RZR

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our Fuego, PreRunner, LaPaz, Squadron and SII.

It includes an On/Off toggle button to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.

Polaris RZR Through Axle Wheel Bearing Grease Tool

This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

Polaris RZR Bearing Grease Tool

This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly.

Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials. Feel confident that your hard earned money stays here.

If you have owned your RZR or other UTV you have probably learned of the importance in keeping your wheel bearings in perfect operating condition. With our tool you will relieve the strain of that time consuming task.

Polaris UTV bearings are known to contain little grease right off the shelf, so it is advised to grease your bearings now, new or old. A simple job will go a long way towards preserving the overall mechanical condition of your investment.

With the OEM bearing tool it is required to remove the axle atleast, and in most cases the entire hub it's self, adding hours to your maintenance time. With our tool all tbat is required is removing your wheel, brake caliper, and spindle providing wide open acces to the bearing. Then simply slide our tool in and use your grease gun to lubricate your bearings. Our tool has many benefits.

-Decrease maintanence time
-Decrease operating costs
-Decrease material waste from conventional greasing methods
-Increase Reliability of your UTV
-Low Cost
-Designed and produced in the U.S.A
-Precision machined with the highest quality equipment from 6061 solid Aluminum bars giving you a quality piece that will last as long as your newly greased bearings

If you are wondering if you really do need our tool. Consider this, the cost of one bearing alone will cost $22-$40 depending on brand, shipping, taxes, availability etc. Add in the time it will take you to replace them OR the added cost the have your dealer or shop do it for you. For the cost of one bearing replacement alone you are over half way to purchasing a tool that will simplify life for you.

Our tool features a benefits over the competition by being design with a double o ring seal to make sure the bearing is greased completely. The more grease inside the better!

Do yourself a favor cut down on down time an increase time on the trail! Order our tool today

Our tool fits all 44MM split bearings found in the following models.

Please be advised, that though we strive to make our tool as simple to use as possible, that differences in end user tools may require additional work. It has come to our attention that certain grease gun ends may require you to remove the two radius arm bolts and sliding the axle inwards slightly to allow room for your end to snap on. If you have any questions with these please contact us.

Although we have put effort into compiling this list. Please verify fitment before ordering.

Front

Ranger 500 EFI : 2010
Ranger 570 Full Size : 2015+
Ranger 570 Crew Full Size : 2015+
Ranger 800 EFI : 2010-2014
Ranger 800 Crew : 2010-2014
Ranger 800 6x6 : 2011+
Ranger 900 XP : 2013+
Ranger 900 Crew : 2015+
Ranger 900 Diesel : 2012-2014
Ranger 900 Crew Diesel : 2011-2014
Ranger XP 1000 : 2017
RZR 570 : 2012-2015
RZR S 800** : 2009-2014 (with hub conversion)
RZR 800** : 2008-2014 (with hub conversion)
RZR 4 800 : 2010-2014
RZR 900 : 2011+
RZR 4 900 : 2011+
RZR S 900 : 2015+

RZR 900 XP : 2011+
RZR 1000 : 2014+
RZR S 1000 : 2016+
RZR XP Turbo : 2016+
RZR 4 1000 : 2014+ : 2014+
Scrambler 850 : 2014-2015
Scrambler 1000 : 2014+
Sportsman 550/Touring/X2 : 2010-2014
Sportsman 850/Touring/X2 : 2012+
Sportsman 1000/Touring/X2 : 2015+

Rear

Forest 850 EU : 2015
Forest 1000 EU : 2015
General : 2016+
RZR 900 : 2011+
RZR 4 900 : 2012+
RZR S 900 : 2015+
RZR 900 XP : 2011+
RZR 1000 : 2014+
RZR S 1000 : 2016+
RZR 1000 Turbo : 2016+
RZR 4 1000 : 2014+
Scrambler 850 : 2014-2015
Scrambler 1000 : 2014+
Sportsman 550/Touring/X2 : 2010-2014
Sportsman 850/Touring/X2 : 2012+
Sportsman 1000/Touring/X2 : 2015+

We have had questions regarding the hub conversions on the 800 RZR models. The answer is yes it will work even if you have not had the hub conversions. The conversion was a Polaris upgrade for the 09 and early 10 model years. Then became standard equipment. It was first believed by many 800 RZR owners that the upgraded part was completely different. However, the bearings are all the same between all models. The difference is the later model and early model upgrade kits, hubs were stronger and thus had a different design. So to answer people questions we made sure to note that this tool DOES in fact fit all front 800 bearings in all models.

