Suspension

• Strengthen front end
• Protect your axles
• Adds cushion to shocks
• One kit that does it all!

The ultimate suspension and drive train problem solver for your X3! Our design incorporates your shock tower brace to add the functionality of a limit strap system. Add in our frame gusset plate to strengthen up your front end, and have you prepared to tackle anything.

 If you are looking for a way to save on costly axle replacements and want a way to save your shocks from bottoming out? Tired of trying to enjoy a day of riding only to be cut short because you have an axle popped out of your differential. Don’t let your axles pop out of the differentials anymore, with our limit straps protect your axles & suspension components by preventing the over extension of your  suspension. Our easy to install kit allows to cushion the drop and protect the shocks, axles, & steering components from damage caused by over extension.

We have a unique and simple design that utilizes the shock tower brace as a mounting point for the limit straps. No more need for complex mounting needed, with our system you get two solutions from one single kit.

Our shock tower brace is machined out of  solid billet aircraft grade aluminum on state of the art equipment to ensure you get the best quality parts available. We also incorporate a unique hard coat anodize process that involves a ceramic infused mixture to give your brace an even higher quality finish and longevity. As always we provide a nice laser etch logo to let everyone know who you trust for your needs!

Our limit straps are produced specifically for us using the same high strength webbing material used seat belt material used in all OEM manufacturing. We then raise the bar even more by providing a double layer of sewn material. Our strap webbing is designed to have a load strength of twelve thousand pounds! You can rest assured our system will do its job time and time again.

Your kit will be shipped with all Grade 10.9 Metric coated hardware and instructions for installation.

Shock tower braces are available in additional colors. Typically a one week lead time will apply to colors other than standard black.

Be sure to view our quick detach sway bar links to have the perfect suspension system!

Products may vary slightly from time to time and without notice. We reserve the right to improve our products at anytime through whatever means we see necessary.

As is the norm with all products are proudly manufactured here in the U.S.A!!

Lifetime warranty is included which protects you from workmanship and defects. Warranty does not cover wear items, or extensive abuse beyond the scope of this product.

Features include:

6061 billet aircraft grade aluminum

Superior straps made from dual layer material rated at 12,000 lbs breaking strength to ensure your machine is well protected

Grade 10.9 hardware

Stainless Spacers

Proudly made in the U.S.A

Kit includes straps, hardware, billet aluminum shock tower brace, and frame gusset plate.

FRAME GUSSET PLATE

The gusset plate  is a necessary solution in many cases. The gusset plate helps to make X3  more rigid by reducing deflection in the front end of the machine, as well as adding a little bit of beef to the front of the machine.

When using the X3 to its potential there is a very high risk of causing extra deflection in the front end letting the upper shock mount area and the lower frame where the control arms connect move undesirably from the shock load. Tie your frame together with this gusset and our upper shock tower brace making it best way to protect that precious radiator fan from permanent and expensive damage.

You must use this with either our limit strap system or with our aluminum shock tower brace to be effective. This gusset plate will not attach to your factory pieces.

Made from 3/16 mild sheet steel, tig welded and includes a grommet for hoses to pass through without damage.

If you are looking for the strongest pull plate on the market for the most affordable price, look no further, because you have arrived at your destination.

When we thought up the interchangeable pull plate, we were greeted with overwhelming success and a real game changer solution for many people in the market. However, we still had a vast majority of people who just simply wanted a more basic and affordable option. They didn't need the versatility that came with our interchangeable plate, nicknamed the B.A.M.F plate for short, and just needed an upgraded piece compared to the factory unit at an affordable price. Well, we came in with an answer.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for anodize and then round all of our corners to give it a look that really pops and will wow anyone.

The anodize used is not your typical decorative anodize but yet it is a ceramic based hard coat anodize that not only lasts longer but can be up to two times stronger than standard anodize. This ensures that your plate will be protected from abrasions and corrosion for a long time to come.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the U.S.

We pride ourselves on introducing the first changeable pull plate for your Can-Am X3. The CA Technologies B.A.M.F Pull Plate allows you to quickly change between different attachments depending on what your needs are. Our pull plate is guaranteed to perform flawlessly or your money back!

