• Strengthen front end
• Protect your axles
• Adds cushion to shocks
• One kit that does it all!

The ultimate suspension and drive train problem solver for your X3! Our design incorporates your shock tower brace to add the functionality of a limit strap system. Add in our frame gusset plate to strengthen up your front end, and have you prepared to tackle anything.

 If you are looking for a way to save on costly axle replacements and want a way to save your shocks from bottoming out? Tired of trying to enjoy a day of riding only to be cut short because you have an axle popped out of your differential. Don’t let your axles pop out of the differentials anymore, with our limit straps protect your axles & suspension components by preventing the over extension of your  suspension. Our easy to install kit allows to cushion the drop and protect the shocks, axles, & steering components from damage caused by over extension.

We have a unique and simple design that utilizes the shock tower brace as a mounting point for the limit straps. No more need for complex mounting needed, with our system you get two solutions from one single kit.

Our shock tower brace is machined out of  solid billet aircraft grade aluminum on state of the art equipment to ensure you get the best quality parts available. We also incorporate a unique hard coat anodize process that involves a ceramic infused mixture to give your brace an even higher quality finish and longevity. As always we provide a nice laser etch logo to let everyone know who you trust for your needs!

Our limit straps are produced specifically for us using the same high strength webbing material used seat belt material used in all OEM manufacturing. We then raise the bar even more by providing a double layer of sewn material. Our strap webbing is designed to have a load strength of twelve thousand pounds! You can rest assured our system will do its job time and time again.

Your kit will be shipped with all Grade 10.9 Metric coated hardware and instructions for installation.

Shock tower braces are available in additional colors. Typically a one week lead time will apply to colors other than standard black.

Be sure to view our quick detach sway bar links to have the perfect suspension system!

Products may vary slightly from time to time and without notice. We reserve the right to improve our products at anytime through whatever means we see necessary.

As is the norm with all products are proudly manufactured here in the U.S.A!!

Lifetime warranty is included which protects you from workmanship and defects. Warranty does not cover wear items, or extensive abuse beyond the scope of this product.

Features include:

6061 billet aircraft grade aluminum

Superior straps made from dual layer material rated at 12,000 lbs breaking strength to ensure your machine is well protected

Grade 10.9 hardware

Stainless Spacers

Proudly made in the U.S.A

Kit includes straps, hardware, billet aluminum shock tower brace, and frame gusset plate.

FRAME GUSSET PLATE

The gusset plate  is a necessary solution in many cases. The gusset plate helps to make X3  more rigid by reducing deflection in the front end of the machine, as well as adding a little bit of beef to the front of the machine.

When using the X3 to its potential there is a very high risk of causing extra deflection in the front end letting the upper shock mount area and the lower frame where the control arms connect move undesirably from the shock load. Tie your frame together with this gusset and our upper shock tower brace making it best way to protect that precious radiator fan from permanent and expensive damage.

You must use this with either our limit strap system or with our aluminum shock tower brace to be effective. This gusset plate will not attach to your factory pieces.

Made from 3/16 mild sheet steel, tig welded and includes a grommet for hoses to pass through without damage.

If you are looking for the strongest pull plate on the market for the most affordable price, look no further, because you have arrived at your destination.

When we thought up the interchangeable pull plate, we were greeted with overwhelming success and a real game changer solution for many people in the market. However, we still had a vast majority of people who just simply wanted a more basic and affordable option. They didn't need the versatility that came with our interchangeable plate, nicknamed the B.A.M.F plate for short, and just needed an upgraded piece compared to the factory unit at an affordable price. Well, we came in with an answer.

Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for anodize and then round all of our corners to give it a look that really pops and will wow anyone.

The anodize used is not your typical decorative anodize but yet it is a ceramic based hard coat anodize that not only lasts longer but can be up to two times stronger than standard anodize. This ensures that your plate will be protected from abrasions and corrosion for a long time to come.

Our plate is accompanied by stainless hardware mounting the hook to the plate and as our plate has a full lifetime warranty against any workmanship and defects and is produced right here in the U.S.

We pride ourselves on introducing the first changeable pull plate for your Can-Am X3. The CA Technologies B.A.M.F Pull Plate allows you to quickly change between different attachments depending on what your needs are. Our pull plate is guaranteed to perform flawlessly or your money back!

• -Solid Billet Aluminum 1.5″ 6061 construction
• -Precision machined for a beautiful finish and fit every time
• -Solid B18.3 Grade 8 Shoulder Bolts that maintain a shear rating of 84,000 lbs
• -Lifetime Warranty

***Important Note*** Most two inch hitches that you purchase will require the end going into the receiver to be trimmed so that it will fully slide in.