Warranty exclusively applies to workmanship and manufacturing defects upon receiving your tool.

Warranty will not be given due to misuse or negligence while using your grease tool.

Any damages during shipping are to be reported within 24 hours of receiving your tool. Damages should be reported along with photos of any related articles (boxes, envelopes, packing materials or other evidence to further support damage in transit)

Only one tool included. Pictures are for representation purposes only.

This Universal mount allows you to mount an OnX6 20" or S8 20" on your vehicle with little to no difficulty. There are two adjustable mounting positions along with one solid mount position in the center, giving you ease of installation to your specific application.

Includes:

• x1 20" Universal, OnX6/S8 20" U-Cradle Mount Kit

Pro & Sport 3-pin, Hi-beam Harness-2 light max 150 watts

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our 3 pin lights, this includes OnX6, S8, and XL Series lights

It includes a tap in for your Hi-Beams to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED lights listed above.

Applicable to the following products:

• OnX6 Series
• S8 Series
• XL Series

(NOTE THIS HARNESS CAN ONLY HANDLE 150WATTS)

Pro & Sport 2-pin, Hi-beam Harness-2 light max 150 watts

This universal 12v wiring harness is capable of powering up to 12 amps and has been specifically designed for our 2 pin lights, this includes Squadron Racers, Squadron Pros, Squadron Sports, S2 Racer, S2 Pros, fuegos, PreRunners, and LaPaz lights.

It includes a tap in for your Hi-Beams to provide power to the lights. This harness comes ready to power up to two (2) Baja Designs LED/HID lights listed above.

Applicable to the following products:

• Squadron Series
• S2 Series
• Fuegos
• PreRunners
• LaPaz

Pro & Sport 2-pin, 10' Extension

This ten foot extension will allow you to extend one two pin wiring lead to one Baja Designs two pin light.

Compatible Products:

• Squadron/S2 product line
• 2-Pin Wiring Harnesses

This harness allows you to utilize the built-in dimming feature found on XL Pro and XL80 LED Motorcycle Lights. This includes one bullet connector that goes directly to your XL Motorcycle Light and a ring terminal that goes to a frame/chassis ground.

This switch will easily dim the light from full brightness to 20% output. Please keep in mind our lights are not DOT approved or street legal. It is up to rider discretion if being used on the street.

The Baja Designs XL Pro/XL80 Mode Harness contains:

· Push Button Switch

· Wiring Harness with Plug and Play connector

Applicable to the following products:

• XL Pro
• XL80

Conveniently set the brightness of your Squadron Dual Sport Kit to match riding conditions. Often auxiliary lights are too bright or have too wide a lighting pattern to operate at full power during the day or under certain road conditions.

This rock guard/light cover fits the Squadron-R Pro & Squadron-R Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your Squadron-R LED lights. If you are looking for extra protection from your riding environments and a cool cover, then the Squadron-R rock guard is your answer!

This rock guard/light cover fits the Squadron Pro & Squadron Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your Squadron LED lights.If you are looking for extra protection from your riding environments and a cool cover, then the Squadron rock guard is your answer!

This rock guard/light cover fits the XL-R 80, XL-R Racer, XL-R Pro & XL-R Sport. It is designed for daytime use, to protect from harsh terrain that may throw dirt, dust and rocks at your XL-R LED lights. If you are looking for extra protection from your riding environments and a cool cover, then the XL-R rock guard is your answer!

The S8 Rock Guards are designed for day or nighttime use. We have three color options to suit all your needs - whether you need a black light cover to comply with local laws, want to use the amber guard to quickly switch between white and amber light, or the clear rock guard for additional protection from sand blasting and rogue rocks.