• -Solid Billet Aluminum 1.5″ 6061 construction
• -Precision machined for a beautiful finish and fit every time
• -Solid B18.3 Grade 8 Shoulder Bolts that maintain a shear rating of 84,000 lbs
• -Lifetime Warranty

***Important Note*** Most two inch hitches that you purchase will require the end going into the receiver to be trimmed so that it will fully slide in.

Want something completely indestructible? Do you want something so awesome it almost got it banned from 11 states? If you answered yes, we have you covered.

Next in the line up of high quality, unique, and useful parts from CA Technologies is a pull plate unlike any other. Not only is it thicker then your third grade teachers coke bottle glasses, it holds a single feature that stands above the rest. It is interchangeable.

Interchangeable with what you may ask? Well then allow us to explain.

Our pull plate is designed in such a way that within a matter of seconds you will easily and effortlessly change between different attachments of your choosing. Currently those attachments consist of 3 major components. The Tow Hook, for tow straps, chains or winch cables. The Tow Loop for small cables, synthetic ropes, or very large clevis'. And last but nor least the standard two inch receiver.

***Important Note*** Most two inch hitch's that you purchase will require the end going into the receiver to be trimmed so that it will fully slide in.

Now, you may be wondering just how fast you can interchange between attachments? Or perhaps you are reluctant to believe our claim of within a matter of seconds. Watch this short video where in just 79 seconds to be exact we change between all three attachments. (Warning the blazing speed seen in this video is not for the faint of heart. We will not be responsible for seizures induced by the lightning quick flashes, or permanent burns to your retina and/or eye muscle strain from trying to follow the action.)

https://youtu.be/eH128CZvt0M

So now that the excitement is all over lets get down to business. What can you expect to get from our pull plate? You will have the ability to quickly swap between attachments and NEVER have to remove the main base of the plate. That means once mounted you have no need to mess with the radius rods anymore. You will simply remove the two shouldered bolts from the pull plate, swap the pieces you want, then re tighten. It really is as simple as that. And if you don't believe me, revisit the video above.

All of our plates are machined by us here in the U.S.A. We machine them out of a solid piece of Billet 6061 Aluminum along with the tow hook, and tow loop attachments. The only steel attachment is the 2 inch receiver which is machined from 1018 steel. Each pull plate comes in raw aluminum, if you would like colors please email us so we can accommodate you. 2 inch receivers come in a standard black texture powder coat, however we can arrange other colors for you.

The Geiser Performance Bulk Head was designed to enhance the durability of your X3’s front suspension and chassis. Constructed of 4130 chromoly steel, this product is guaranteed to offer unsurpassed performance.

• Fits all Can-Am Maverick X3 models

 PLEASE NOTE 2 WEEK LEAD TIME ON SHOCK TOWER KITS

CA Technologies Billet upper shock brace is a high quality piece built for a multitude of uses. Although its a main focal point and a real eye catcher, it gets deeper than that.

We engineered our shock tower brace to be used in several applications. Utilizing our brace as the main mounting point for things like limit straps, and a farme gusset kit, this will be the center of vehicle protection for your X3.

Our brace is designed in house to be as close of a replacement to factory fitment as possible, while still strengthening key components. It is a direct replacement, so no flipping of shocks, trimming of plastics, or modifications of any kind to run this brace. 

Milled from solid Billet 6061 Aluminum bar stock. Then finished with a hard coat ceramic anodize fro abrasion resistance. Our logo is then milled into the top to compliment the brace and really make the whole piece pop. 

Everything is designed and manufactured here in the U.S at our facility in Cleveland, TN.

Our brace and all of its components carry a lifetime warranty against workmanship and defects. 

Frame Gusset Plate

The gusset plate  is a necessary solution in many cases. The gusset plate helps to make X3  more rigid by reducing deflection in the front end of the machine, as well as adding a little bit of beef to the front of the machine.

When using the X3 to its potential there is a very high risk of causing extra deflection in the front end letting the upper shock mount area and the lower frame where the control arms connect move undesirably from the shock load. Tie your frame together with this gusset and our upper shock tower brace making it best way to protect that precious radiator fan from permanent and expensive damage.

You must use this with either our limit strap system or with our aluminum shock tower brace to be effective. This gusset plate will not attach to your factory pieces.

Made from 3/16 mild sheet steel, tig welded and includes a grommet for hoses to pass through without damage.