Want something completely indestructible? Do you want something so awesome it almost got it banned from 11 states? If you answered yes, we have you covered.

Next in the line up of high quality, unique, and useful parts from CA Technologies is a pull plate unlike any other. Not only is it thicker then your third grade teachers coke bottle glasses, it holds a single feature that stands above the rest. It is interchangeable.

Interchangeable with what you may ask? Well then allow us to explain.

Our pull plate is designed in such a way that within a matter of seconds you will easily and effortlessly change between different attachments of your choosing. Currently those attachments consist of 3 major components. The Tow Hook, for tow straps, chains or winch cables. The Tow Loop for small cables, synthetic ropes, or very large clevis'. And last but nor least the standard two inch receiver.

***Important Note*** Most two inch hitch's that you purchase will require the end going into the receiver to be trimmed so that it will fully slide in.

Now, you may be wondering just how fast you can interchange between attachments? Or perhaps you are reluctant to believe our claim of within a matter of seconds. Watch this short video where in just 79 seconds to be exact we change between all three attachments. (Warning the blazing speed seen in this video is not for the faint of heart. We will not be responsible for seizures induced by the lightning quick flashes, or permanent burns to your retina and/or eye muscle strain from trying to follow the action.)

https://youtu.be/eH128CZvt0M

So now that the excitement is all over lets get down to business. What can you expect to get from our pull plate? You will have the ability to quickly swap between attachments and NEVER have to remove the main base of the plate. That means once mounted you have no need to mess with the radius rods anymore. You will simply remove the two shouldered bolts from the pull plate, swap the pieces you want, then re tighten. It really is as simple as that. And if you don't believe me, revisit the video above.

All of our plates are machined by us here in the U.S.A. We machine them out of a solid piece of Billet 6061 Aluminum along with the tow hook, and tow loop attachments. The only steel attachment is the 2 inch receiver which is machined from 1018 steel. Each pull plate comes in raw aluminum, if you would like colors please email us so we can accommodate you. 2 inch receivers come in a standard black texture powder coat, however we can arrange other colors for you.

Clean Simple Bed Storage for your X3!

No bulky hardware or funky clamps to figure out. Just remove two bolts and drill two holes and your ready to carry all your gear with you!

Bed bags feature a full top Zipper enclosure with net storage pockets inside.

Perfect for tool bags, soft coolers, jackets, and just about anything else you can shove in it!

***BED STORAGE BAGS ARE NOT FOR STORING OR CARRYING FUEL OR FLAMMABLE SUBSTANCES OF ANY TYPE***

Features

• Large Aluminum Catch Can

• 3 Stage Internal Baffling System

• High Quality AN Fittings

• Oil & E85 compatible Push Lok AN Hose

• CAD Designed and CNC Cut

• TIG Welded in House, Made In USA!!

• 90 Degree Ball Drain Valve for clean mess free draining

• 3 inch filter with Outerwear

• Stainless Steel Hose Support Mount

• Powder Coated Gloss Black

The Treal Performance Oil Catch Can is a great upgrade to keep your Can-Am X3 making good, cleaner, safer power by keeping crank case vapors, fumes and fluids out of your intake system. which can lower the octane level of the fuel burning in the engine creating higher risk of detonation, that is never a good thing to happen. Our catch can system will catch all of those harmful vapors and fluids separating them from the intake system and keeping it much cleaner and less likely to run in to detonation issues. The catch can system can also let the crank case breath more freely which can increase piston ring sealing which can increase power and keep the rings from fluttering.

A catch can / breather system is strongly recommend on all force induction engines, especially when increasing boost pressure or running fuel like E85 or Methanol as blow by will increase which will increase the amount of crank case pressure along with create more harmful vapors and fluid. Our Treal Performance Catch Can / Breather System is the solution to keep all of that under control and the engine happy.

Another Benefit to our Treal Performance Catch Can/ Breather System is help keep those vapors and fluids from collecting in the engine oil, extending the life of the oil by it not breaking down faster with collecting fuel and condensation. The Treal Performance catch can/ breather system lets it evaporate out of the crankcase and oil and collect in our large catch can.

