Whalen Speed

WSRD Can-Am WS180 (215HP) Performance Package | 91+ Octane

Regular price $1,333.00 Save $-1,333.00
0 in stock
The WS180ME Package was developed to be the best stock turbo premium pump gas (91+ Octane) combination available. Startup, drive-ability, and power delivery is carefully calibrated to give the best experience possible while enjoying your machine. With proper clutching you can expect 185 wheel horsepower | ~215 Crank Horse Power. The standard WS180 package is designed to be safe for an essentially stock machine as well some standard modification. Exhaust, intercooler upgrades, intercooler tube/pipe, and intake kits are acceptable.

***Max Effort takes the experience and performance to perfection. We work with each client to dial the machine in for maximum boost for the modifications and the fuel being used. This adds another level of performance for the guys who want to spend the time to get it dialed in for their exact machine. Each machine has slightly different fuel pressure, injector flow, conditions and fuel. We add a Dynojet Wideband into the system that datalogs along with all the other important ecu information that is sent to us via email. Revisions will be sent back and forth until the tune for your machine is perfected. ***

Tune Features:

  • Radiator fan activation temp lowered from ~200* F to ~180* F
  • Intercooler fan activation temp lowered from ~140* F to ~95*F
  • Torque limits for L raised to 100%, reverse raised to 75%
  • Component protection mode for fueling lowered to increase torque and horsepower, especially right after the pedal is floored. 
  • Ignition timing per cylinder is optimized for maximum power as well as drive-ability, careful consideration was used not only for when at wide open throttle, but as well as cruise, throttle transitions, ect.
  • Boost pressures are increased up to 18-20 PSI respectively for the octane you choose to run. Crack pressure set to 9 PSI (ensure a minimum of 5 threads exposed on the factory wastegate rod when the jamb nut is tight to ensure the actuator has enough travel to control the wastegate flapper/boost)
  • Throttle feel and control is thoughtfully improved, to control through a whoop section, on/off feel in short course style racing or playing in the woods, eco mode is improved but offers the less aggressive pedal for technical rock sections or simply loading on a trailer. 
  • Eco mode offers 10% reduction in boost pressure.
  • Speed limits removed, your speed limit is your rev limiter/gear
  • Rev limiter raised to 9000 RPM
  • Rough road detection is raised to max to prevent power loss.
  • Max Effort is available for individuals who want to dial in there specific machine and also get assistance with clutching. Communication done via email. 

Power Output:

  • WSRD WS180 Tune: 187/180 Wheel Horsepower | 215-205 Crank Horsepower
    • 93 Octane: ~20 PSI Boost
    • 91 Octane: ~18 PSI Boost
  • 2018+ 120HP Models | Stock; 109 Wheel Horsepower | 120 Crank Horsepower
  • 2017 154HP Models | Stock; 132 Wheel Horsepower | 154 Crank Horsepower
  • 2018+ 172HP Models | Stock; 153 Wheel Horsepower | 172 Crank Horsepower

    What's Included?

    • DynoJet Power Vision
      • WSRD 91 & 93 octane calibrations preloaded in PV3 for simple install
    • WSRD 1050X Injector Set + PNP Adapters
    • WSRD Wastegate

    Max Effort (ME) Edition: (additional items)

    • WS180ME 91+ Octane Tune Upgrade
    • DynoJet Wideband for AFR datalogging
    • Custom datalog review and revisions for maximum performance

    PLEASE NOTE: The WS180-WS240X Kits can use the 2017 Turbo R/120HP turbo Model fuel pump assemblies. The WS205 and higher packages will require our high volume fuel pump to maintain proper fuel pressure and flow to the injectors. It is not required to purchase a 2018 fuel pump housing for these kits. Just please note which model/housing you have when purchasing.