 *THIS KIT DOES NOT INCLUDE LIMIT STRAPS! IT IS THE SHOCK TOWER BRACE, AND GUSSET KIT ONLY!

The Geiser Performance Bumper and Bulkhead Combo adds superior strength to the front suspension and chassis as well as provide a stylish front bumper with a bolt-on skid plate. All made from 4130 chromoly.

The Geiser Performance Link Plate makes it easier than ever to strap down your X3. Constructed of .188 4130 TIG- welded chromoly steel, these link plates handle whatever you have to throw at them.

• Fits all Can-Am Maverick X3 models

If you are one of the more extreme riders out there, that push things to the limits and are the first to find the known failure points then you have likely experienced tie rod failure on your Can-Am X3. Or perhaps you are just the type that prefers to upgrade it before it breaks. Regardless of which category you fall into we have exactly what you need.

Tie rods are machined from the exact same Billet aircraft grade hex aluminum as our radius rods, so you know for a fact they will take a beating. Our tie rods are machined to accept the factory steering rack end so nothing additional is needed to install.

Rods feature our signature ceramic based hard coat anodize for increased wear resistance, as well as the absolute best heim joints on the market the FK JMX rod ends. In steering components especially we only use the best of the best and do not give options of the KMX heims as we do with other components.

NOTE: Pictures currently only show KMX heims. However those will be updated and you will receive JMX heims ONLY.

Effective 11/1/19 all items will ship in black finish with no millings. Millings can be added on a case by case basis. *Actual product vary slightly from item pictured.

OPTIONAL BUMP STEER REDUCTION SPACERS 

Our tie rods also feature patented ST geometry that place a long spacer on the upper side which shifts the tie rod geometry further down than stock helping reduce an issue known as bump steer. Bump steer is essentially oscillation of the steering components as the suspension components cycle up and down. as the suspension compresses and extends, when the steering geometry is not in line with the suspension geometry this will cause the vehicle to unexpectedly change the toe degrees. This in turn causes extra negative feedback in the steering wheel and will drastically increase resistance in drive ability as well as increased wear on other components.

We call this a bump steer reduction as that is more closely what it is. Since we must operate within the mounting points of the factory knuckle, there is only so much adjustment that can be made. However, this kit will almost completely rid your vehicle of bump steer.

If you are looking for the strongest pull plate on the market for the most affordable price, look no further, because you have arrived at your destination.

When we thought up the interchangeable pull plate, we were greeted with overwhelming success and a real game changer solution for many people in the market. However, we still had a vast majority of people who just simply wanted a more basic and affordable option. They didn't need the versatility that came with our interchangeable plate, nicknamed the B.A.M.F plate for short, and just needed an upgraded piece compared to the factory unit at an affordable price. Well, we came in with an answer.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for anodize and then round all of our corners to give it a look that really pops and will wow anyone.

The anodize used is not your typical decorative anodize but yet it is a ceramic based hard coat anodize that not only lasts longer but can be up to two times stronger than standard anodize. This ensures that your plate will be protected from abrasions and corrosion for a long time to come.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the U.S.

2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing your pull plate for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To figure this out we need to derermine the bolt head size by using either a 15mm socket for 10mm shank bolts, or an 18mm socket for 12mm shank bolts. If you determine you have a 10mm shank bolt please order a 2016 Pull Plate instead, and this will ensure we deliver the correct plate.

These upper and lower a-arm braces replace the weak factory gusset plates as well as add an additional brace for the upper arms.

If you already have the Geiser Performance Bulkhead, you will only need one of the lower a-arm brackets.

Replaces the factory piece with the Geiser Performance 4130 chromoly steel shock tower mount. Fits all Maverick X3 models.

*Raw products are not powder coated clear. If you choose to purchase raw, it will need to have some coating applied otherwise it will rust. Clear coat is available for an additional cost upon special request.

KIT SHOWN IN RED FOR PICTURES ONLY. PRODUCTION KITS ARE POWDER COATED BLACK

Our 4 piece Gusset kit is exactly what the front of your X-3 needs! This kit is simple and easy to install and makes all a-arm mounting points double shear. both upper gussets tie back into the chassis for the ultimate in strength.

Add our front bumper kit for the ultimate in strength and style!

Does not fit RC!