We have designed our Treal Performance Catch Can/ Breather System to be mounted up higher with the Breather filter and outerwear up above the rear deck keeping it out on the way from dirt, sand or water that would be flying around from the tires. This design makes it much harder from dirt, mud, sand, or water from reaching the breather filter area keeping the filter cleaner and less likely for outer environment contaminant to enter in to the catch can, which is very important! If you ride in deep mud or water our breather system can easily add a hose to the top of the catch can and move the filter up even higher to the top of the cage. We recommend cleaning the filter and outerwear after each ride.

 PLEASE NOTE 2 WEEK LEAD TIME ON SHOCK TOWER KITS

CA Technologies Billet upper shock brace is a high quality piece built for a multitude of uses. Although its a main focal point and a real eye catcher, it gets deeper than that.

We engineered our shock tower brace to be used in several applications. Utilizing our brace as the main mounting point for things like limit straps, and a farme gusset kit, this will be the center of vehicle protection for your X3.

Our brace is designed in house to be as close of a replacement to factory fitment as possible, while still strengthening key components. It is a direct replacement, so no flipping of shocks, trimming of plastics, or modifications of any kind to run this brace. 

Milled from solid Billet 6061 Aluminum bar stock. Then finished with a hard coat ceramic anodize fro abrasion resistance. Our logo is then milled into the top to compliment the brace and really make the whole piece pop. 

Everything is designed and manufactured here in the U.S at our facility in Cleveland, TN.

Our brace and all of its components carry a lifetime warranty against workmanship and defects. 

Frame Gusset Plate

The gusset plate  is a necessary solution in many cases. The gusset plate helps to make X3  more rigid by reducing deflection in the front end of the machine, as well as adding a little bit of beef to the front of the machine.

When using the X3 to its potential there is a very high risk of causing extra deflection in the front end letting the upper shock mount area and the lower frame where the control arms connect move undesirably from the shock load. Tie your frame together with this gusset and our upper shock tower brace making it best way to protect that precious radiator fan from permanent and expensive damage.

You must use this with either our limit strap system or with our aluminum shock tower brace to be effective. This gusset plate will not attach to your factory pieces.

Made from 3/16 mild sheet steel, tig welded and includes a grommet for hoses to pass through without damage.

 *THIS KIT DOES NOT INCLUDE LIMIT STRAPS! IT IS THE SHOCK TOWER BRACE, AND GUSSET KIT ONLY!

Our Squadron® Pro packs 4,900 Lumens at 40 watts that will truly annihilate the night. Don’t let this light fool you, although compact in size this LED auxiliary light will literally blind you with brightness. The Pro comes equipped with a sleek black gloss aluminum housing and outshines the competition through both appearance and performance. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

Includes:

• Squadron® Pro LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

The Geiser Performance Bumper and Bulkhead Combo adds superior strength to the front suspension and chassis as well as provide a stylish front bumper with a bolt-on skid plate. All made from 4130 chromoly.

Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut to reach all four corners of your small to mid-sized vehicle with some wiggle room on each lead to route the wiring any desired way. This kit includes four 400 lumen rock lights and wiring for a truly turn key kit.

These LED lights are waterproof and can be mounted virtually anywhere. All that is needed is 12 volt power. They have a 180 degree optic to illuminate your wheel wells or anywhere else you need a bright and smooth light.

Caution: Rock Light can get very hot when used for long periods of time. Please use caution when handling or installing.

Available Colors:

• Amber
• Blue
• Green
• Red
• White

Included With Kit:

• Wiring Harness
• x4 Rock Lights

NOTE: These lights will only work with a 12 volt charging system.

Looking for a custom storage solution for your SDR Doors?

Dont use some "Universal Fit" bags, our door storage bags are made to our specification and fit our doors perfectly.

Installation is easy with no bolts or screws, just drill two additional holes and use the supplied push pins!

Sold as a pair - Left and Right.

These Bags Fit BOTH the two and Four Seat Front Doors.

Fronts and rears available separately.

Replaces the factory piece with the Geiser Performance 4130 chromoly steel shock tower mount. Fits all Maverick X3 models.

*Raw products are not powder coated clear. If you choose to purchase raw, it will need to have some coating applied otherwise it will rust. Clear coat is available for an additional cost upon special request.

These upper and lower a-arm braces replace the weak factory gusset plates as well as add an additional brace for the upper arms.

If you already have the Geiser Performance Bulkhead, you will only need one of the lower a-arm brackets.

Combine the strength of the EVO Severe Duty Belt and the protection from the Geiser Performance Clutch Liner to get the peace of mind you need!

