardware included. 

Please allow one additional week for all colors other than Black.

After over a year in the making we are proud to provide our solid 4140 ball joints for the Polaris RZR.

Features include:

• Super strong Full 4140 Chromoly Construction
• Unique adjustment features
• Unique greasing features that ensure long wear
• State of the art Nitride treating for wear resistance and anti friction
• Sold as a complete set of 4
• FULL LIFETIME WARRANTY

These joints have been rigorously tested, beat, and pushed well beyond what most would call normal or even heavy duty use.

These ball joints have been used in several UTV platforms running various race series and have performed very well under pressure.

Our ball joints are composed of 7 seperate parts put together to form one unit. Those parts are as follows

• Boot: Used for keeping contaminants out of the indie of the joint itself.
• Stem: The main component in the ball joint where all the pressure is transferred to which connects to the knuckle.
• Body: The component that holds the stem in place
• Wear Plate: A small convex disc that is used as the wearable item just under the stem. It is used to transfer torque from the adjustment nut to the stem.
• Adjustment nut: This is the item you will adjust as the unit wears to maintain a tight ball joint. The adjustment nut threads into the main body and is used to maintain pressure on the wear plate so that the joint stays tight.
• Locking Cap: The locking cap is responsible for holding the ball joint assembly into the control arm itself.
• Adjustment Nut Jamb Bolt: This component is used to jumb the adjustment nut into place. Once desired tension is set on the stem via the adjustment nut, this jamb bolt is used to hold the adjustment nut and wear plate in place.

The most unique and proprietary part of our ball joints is the way in which we deliver grease to the stem itself. Through all 4 components which make up the inside of the ball joint their is a hole that is drilled through them allowing grease to be inserted into the flush mount grease fitting in the adjustment nut jamb bolt and pass all the way to the ball joint stem. In the stem there is a cross drilled hole that then allows grease to exit the side of the stem and grease the stem all the way around via a grease groove around the outside. Once grease is on the outside of the stem we have a unique spiral groove that when the ball joint is pivoted then carries the grease to the upper most portion of the ball joint. Ensuring that the entire stem is greased to keep wear down and even more importantly keep water and other contaminants out.

Every component in our ball joint was designed and machined in house from U.S. made 4140 chromoly. After all components have been checked they then proceed on to receive a very high quality and durable Liquid Nitride Treating. This treating is used to further harden the material and give it another layer of protection as an anti friction coating and as a case hardening treatment as well. This coating is applied by one of the countries top nitride coating facilities who's treatment prcoess has been hand picked from companies like Glock, Sig Sauer, Barret, along with countless NASCAR race teams and aerospace industry leaders. Needless to say, when we selected a coating for our joints, we wanted the best of the best.

All joints are protected by a FULL LIFETIME WARRANTY against workmanship defects AND damages including broken items. Every component is also available for purchase separately so that you can service the ball joints if you ever wear them out.

Looking for a custom storage solution for your SDR Doors?

Dont use some "Universal Fit" bags, our door storage bags are made to our specification and fit our doors perfectly.

Installation is easy with no bolts or screws, just drill two additional holes and use the supplied push pins!

Sold as a pair - Left and Right.

These Bags Fit BOTH the two and Four Seat Front Doors.

Fronts and rears available separately.

Our new bumper bolts on for a clean look with superior protection for the front of your car. Our bumper ties back into the front chassis and works with our bulkhead gusset kit to provide the ultimate in strength and good looks.

Bumpers come complete and ready to bolt on with no modifications to your car other than two simple holes to drill. each bumper comes with a tab for a light or front mounted whip and a skid plate.