*Includes only liner and belt. Does not include clutch housing.*

EVO has sourced an X3 severe duty drive belt that outlasts the factory belt by a large margin - We are seeing roughly 3x the belt life as compared to the OEM belt.

The NEW one-piece Geiser Performance clutch housing liner lines the inside of the factory clutch cover. It's purpose is simply to strengthen the cover and protect it from breaking when a belt breaks. Constructed of .080 aluminum. (This piece will be shipped 3/13).

If you are one of the more extreme riders out there, that push things to the limits and are the first to find the known failure points then you have likely experienced tie rod failure on your Can-Am X3. Or perhaps you are just the type that prefers to upgrade it before it breaks. Regardless of which category you fall into we have exactly what you need.

Tie rods are machined from the exact same Billet aircraft grade hex aluminum as our radius rods, so you know for a fact they will take a beating. Our tie rods are machined to accept the factory steering rack end so nothing additional is needed to install.

Rods feature our signature ceramic based hard coat anodize for increased wear resistance, as well as the absolute best heim joints on the market the FK JMX rod ends. In steering components especially we only use the best of the best and do not give options of the KMX heims as we do with other components.

NOTE: Pictures currently only show KMX heims. However those will be updated and you will receive JMX heims ONLY.

Effective 11/1/19 all items will ship in black finish with no millings. Millings can be added on a case by case basis. *Actual product vary slightly from item pictured.

OPTIONAL BUMP STEER REDUCTION SPACERS 

Our tie rods also feature patented ST geometry that place a long spacer on the upper side which shifts the tie rod geometry further down than stock helping reduce an issue known as bump steer. Bump steer is essentially oscillation of the steering components as the suspension components cycle up and down. as the suspension compresses and extends, when the steering geometry is not in line with the suspension geometry this will cause the vehicle to unexpectedly change the toe degrees. This in turn causes extra negative feedback in the steering wheel and will drastically increase resistance in drive ability as well as increased wear on other components.

We call this a bump steer reduction as that is more closely what it is. Since we must operate within the mounting points of the factory knuckle, there is only so much adjustment that can be made. However, this kit will almost completely rid your vehicle of bump steer.

KIT SHOWN IN RED FOR PICTURES ONLY. PRODUCTION KITS ARE POWDER COATED BLACK

Our 4 piece Gusset kit is exactly what the front of your X-3 needs! This kit is simple and easy to install and makes all a-arm mounting points double shear. both upper gussets tie back into the chassis for the ultimate in strength.

Add our front bumper kit for the ultimate in strength and style!

Does not fit RC!

Although compact at 3” by 3”, don’t be fooled by its size, the Squadron Pro IR 850nm LED light is more powerful than most larger lights on the market today. This light is perfect for covert applications such as military, and hunting.

950 nm Specifications:
LED: 4 Osram 940nm LEDs
mW: 3960mW
mW/sr: 1700mW/sr
Weight: 12 ounces
Wattage/Amps/Volts: 11W, .80A at 13.80Vdc, .40A at 27.6Vdc
Dimensions: 3.07” x 2.76” x 3.07”
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Built-In Overvoltage Protection
Exceeds MIL-STD810G (Mil-Spec Testing)
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Includes:

• Squadron Pro, IR LED Light
• Mounting Bracket

The S2 Sport features the same quality, fit, and finish that is synonymous with the Baja Designs name, at an attractive price point. The S2 Sport is ideal as a fog, cornering, rack, or reverse light and much more. A compact and powerful light, featuring quality that is second to none.

Includes:

• S2 Sport LED Light
• Mounting Bracket

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Cornering: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Squadron Racer Racer Edition
Baja Designs is proud to introduce the Squadron Racer Edition, with 4,300 lumens. The Squadron Racer Edition throws light an average of 40% further than the Squadron Pro with High-intensity LED, housed in hard anodized and powder coat cast aluminum. Enjoy nearly 50,000 hours of bright, efficient lighting to enhance your nighttime off-roading experiences! As always, Baja Designs provides the best in auxiliary LED lights with a 30 Day Satisfaction Guarantee, and Limited Lifetime Warranty.

Includes:
· Squadron Racer Edition LED Light
· Mounting Bracket


Patterns:

Spot: A longer and narrower 7° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights.

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,328 lumens of pure power, low amp draw of 4.06 amps, and nearly 50,000 hours of LED life. The S8 also features upgraded reflectors, an amber backlit feature, and new scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection!

Includes:
· S8 10” LED Light Bar
· Mounting Brackets

Please note that this light does NOT include a harness and the applicable harness to this light is 640115

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)